Area Captain Duties
3D Printing
| Maintenance and consumables | Week 1 | Week 2 | Week 3 | Week 4 |
|---|---|---|---|---|
| check all printers are working properly | ||||
| calibrate first layer | ||||
| z rod calibration | ||||
| bed leveling | ||||
| lube bearings | ||||
| check print bed condition | ||||
| make sure server is working properly | ||||
| clean out models on server | ||||
| clean out scrap trays | ||||
| check and fill isopropyl bottles | ||||
| check filament inventory | ||||
| check resin inventory | ||||
| check all bolts are tight |
Jump to 3D Printing page
CNC
| Maintenance and consumables | Week 1 | Week 2 | Week 3 | Week 4 |
|---|---|---|---|---|
| check and empty dust collection bin | ||||
| empty trash can | ||||
| check y axis is square | ||||
| check z axis is square | ||||
| grease bearings | ||||
| grease z ball screw | ||||
| blowout dust from electronics | ||||
| resurface spoilboard | ||||
| check/ restock tape | ||||
| check/ restock / order CA glue and activator | ||||
| check all bolts are tight | ||||
| check/ flush VFD water (every 6 months) | ||||
| bolt check |
Jump to CNC page
Computers
| Maintenance and consumables | Week 1 | Week 2 | Week 3 | Week 4 |
|---|---|---|---|---|
| update application software | ||||
| update system software | ||||
| blow dust out of computers |
Jump to Computers page
Printers
| Maintenance and consumables | Week 1 | Week 2 | Week 3 | Week 4 |
|---|---|---|---|---|
| check print quality | ||||
| check printer ink levels | ||||
| check printer toner levels | ||||
| check consumables (ink, toner, paper) |
Jump to Printers page
Laser
| Maintenance and consumables | Week 1 | Week 2 | Week 3 | Week 4 |
|---|---|---|---|---|
| Zing clean out tray | ||||
| Zing clean optics | ||||
| Zing check/ tighten belts | ||||
| Zing check/ restock wood | ||||
| Zing clean bed |
Jump to Laser page
Laser — BOSS
| Maintenance and consumables | Week 1 | Week 2 | Week 3 | Week 4 |
|---|---|---|---|---|
| Boss clean mirrors | ||||
| Boss clean linear rails | ||||
| Boss change water in chiller | ||||
| Boss clean lens | ||||
| Boss clean gantry and worm rods | ||||
| Boss check belts | ||||
| Boss check bolts | ||||
| Boss clean tray | ||||
| Boss clean honeycomb | ||||
| Boss clean knives | ||||
| Boss clean glass |
Jump to Laser — BOSS page
Metal Shop
| Maintenance and consumables | Week 1 | Week 2 | Week 3 | Week 4 |
|---|---|---|---|---|
| check bandsaw blades | ||||
| check chopsaw blades | ||||
| check grinding wheels | ||||
| check for broken tools | ||||
| clean out trash cans |
Jump to Metal Shop page
Metal Shop — Welding Area
| Maintenance and consumables | Week 1 | Week 2 | Week 3 | Week 4 |
|---|---|---|---|---|
| check welder gas, wire, and tips | ||||
| check oxy acetylene gas | ||||
| check for broken tools | ||||
| clean out trash cans |
Jump to Metal Shop — Welding Area page
Wood Shop
| Maintenance and consumables | Week 1 | Week 2 | Week 3 | Week 4 |
|---|---|---|---|---|
| check and empty dust collection bins | ||||
| empty trash cans | ||||
| check/ clean saw blades | ||||
| check/ square table saw fence | ||||
| check dust collection for clogs | ||||
| check/ clean dust collection filters | ||||
| check/ empty dust collection bags | ||||
| check/ restock // order sandpaper | ||||
| check/ restock // order sand wood glue | ||||
| check for broken tools | ||||
| check planer is square | ||||
| check jointer is square | ||||
| check belt sander belts | ||||
| check miter saw is square | ||||
| check/ empty festool vacuum bag | ||||
| check planer blades | ||||
| check jointer blades |
Jump to Wood Shop page
Wood Shop — SawStop
| Maintenance and consumables | Week 1 | Week 2 | Week 3 | Week 4 |
|---|---|---|---|---|
| check and empty dust from cabinet | ||||
| check/ clean saw blades | ||||
| check/ square table saw fence | ||||
| check dust collection for clogs | ||||
| check/ clean dust collection filters | ||||
| check/ empty dust collection bags | ||||
| check for broken tools | ||||
| empty trash cans |
Jump to Wood Shop — SawStop page
For Additional Help
Search the PPM Wiki — include Content pages as well as Multimedia.
Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.
Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative processes by providing shared space, shared tools, materials, software, and a knowledge base to turn their ideas into reality.