Difference between revisions of "3D Printing"

From Pikes Peak Makerspace Wiki
Jump to navigation Jump to search
(384 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
[[File:Level_2_badge.png|alt=|left|frameless|100x100px]]
+
[[File:Level 2 badge.png|alt=Level 2 badge used at Pikes Peak Makerspace|left|frameless|100x100px|PPM TRAINING REQUIRED]]
  
−
'''The 3D Printing Area at Pikes Peak Makerspace (PPM) consists mostly of Level 2 equipment.'''  
+
'''The 3D Printing Area at Pikes Peak Makerspace (PPM) consists mostly of Level 2 equipment.'''
  
−
Additional training is required to use our Level 2 equipment.
+
Additional PPM training is required to use any of our Level 2 equipment.
 +
 
 +
Additional PPM training and then certification is required to use any of our Level 3 equipment.
 +
 
 +
Our trainers are passionate about sharing their knowledge and ensuring a positive learning experience for all.
 +
 
 +
We are grateful for their commitment and dedication to our community.
 +
 
 +
'''3D Printing Area''' hand tools should be marked with <span style="color:#EE9F21">'''orange'''</span> tape or paint.
 +
<br>
 +
<br>
 +
<p style="padding:0.2em 0.4em;  background:#EE9F21; color:#FFFFFF; font-size:15%;"> &nbsp; </p>
  
−
<span style="color:#FFFFFF; background:#EE9F21">&nbsp;3D Printing Area&nbsp;</span> [[3D Printing#Hand Tools|hand tools]] should be marked with <span style="color:#EE9F21">'''orange'''</span> tape or paint.
 
  
 
{{Template:Safety}}
 
{{Template:Safety}}
 +
<br>
 +
<p style="padding:0.2em 0.4em; background:#EE9F21; color:#FFFFFF; font-size:15%;"> &nbsp; </p>
 +
==Classes and Training==
 +
===[[New Member Orientation]]===
 +
 +
===Instructor — Josh Rafail===
  
−
==Classes and Training==
+
===Area Contact — Mathew Palfenier===
 +
:To help out in the 3D Printing Area at PMM, use our #3d-printing channel on Slack.
  
−
===Area Captain -- Trevor Banks===
 
−
===[[Area Captain Duties#3D Printing|Area Captain Duties]]===
 
 
===Classes===
 
===Classes===
−
:Pikes Peak Makerspace announces its [https://www.meetup.com/pikespeakmakerspace/events '''Upcoming events, including classes, on Meetup''']
+
PPM announces all its [https://www.meetup.com/pikespeakmakerspace/events '''Upcoming events, including classes, on Meetup''']
  
 
===Training===
 
===Training===
 +
:'''FDM vs SLA 3D Printing — according to the "new&nbsp;Bing"'''
 +
 +
::''"FDM and SLA are two different types of 3D printing technologies that use different materials and methods to create parts. FDM stands for fused deposition modeling, and SLA stands for stereolithography. Here are some of the main differences between&nbsp;them:''
  
−
:'''[[Introduction to 3D Printing]] class info'''
+
::''FDM uses a heated nozzle to extrude melted plastic filament one layer at a time on a build platform. SLA uses a UV laser to cure liquid resin one layer at a time in a resin&nbsp;tank.''
−
:'''[[Intro to SLA 3D Printing]] class info'''
 
  
−
===Tips===
+
::''FDM can print with a variety of thermoplastic materials, such as ABS, PLA, PETG, and nylon. SLA can print with different types of resin materials, such as standard, engineering, and dental&nbsp;resins.'' 
−
:[https://www.simplify3d.com/support/materials-guide/#all '''Ultimate 3D Printing Materials Guide''']
+
::''FDM has more color options and similar strength in the X and Y directions than SLA. SLA has better surface finish, detail, and speed than&nbsp;FDM.''
−
:'''[https://www.youtube.com/channel/UCLHAxAdvAKJY0niRJZRYMvg Prusa 3D by Josef Prusa] - YouTube channel'''
+
::''FDM is cheaper, more user-friendly, and more reliable than SLA. SLA is more expensive, requires more post-processing, and is more sensitive to environmental factors than&nbsp;FDM.''
−
:Clear the resin trays of the SLA printers carefully and completely to avoid cross-contamination.
+
::''FDM is suitable for basic proof-of-concept models, quick and low-cost prototyping, and simple parts that might be machined. SLA is ideal for high-detail parts, molds, patterns, and functional parts that require tight tolerances and smooth&nbsp;surfaces."''
 +
<br>
 +
:'''[https://docs.google.com/document/d/19Kd1ZjBzIkBxqTE1KEoXh08TGZZaiooPNXcRInKPV5E/edit?usp=drivesdk Intro To 3D Printing] — new class info from Josh&nbsp;Rafail'''
  
−
===For Help===
+
:'''[https://help.prusa3d.com/ PRUSA KNOWLEDGE BASE]'''
−
:Message in PPM Slack channel #3d-printing
+
:'''[https://help.prusa3d.com/materials Prusa Material Table]'''
 +
:'''[https://www.youtube.com/channel/UCLHAxAdvAKJY0niRJZRYMvg Prusa 3D by Josef Prusa]''' — YouTube channel
 +
:[https://www.simplify3d.com/support/materials-guide/#all '''Ultimate 3D Printing Materials Guide'''] — SIMPLYFY3D
 +
:
  
