Area Captain Duties

From Pikes Peak Makerspace Wiki
Jump to navigation Jump to search

3D Printing

Maintenance and consumables Week 1 Week 2 Week 3 Week 4
check all printers are working properly
calibrate first layer
z rod calibration
bed leveling
lube bearings
check print bed condition
make sure server is working properly
clean out models on server
clean out scrap trays
check and fill isopropyl bottles
check filament inventory
check resin inventory
check all bolts are tight

Jump to   3D Printing   page

CNC

Maintenance and consumables Week 1 Week 2 Week 3 Week 4
check and empty dust collection bin
empty trash can
check y axis is square
check z axis is square
grease bearings
grease z ball screw
blowout dust from electronics
resurface spoilboard
check/ restock tape
check/ restock / order CA glue and activator
check all bolts are tight
check/ flush VFD water (every 6 months)
bolt check

Jump to   CNC   page

Computers

Maintenance and consumables Week 1 Week 2 Week 3 Week 4
update application software
update system software
blow dust out of computers

Jump to   Computers   page

Printers

Maintenance and consumables Week 1 Week 2 Week 3 Week 4
check print quality
check printer ink levels
check printer toner levels
check consumables (ink, toner, paper)

Jump to   Printers   page

Laser

Maintenance and consumables Week 1 Week 2 Week 3 Week 4
Zing clean out tray
Zing clean optics
Zing check/ tighten belts
Zing check/ restock wood
Zing clean bed

Jump to   Laser   page

Laser — BOSS

Maintenance and consumables Week 1 Week 2 Week 3 Week 4
Boss clean mirrors
Boss clean linear rails
Boss change water in chiller
Boss clean lens
Boss clean gantry and worm rods
Boss check belts
Boss check bolts
Boss clean tray
Boss clean honeycomb
Boss clean knives
Boss clean glass

Jump to   Laser — BOSS   page

Metal Shop

Maintenance and consumables Week 1 Week 2 Week 3 Week 4
check bandsaw blades
check chopsaw blades
check grinding wheels
check for broken tools
clean out trash cans

Jump to   Metal Shop   page

Metal Shop — Welding Area

Maintenance and consumables Week 1 Week 2 Week 3 Week 4
check welder gas, wire, and tips
check oxy acetylene gas
check for broken tools
clean out trash cans

Jump to   Metal Shop — Welding Area   page

Wood Shop

Maintenance and consumables Week 1 Week 2 Week 3 Week 4
check and empty dust collection bins
empty trash cans
check/ clean saw blades
check/ square table saw fence
check dust collection for clogs
check/ clean dust collection filters
check/ empty dust collection bags
check/ restock // order sandpaper
check/ restock // order sand wood glue
check for broken tools
check planer is square
check jointer is square
check belt sander belts
check miter saw is square
check/ empty festool vacuum bag
check planer blades
check jointer blades

Jump to   Wood Shop   page

Wood Shop — SawStop

Maintenance and consumables Week 1 Week 2 Week 3 Week 4
check and empty dust from cabinet
check/ clean saw blades
check/ square table saw fence
check dust collection for clogs
check/ clean dust collection filters
check/ empty dust collection bags
check for broken tools
empty trash cans

Jump to   Wood Shop — SawStop   page


For Additional Help

Search the PPM Wiki — include Content pages as well as Multimedia.

Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.

Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative processes by providing shared space, shared tools, materials, software, and a knowledge base to turn their ideas into reality.