−
==Equipment Lists==
+
== Equipment Lists ==
  
−
===3D Printing Equipment -- Level 2===
+
=== 3D Printers===
−
{| class="wikitable sortable"
+
{| class="wikitable"
−
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#ee9f21; color:#ffffff;"
+
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#ee9f21; color:#000000;"
−
| style="vertical-align:middle;" |'''Picture'''
+
| style="vertical-align:middle;" | Picture
−
|'''Item'''
+
|Item
−
|'''Manufacturer'''
+
|Manufacturer/<br>Model
−
|'''Model<br>Number'''
+
|Build<br>Volume
−
|'''Estimated<br>Value'''
+
|Upgrades
−
|'''Manual'''
 
−
|'''Owner'''
 
−
|'''Status<br>Up/Down'''
 
−
|'''Problem<br>Description'''
 
 
|-
 
|-
 
|
 
|
−
|'''Prusa MK2S'''  
+
|'''3D Printer'''
−
'''(HAYWIRE)'''<br>
+
'''#1'''  
−
[[File:Level_2_badge.png|left|frameless|55x55px]]
+
 
−
|[https://www.prusa3d.com/ PRUSA RESEARCH]
+
[[File:Level_2_badge.png|alt=Level 2 badge|left|frameless|55x55px]]
−
|Prusa MK2S
+
|Prusa /  
−
|<p style="text-align:right;">$350</p>
+
MK3S
−
|Included
+
|250x210x200 mm
−
|PPM
+
|(stock)
−
|Up
 
−
(01/19/22)
 
−
|
 
 
|-
 
|-
−
|
+
|[[File:Prusa 2.jpg|center|frameless|180x180px]]
−
|'''Prusa Mk2s'''  
+
|'''3D Printer'''
−
'''(MEDUSA)'''<br>
+
'''#2'''  
−
[[File:Level_2_badge.png|left|frameless|55x55px]]
+
 
−
|[https://www.prusa3d.com/ PRUSA RESEARCH]
+
[[File:Level_2_badge.png|alt=Level 2 badge|left|frameless|55x55px]]
−
|N/A
+
|Prusa /  
−
|<p style="text-align:right;">$1,000</p>
+
MK3S
−
|Included
+
|250x210x200 mm
−
|PPM
+
|(stock)
−
|Up
 
−
(01/19/22)
 
−
|
 
 
|-
 
|-
−
|
+
|[[File:Prusa 3.jpg|alt=Prusa 3D printer|center|frameless|175x175px]]
−
|'''Prusa Mk2s'''
+
|'''3D Printer'''
−
'''MMU2'''
+
'''#3'''  
  
−
'''(Multi Material Unit)'''<br>
+
[[File:Level_2_badge.png|alt=Level 2 badge|left|frameless|55x55px]]
−
[[File:Level_2_badge.png|left|frameless|55x55px]]
+
|Prusa /  
−
|[https://www.prusa3d.com/ PRUSA RESEARCH]
+
MK3S
 
|
 
|
 
|
 
|
−
|Included
+
*E3D Revo Hotend
−
|PPM
+
*2 Fan Upgrade
−
|Down
+
*Quick fit nozzle
−
(12/10/21)
+
*Obsidian nozzle
−
|MMU 
+
*Bed w/ PEI coating
−
needs repair.
 
 
|-
 
|-
−
|[[File:MR T.jpg|alt=MR T 3D printer|center|frameless|200x200px]]
 
−
|'''Taz 5'''
 
−
'''(MR. T)'''<br>
 
−
[[File:Level_2_badge.png|left|frameless|55x55px]]
 
−
|[https://www.lulzbot.com/ LULZBOT]
 
−
|Taz 5
 
−
|<p style="text-align:right;">$1,200</p>
 
−
|Included
 
−
|PPM
 
−
|Down
 
 
|
 
|
−
|-
+
|'''3D Printer'''  
−
|[[File:TIZZY.jpg|alt=TIZZY 3D Printer|center|frameless|200x200px]]
+
'''(MEDUSA)'''
−
|'''Taz 5'''
 
−
'''(TIZZY)'''<br>
 
−
[[File:Level_2_badge.png|left|frameless|55x55px]]
 
−
|[https://www.lulzbot.com/ LULZBOT]
 
−
|Taz 5,
 
−
KITTAZ
 
−
|<p style="text-align:right;">$1,200</p>
 
−
|Included
 
−
| PPM
 
−
|Up.
 
−
Repaired &<br>firmware updated,<br>by Joe&nbsp;Hall
 
  
−
(01/23/22)
+
[[File:Level_3_badge.png|alt=Level 3 badge|frameless|55x55px]]
 +
|Prusa /  
 +
MK3S
 
|
 
|
−
|-
 
−
|[[File:ANYCUBIC_3D_Printer.jpg|alt=ANYCUBIC 3D Printer|center|frameless|200x200px]]
 
−
|'''ANYCUBIC PHOTON MONO 2K'''
 
−
'''resin printer'''<br>
 
−
[[File:Level_2_badge.png|left|frameless|55x55px]]
 
−
|[https://www.anycubic.com/ Anycubic]
 
−
|N/A
 
−
|<p style="text-align:right;">$200</p>
 
−
|N/A
 
−
| PPM
 
−
|Up
 
 
|
 
|
−
|-
+
*E3D Revo Hotend
−
|'''Picture'''
+
*2 fan upgrade
−
|'''Item'''
+
* Quick fit nozzle
−
|'''Manufacturer'''
+
*Brass nozzle
−
|'''Model<br>Number'''
+
* Bed w/ PEI coating
−
|'''Estimated<br>Value'''
+
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
−
|'''Manual'''
+
| style="vertical-align:middle;" |
−
|'''Owner'''
 
−
|'''Status<br>Up/Down'''
 
−
|'''Problem<br>Description'''
 
−
|}
 
−
 
 
−
 
 
−
===3D Printing Equipment -- Other===
 
−
{| class="wikitable sortable"
 
−
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#ee9f21; color:#ffffff;"
 
−
| style="vertical-align:middle;" |'''Picture'''
 
−
|'''Item'''
 
−
|'''Manufacturer'''
 
−
|'''Model<br>Number'''
 
−
|'''Estimated<br>Value'''
 
−
|'''Manual'''
 
−
|'''Owner'''
 
−
|'''Status<br>Up/Down'''
 
−
|'''Problem<br>Description'''
 
−
|-
 
−
|[[File:INFRARED THERMOMETER.jpg|alt=INFRARED THERMOMETER|center|frameless|133x133px]]
 
−
|'''INFRARED THERMOMETER'''
 
−
|CEN-TECH
 
 
|
 
|
 
|
 
|
 
|
 
|
−
|PPM
 
−
|Up
 
 
|
 
|
 +
|}
 +
 +
===3D Printing Equipment — Level 1===
 +
{| class="wikitable"
 +
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important;; background-color:#ee9f21; color:#000000;"
 +
| style="vertical-align:middle;" |Picture
 +
|Item
 +
|Manufacturer/<br>Model
 +
|Reference<br>Materials
 
|-
 
|-
−
|[[File:UV Curing Box.jpg|alt=UV Curing Box|200x200px|center|frameless]]
+
|[[File:3Doodler create.jpg|alt=3Doodler create|133x133px|center|frameless]]
−
|'''UV curing box'''
+
|'''3Doodler create'''
−
(6x6x10 inches)
+
|3Doodler
−
|PPM
+
 
−
|
+
STAR TREK
−
|
+
|'''[https://learn.the3doodler.com/getting-started/ Getting Started]'''
−
|
 
−
|PPM
 
−
|Up
 
−
|
 
 
|-
 
|-
 
|[[File:Dryer oven.jpg|alt=Dryer oven|200x200px|center|frameless]]
 
|[[File:Dryer oven.jpg|alt=Dryer oven|200x200px|center|frameless]]
Line 176: Line 138:
 
'''with timer'''
 
'''with timer'''
  
−
(12x12x12 interior)
+
(12"x12"x12" interior)
 
|Curtin Matheson
 
|Curtin Matheson
 
|
 
|
−
|
+
|-
−
|none
+
|[[File:IMPULSE SEALER new.jpg|alt=IMPULSE SEALER new|center|frameless|120x120px|link=https://wiki.pikespeakmakerspace.org/index.php/File:IMPULSE_SEALER_new.jpg]]
−
|PPM
+
|'''IMPULSE HEAT SEALER'''
−
|Up
+
'''12" w cutter'''
 +
|Midwest Pacific,
 +
MP-12C
 
|
 
|
 
|-
 
|-
Line 188: Line 152:
 
|'''filament dryer box'''
 
|'''filament dryer box'''
 
|PPM
 
|PPM
−
|N/A
 
−
|
 
−
|
 
−
|PPM
 
−
|Up
 
−
|
 
−
|-
 
−
|[[File:3Doodler create.jpg|alt=3Doodler create|133x133px|center|frameless]]
 
−
|'''3Doodler create'''
 
−
|
 
−
|STAR TREK
 
−
|
 
−
|
 
−
|PPM
 
−
|
 
 
|
 
|
 
|-
 
|-
 
|[[File:Fume Extractor.jpg|alt=Fume Extractor|200x200px|center|frameless]]
 
|[[File:Fume Extractor.jpg|alt=Fume Extractor|200x200px|center|frameless]]
 
|'''Fume Extractor'''
 
|'''Fume Extractor'''
−
|PACE
+
|PACE  
 +
<nowiki> 8888-0825</nowiki>
 +
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
 +
| style="vertical-align:middle;" |
 +
|
 
|
 
|
 
|
 
|
−
|none
 
−
|PPM
 
−
|?
 
−
|needs filters,
 
−
probably
 
−
|-
 
−
|'''Picture'''
 
−
|'''Item'''
 
−
|'''Manufacturer'''
 
−
|'''Model<br>Number'''
 
−
|'''Estimated<br>Value'''
 
−
|'''Manual'''
 
−
|'''Owner'''
 
−
|'''Status<br>Up/Down'''
 
−
|'''Problem<br>Description'''
 
 
|}
 
|}
  
−
===3D Printing -- Computer&nbsp;&nbsp;===
+
<gallery widths="200" heights="125">
−
{| class="wikitable sortable"
+
File:IMPULSE SEALER LABEL.jpg|alt=IMPULSE HEAT SEALER label|'''IMPULSE SEALER label'''
−
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#ee9f21; color:#ffffff;"
+
</gallery>
−
| style="vertical-align:middle;" |Picture
+
 
−
|'''Item'''
+
===3D Printing — Computers&nbsp;&nbsp;===
−
|'''Manufacturer'''
+
{| class="wikitable"
−
|'''Model<br>Number'''
+
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important;; background-color:#ee9f21; color:#000000;"
−
|System
+
|Item
−
|'''Estimated<br>Value'''
+
|Application<br>Software
 +
|Manufacturer/<br>Model
 
|CPU
 
|CPU
−
|Memory
+
|Memory/<br>Storage
−
| Storage
+
|System<br>Software
−
|Software
 
−
|'''Owner'''
 
−
|'''Status<br>Up/Down'''
 
−
|'''Problem<br>Description'''
 
 
|-
 
|-
−
|[[File:3D Printing laptop.jpg|alt=3D Printing laptop|center|frameless|133x133px]]
+
|'''laptop computer'''
−
|'''computer (laptop)'''
+
|[https://www.prusa3d.com/page/prusaslicer_424/ PrusaSlicer]
−
|hp
+
 
−
|EliteBook 8570w
 
−
|Windows 10 Pro
 
−
|
 
−
|Core-i7 2.30&nbsp;GHz
 
−
|4 GB
 
−
|750 GB HDD
 
−
|
 
−
[https://www.prusa3d.com/page/prusaslicer_424/ PrusaSlicer]
 
 
[https://lychee.mango3d.io/ Lychee&nbsp;Slicer]
 
[https://lychee.mango3d.io/ Lychee&nbsp;Slicer]
 +
 
[https://www.repetier-server.com/ Repetier&#8209;Server]
 
[https://www.repetier-server.com/ Repetier&#8209;Server]
−
|PPM
+
|Dell
−
|Up
+
 
 
|
 
|
−
|-
 
−
|'''Picture'''
 
−
|'''Item'''
 
−
|'''Manufacturer'''
 
−
|'''Model<br>Number'''
 
−
|System
 
−
|'''Estimated<br>Value'''
 
−
|'''CPU'''
 
−
|'''Memory'''
 
−
|'''Storage'''
 
−
|'''Software'''
 
−
|'''Owner'''
 
−
|'''Status<br>Up/Down'''
 
−
|'''Problem<br>Description'''
 
−
|}
 
−
 
−
 
−
===3D Printing -- Not Working&nbsp;&nbsp;===
 
−
{| class="wikitable sortable"
 
−
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#ee9f21; color:#ffffff;"
 
−
| style="vertical-align:middle;" |Picture
 
−
|'''Item'''
 
−
|'''Manufacturer'''
 
−
|'''Model<br>Number'''
 
−
|'''Estimated<br>Value'''
 
−
|'''Manual'''
 
−
|'''Owner'''
 
−
|'''Status<br>Up/Down'''
 
−
|'''Problem<br>Description'''
 
−
|-
 
 
|
 
|
−
|'''computer'''
+
| Microsoft Windows 10
−
'''(Slicing&nbsp;machine),'''
 
−
 
 
−
"M-DESIGN-3-G"
 
−
|hp
 
−
|Z200
 
−
|<p style="text-align:right;">$500</p>
 
−
|N/A
 
−
|PPM
 
−
|Up
 
−
|Windows 7
 
 
|-
 
|-
−
|
 
−
|'''computer'''
 
−
'''(Resin&nbsp;machine),'''
 
−
 
−
"M-DESIGN-5-G"
 
 
|
 
|
 
|
 
|
−
|<p style="text-align:right;">$300</p>
 
−
|N/A
 
−
|PPM
 
−
|Working(?)
 
−
 
−
but not online, Windows 10
 
 
|
 
|
−
|-
 
 
|
 
|
−
|'''various Raspberry Pi boards'''
 
 
|
 
|
 
|
 
|
−
|<p style="text-align:right;">?</p>
+
|}
−
|N/A
+
'''Hand Tools'''<gallery widths="200" heights="125">
−
|PPM
+
File:INFRARED THERMOMETER.jpg|alt=INFRARED THERMOMETER|'''INFRARED THERMOMETER'''
−
| Working(?)
+
</gallery>
 +
:'''3D Printing Area''' hand tools should be marked with <span style="color:#EE9F21">'''orange'''</span> tape or paint.
 +
: Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.
 +
[[Donations Received|'''Donations Received''']]
  
−
but not online
+
[[Wish List#3D Printing|'''Wish List''']]
−
|
+
: Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make.
−
|-
 
−
|
 
−
|'''hot air'''  
 
−
'''material (pellet)'''
 
  
−
'''dryer'''
+
==Benefits==
−
|[http://www.ppe.com/ Plastic Process Equipment]
 
−
|THD-U SERIES
 
−
|<p style="text-align:right;">?</p>
 
−
|Yes
 
−
|PPM
 
−
[[Donations Received|(donated by TITAN ROBOTICS)]]
 
−
|Down
 
−
|Under construction
 
−
|-
 
−
|
 
−
|'''3D Printer<br>(high temp)'''
 
−
|Stratasys
 
−
|N/A
 
−
|<p style="text-align:right;">$1,000</p>
 
−
|N/A
 
−
|PPM
 
−
[[Donations Received|(donated by TITAN ROBOTICS)]]
 
−
|Down
 
−
| Under construction
 
−
|-
 
−
|[[File:Monoprice.jpg|200x200px|alt=|center|frameless]]
 
−
|'''Monoprice Mini 3D&nbsp;Printer'''
 
−
|Monoprice
 
−
|Mini E3D Edition
 
−
|<p style="text-align:right;">$75</p>
 
−
|N/A
 
−
|PPM
 
−
|Down
 
−
|Not plugged in.
 
−
Should work,
 
  
−
needs to be tested.
+
{{Member Benefits}}
−
SD card only.
 
  
−
PLA ONLY.
+
==Policies==
−
|-
+
'''Materials'''
−
|[[File:Formlabs Form 2.jpg|alt=Formlabs Form 2 resin printer|200x200px|center|frameless]]
+
{| class="wikitable"
−
|'''Form 2'''
+
|+Filament For Sale
−
'''resin printer'''
+
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important;; background-color:#ee9f21; color:#000000;"
−
|Form
+
| style="vertical-align:middle;" |'''Picture'''
−
|Form 2
+
|'''Filament'''
−
|<p style="text-align:right;">$2,500</p>
+
|'''Size/<br>Color'''
−
|Included
+
|'''Website'''
−
|PPM
+
|'''Sale Price'''
−
| Down
 
−
|Unable to get successful prints.
 
−
May need new resin or new bed.
 
−
|-
 
−
|
 
−
|'''RapMan 3'''  
 
−
'''3D Printer'''
 
−
|
 
−
|RapMan 3
 
−
|<p style="text-align:right;">$100</p>
 
−
|N/A
 
−
|PPM
 
−
|Down
 
−
|Needs board wired and power supply hooked up.
 
 
|-
 
|-
−
|'''Picture'''
+
|[[File:Filament CSL.jpg|alt=Filament CSL|center|frameless|222x222px]]
−
|'''Item'''
+
|'''Copolyester'''
−
|'''Manufacturer'''
 
−
|'''Model<br>Number'''
 
−
|'''Estimated<br>Value'''
 
−
|'''Manual'''
 
−
|'''Owner'''
 
−
|'''Status<br>Up/Down'''
 
−
|'''Problem<br>Description'''
 
−
|}
 
  
−
===Hand Tools===
 
−
:<span style="color:#FFFFFF; background:#EE9F21">&nbsp;3D Printing Area&nbsp;</span> hand tools should be marked with <span style="color:#EE9F21">'''orange'''</span> tape or paint.
 
−
:Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.
 
  
−
===[[Donations Received]]===
+
(1 kg spool,
−
===[[Wish List#3D Printing|Wish List]]===
 
  
−
==Policies==
+
Factory Sealed)
 +
|2.85mm
 +
White
 +
|[https://www.chromastrandlabs.com/ chromastrandslab.com]
 +
|'''$20'''
 +
|-
 +
|[[File:Filament IC3D.jpg|alt=Filament IC3D|center|frameless|222x222px]]
 +
|'''PETG'''
  
−
===[https://pikespeakmakerspace.org/reserve-equipment Equipment Reservations]===
 
−
===PPE===
 
−
:[http://bit.ly/ppmstuff '''Donate for PPE''']
 
−
:'''Or, leave donations in a black payment box, or use a QR code.'''
 
  
−
===Materials===
+
(1 kg spool,  
−
:'''Donate for "3D Print Filament":  [https://bit.ly/ppmstuff bit.ly/ppmstuff]'''
 
−
:Filament Cost $0.02<sup>9</sup> per Gram
 
−
:'''Or, leave donations in a black payment box, or use a QR code.'''
 
  
−
{{Member Benefits}}
+
Factory Sealed)
−
{{Scrap and Trash}}
+
|1.75mm
−
==Software==
+
Clear
 +
|[https://www.ic3dprinters.com ic3dprinters.com]
 +
|'''$20'''
 +
|-
 +
|[[File:Filament Village Plastics.jpg|alt=Filament Village Plastics|center|frameless|222x222px]]
 +
|'''PETG'''
  
−
===Modeling sw ===
 
−
:'''Fusion 360'''
 
  
−
=== Slicing sw===
+
(1 kg spool,
−
:'''PrusaSlicer 2.3.0'''
 
−
:[https://lychee.mango3d.io/ '''Lychee Slicer''']
 
−
:(free version) for ANYCUBIC resin printer.
 
  
−
=== Server sw===
+
Factory Sealed)
−
:[https://www.repetier-server.com/ '''Repetier-Server''']
+
| 1.75mm
−
:Go to our Slack channel to get login credentials.
+
Clear
 +
|[https://www.villageplastics.com/ villageplastics.com/]
 +
|'''$20'''
 +
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
 +
| style="vertical-align:middle;" |
 +
|
 +
|
 +
|
 +
|
 +
|}
 +
:'''Donate for "3D Print Filament" via PayPal:  [https://bit.ly/ppmstuff bit.ly/ppmstuff]'''
 +
:Filament Cost $0.02<sup>9</sup> per Gram
 +
:'''''Or, leave donations in a black payment box, or use a QR code.'''''
 +
'''PPE'''
 +
:[http://bit.ly/ppmstuff '''Donate for PPE''']
 +
:'''''Or, leave donations in a black payment box, or use a QR code.'''''
  
−
==Member Showcase==
+
{{Red Tags}}
  
−
===Photo Gallery===
+
==Modeling  and Slicing Software==
 +
'''Modeling software'''
 +
:'''[https://www.autodesk.com/products/fusion-360/overview Autodesk Fusion]''' — integrated, cloud-based CAD and CAM software
 +
:'''[https://www.blender.org/ Blender]''' — for creating 3D printed models (and much more)
 +
'''Slicing software'''
 +
:'''[https://help.prusa3d.com/en/category/prusaslicer_204 PrusaSlicer]''' — prepare ("slice") 3D models for 3D printing
  
−
<gallery>
+
==Member Showcase==
−
File:3D Printing Area 2021-11-24.jpg|alt=3D Printing Area 2021-11-24|<center>'''3D Printing Area<br>2021-11-24'''</center>
+
<gallery widths="200" heights="125">
−
File:Hello World.jpg|<center>'''Taz 5 Display'''</center>
+
File:Camera slider whole.jpg|alt=3D Printed camera slider|'''camera slider<br>by Trevor Banks'''
−
File:Camera slider whole.jpg|alt=3D Printed camera slider|<center>'''3D printed<br>camera slider<br>(by Trevor Banks)'''</center>
+
File:Camera slider.jpg|alt=3D Printed camera slider|'''camera slider closeup'''
−
File:Camera slider.jpg|<center>'''camera slider closeup'''</center>
+
File:Benchy from MMU.jpg|alt=colorful Benchy 3D print|'''colorful "Benchy"<br>using Prusa MMU'''
−
File:Lion 3D Printed.jpg|alt=3D Printed Lion|<center>'''3D Printed Lion<br>(PLA)'''</center>
+
File:Benchy.jpg|alt=Benchy 3D print|'''"Benchy" 3D Printing<br>benchmark test'''
−
File:Tesla Prusa.jpg|alt=3D printed Nikola Tesla|<center>'''Tesla bust<br>8 inch tall (PLA)'''</center>
+
File:Lion 3D Printed.jpg|alt=3D Printed Hairy Lion|'''Hairy Lion 3D Printing<br>test'''
−
File:Filament dryer box.jpg|alt=Filament dryer box|<center>'''Filament dryer box'''</center>
+
File:Tesla Prusa.jpg|alt=3D printed Nikola Tesla bust|'''Tesla bust<br>8 inch tall'''
−
File:Toilet paper holder.jpg|alt=Toilet paper holder|<center>'''Toilet paper holder'''</center>
+
File:Toilet paper holder.jpg|alt=Toilet paper holder|'''Stormtrooper<br>Toilet paper holder'''
−
File:HACKberry 3D printed hand.jpg|alt=exiii prosthetic/robotic hand|<center>'''Open-source<br>prosthetic/robotic hand<br>(Tima Anankitpaiboon)'''</center>
+
File:InMoov robot.jpg|alt=InMoov robot torso|'''Open-source<br>InMoov robot<br>by Kelly C.'''
−
File:InMoov robot.jpg|alt=InMoov robot|<center>'''InMoov robot<br>(by Kelly C.)'''</center>
+
File:HACKberry 3D printed hand.jpg|alt=exiii prosthetic/robotic hand|'''Open-source<br>prosthetic/robotic hand<br>Tima Anankitpaiboon'''
−
File:3D Printing at the SUMMIT.jpg|alt=3D Printing at the SUMMIT|<center>'''3D Printing at the SUMMIT'''</center>
+
File:HACKberry 3 hands.jpg|alt=HACKberry 3 hands|'''Open-source<br>prosthetic/robotic hands<br>Tima Anankitpaiboon'''
 +
File:3D Printing at the SUMMIT.jpg|alt=3D Printing at the SUMMIT|'''3D Printing record<br>at the<br>PIKES PEAK SUMMIT'''
 
</gallery>
 
</gallery>
 +
<br>
 +
{{Template:Showcase_blurb}}
  
−
===PPM YouTube Channel===
+
==Related Pages==
−
:'''[https://www.youtube.com/channel/UCeIsImKtiNm7D_BxfG4n7zg/featured "featured" videos],''' (the YouTube "HOME" tab)
+
Links to related PPM Wiki pages:
−
:[https://www.youtube.com/channel/UCeIsImKtiNm7D_BxfG4n7zg/playlists '''"Things we've built'''"], Created playlists, including 3D-printed robotic hand (2015)
+
:[[3D Printing -- Resin|<span style="color:#000000; background:#EE9F21">&nbsp;&nbsp;'''3D Printing — Resin (SLA)'''&nbsp;&nbsp;</span>]]
 +
:[[3D Scanning|<span style="color:#000000; background:#EE9F21">&nbsp;&nbsp;'''3D Scanning'''&nbsp;&nbsp;</span>]]
 +
:[[Computers|<span style="color:#000000; background:#D0DD27">&nbsp;&nbsp;'''Computers'''&nbsp;&nbsp;</span>]]
 +
:[[Raspberry Pi|<span style="color:#ffffff; background:#864199">&nbsp;&nbsp;'''Raspberry Pi'''&nbsp;&nbsp;</span>]]
  
−
==Other Fun Stuff==
+
:'''[[STL File Format Tips]]'''
−
"Wear you some gloves.",  '''https://shop.crafnation.com/product/wearyousomegloves'''
+
:'''[[PrusaSlicer Tips]]'''
 +
:'''[[Autodesk Fusion Tips]]'''
 +
:'''[[Blender Tips]]'''
 +
:'''[[QR Codes]]'''
  
−
===[[Lithophane Links]] ===
+
==Curated Links==
 +
Links to member-recommended external sites:
 +
:'''https://www.3dbenchy.com/''' — 3D torture test
 +
:'''https://www.etsy.com/market/lithophanes'''
 +
:'''https://www.thingiverse.com/search?q=lithophanes'''
 +
:'''[https://forum.prusa3d.com/forum/english-forum-awesome-prints-hall-of-fame/ Awesome prints (Hall Of Fame)]'''
 +
:[https://www.youtube.com/channel/UCeIsImKtiNm7D_BxfG4n7zg/playlists '''"Things we've built"'''], including 3D-printed robotic hand (2015)
 +
==For Additional Help==
 +
:Use the PPM Slack channel #3d-printing
 +
:[[How To Slack#PPM Channel Names and Descriptions|'''List of all PPM Slack channels''']]
 +
:Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the&nbsp;community.
 +
{{Template:Footer}}
 
<br>
 
<br>
−
<br>
+
<p style="padding:0.2em 0.4em; background:#EE9F21; color:#FFFFFF; font-size:15%;"> &nbsp; </p>
−
<hr>
+
 
−
{{Template:Footer}}
+
{{Template:Ideas into reality}}
 +
 
 +
[[Category:Volunteers Needed]]
 +
<!--Woodshop-->

Revision as of 20:20, 27 March 2024

Level 2 badge used at Pikes Peak Makerspace

The 3D Printing Area at Pikes Peak Makerspace (PPM) consists mostly of Level 2 equipment.

Additional PPM training is required to use any of our Level 2 equipment.

Additional PPM training and then certification is required to use any of our Level 3 equipment.

Our trainers are passionate about sharing their knowledge and ensuring a positive learning experience for all.

We are grateful for their commitment and dedication to our community.

3D Printing Area hand tools should be marked with orange tape or paint.

 


Safety First

Members must know the following information:

In case of emergency, call 911.
Our physical location is:
735 East Pikes Peak Avenue
Colorado Springs, CO 80903
use this when ordering pizza or an ambulance
  • Emergency sign

    IN CASE OF
    EMERGENCY
    sign

PPM Fire Escape Plan

Fire Escape Plan maps are posted throughout the Makerspace.
There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.
  • PPM Emergency Evacuation Plan 040721

    PPM Emergency
    Evacuation Plan.pdf

  • PPM Fire Prevention Plan 0407022

    PPM Fire
    Prevention Plan.pdf

  • PPM Fire Escape Plan

    PPM Fire Escape
    Plan

First Aid

There is a FIRST AID Supply Cabinet in our Kitchen Area.
FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.
  • FIRST AID Supply Cabinet

    FIRST AID
    Supply Cabinet

  • FIRST AID kit

    FIRST AID
    Kit

Eye Wash Stations

Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.
  • EMERGENCY EYE & FACE WASH STATION

    Emergency
    Eye & Face Wash
    Station

Personal Protective Equipment (PPE)

Wear protective equipment in all Wood and Metal Shop Areas.
Wear gloves when using Isopropyl Alcohol and other cleaners.
  • SAFETY GOGGLES

    Personal Protective Equipment (PPE)

Hazardous Chemicals

All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.
Review the Safety Data Sheet (SDS) information of unknown products before use.
SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.
Do not bring dangerous chemicals to the makerspace.
Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.
Please DO NOT paint indoors.
  • flammables cabinet

    Flammables Cabinet


 

Classes and Training

New Member Orientation

Instructor — Josh Rafail

Area Contact — Mathew Palfenier

To help out in the 3D Printing Area at PMM, use our #3d-printing channel on Slack.

Classes

PPM announces all its Upcoming events, including classes, on Meetup

Training

FDM vs SLA 3D Printing — according to the "new Bing"
"FDM and SLA are two different types of 3D printing technologies that use different materials and methods to create parts. FDM stands for fused deposition modeling, and SLA stands for stereolithography. Here are some of the main differences between them:
FDM uses a heated nozzle to extrude melted plastic filament one layer at a time on a build platform. SLA uses a UV laser to cure liquid resin one layer at a time in a resin tank.
FDM can print with a variety of thermoplastic materials, such as ABS, PLA, PETG, and nylon. SLA can print with different types of resin materials, such as standard, engineering, and dental resins.
FDM has more color options and similar strength in the X and Y directions than SLA. SLA has better surface finish, detail, and speed than FDM.
FDM is cheaper, more user-friendly, and more reliable than SLA. SLA is more expensive, requires more post-processing, and is more sensitive to environmental factors than FDM.
FDM is suitable for basic proof-of-concept models, quick and low-cost prototyping, and simple parts that might be machined. SLA is ideal for high-detail parts, molds, patterns, and functional parts that require tight tolerances and smooth surfaces."


Intro To 3D Printing — new class info from Josh Rafail
PRUSA KNOWLEDGE BASE
Prusa Material Table
Prusa 3D by Josef Prusa — YouTube channel
Ultimate 3D Printing Materials Guide — SIMPLYFY3D

Equipment Lists

3D Printers

Picture Item Manufacturer/
Model 		Build
Volume 		Upgrades
3D Printer

#1

Level 2 badge
 Prusa /

MK3S

250x210x200 mm (stock)
Prusa 2.jpg
 3D Printer

#2

Level 2 badge
 Prusa /

MK3S

250x210x200 mm (stock)
Prusa 3D printer
 3D Printer

#3

Level 2 badge
 Prusa /

MK3S

  • E3D Revo Hotend
  • 2 Fan Upgrade
  • Quick fit nozzle
  • Obsidian nozzle
  • Bed w/ PEI coating
3D Printer

(MEDUSA)

Level 3 badge

Prusa /

MK3S

  • E3D Revo Hotend
  • 2 fan upgrade
  • Quick fit nozzle
  • Brass nozzle
  • Bed w/ PEI coating

3D Printing Equipment — Level 1

Picture Item Manufacturer/
Model 		Reference
Materials
3Doodler create
 3Doodler create 3Doodler

STAR TREK

Getting Started
Dryer oven
 lab oven / dryer

with timer

(12"x12"x12" interior)

Curtin Matheson
IMPULSE SEALER new
 IMPULSE HEAT SEALER

12" w cutter

Midwest Pacific,

MP-12C

filament dryer box
 filament dryer box PPM
Fume Extractor
 Fume Extractor PACE

8888-0825

  • IMPULSE HEAT SEALER label

    IMPULSE SEALER label

3D Printing — Computers  

Item Application
Software 		Manufacturer/
Model 		CPU Memory/
Storage 		System
Software
laptop computer PrusaSlicer

Lychee Slicer

Repetier‑Server

Dell Microsoft Windows 10

Hand Tools

  • INFRARED THERMOMETER

    INFRARED THERMOMETER

3D Printing Area hand tools should be marked with orange tape or paint.
Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Donations Received

Wish List

Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make.

Benefits

PPM members enjoy discounts at the following local merchants:
(walk in, show proof of membership)
Company Website Benefit Directions to
Logo WOODCRAFT
 Woodcraft of Colorado Springs 10% discount    4438 Austin Bluffs Parkway
Logo CO Lumber
 CO Lumber Specialties 10% discount 3636 Stone Avenue
Logo General Air
 GENERAL AIR 10% discount 3031 N Nevada Ave.
Logo ACE
 ACE Hardware Uintah Gardens 10% discount 1830 W Uintah Street
Map of stores that provide PPM member discounts
Map of helpful local resources curated by our makers
At home LightBurn subscriptions can be purchased at a discounted rate for being a PPM member.
The discount code is saved as a Pinned Message in our 'laser-cutter' channel in Slack.

Policies

Materials

Filament For Sale
Picture Filament Size/
Color 		Website Sale Price
Filament CSL
 Copolyester


(1 kg spool,

Factory Sealed)

2.85mm

White

chromastrandslab.com $20
Filament IC3D
 PETG


(1 kg spool,

Factory Sealed)

1.75mm

Clear

ic3dprinters.com $20
Filament Village Plastics
 PETG


(1 kg spool,

Factory Sealed)

1.75mm

Clear

villageplastics.com/ $20
Donate for "3D Print Filament" via PayPal: bit.ly/ppmstuff
Filament Cost $0.029 per Gram
Or, leave donations in a black payment box, or use a QR code.

PPE

Donate for PPE
Or, leave donations in a black payment box, or use a QR code.

Red Tags

If equipment needs repairs, place a Red Tag on it and report it via the Pikes Peak Makerspace Slack channel #red-tags-issues
This advises others on the malfunctioning equipment and ensures that actions can be taken to service/repair the equipment promptly.
For more information, review our New Member Orientation wiki page.

Modeling and Slicing Software

Modeling software

Autodesk Fusion — integrated, cloud-based CAD and CAM software
Blender — for creating 3D printed models (and much more)

Slicing software

PrusaSlicer — prepare ("slice") 3D models for 3D printing

Member Showcase

  • 3D Printed camera slider

    camera slider
    by Trevor Banks

  • 3D Printed camera slider

    camera slider closeup

  • colorful Benchy 3D print

    colorful "Benchy"
    using Prusa MMU

  • Benchy 3D print

    "Benchy" 3D Printing
    benchmark test

  • 3D Printed Hairy Lion

    Hairy Lion 3D Printing
    test

  • 3D printed Nikola Tesla bust

    Tesla bust
    8 inch tall

  • Toilet paper holder

    Stormtrooper
    Toilet paper holder

  • InMoov robot torso

    Open-source
    InMoov robot
    by Kelly C.

  • exiii prosthetic/robotic hand

    Open-source
    prosthetic/robotic hand
    Tima Anankitpaiboon

  • HACKberry 3 hands

    Open-source
    prosthetic/robotic hands
    Tima Anankitpaiboon

  • 3D Printing at the SUMMIT

    3D Printing record
    at the
    PIKES PEAK SUMMIT


For even more member projects, visit our #showcase channel on Slack, or follow our social media links.

Related Pages

Links to related PPM Wiki pages:

  3D Printing — Resin (SLA)  
  3D Scanning  
  Computers  
  Raspberry Pi  
STL File Format Tips
PrusaSlicer Tips
Autodesk Fusion Tips
Blender Tips
QR Codes

Curated Links

Links to member-recommended external sites:

https://www.3dbenchy.com/ — 3D torture test
https://www.etsy.com/market/lithophanes
https://www.thingiverse.com/search?q=lithophanes
Awesome prints (Hall Of Fame)
"Things we've built", including 3D-printed robotic hand (2015)

For Additional Help

Use the PPM Slack channel #3d-printing
List of all PPM Slack channels
Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the community.
PPM Tool Color Map — Interactive
Search the PPM Wiki — include both Content pages and Multimedia
Contact Us if you cannot find your answer here on our Wiki, or you notice something is outdated.


 


Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative processes by providing shared space, shared tools, materials, software and a knowledge base to turn their ideas into reality.

Retrieved from "https://wiki.pikespeakmakerspace.org/index.php?title=3D_Printing&oldid=14579"