Difference between revisions of "Metal Shop"

Revision as of 00:33, 26 January 2023

The Metal Shop Area at Pikes Peak Makerspace (PPM) consists mostly of Level 3 equipment.

Additional training and certification is required to use any of our Level 3 equipment.

Metal Shop Area hand tools should be marked with pink tape or paint or powder coating.

Metal Shop Area (03/15/22)

Safety First

Members must know the following information:

In case of emergency, call 911.

Our physical location is:

735 East Pikes Peak Avenue

Colorado Springs, CO 80903

use this when ordering pizza or an ambulance

IN CASE OF
EMERGENCY
sign

PPM Fire Escape Plan

Fire Escape Plan maps are posted throughout the Makerspace.

There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.

PPM Emergency
Evacuation Plan.pdf
PPM Fire
Prevention Plan.pdf
PPM Fire Escape
Plan

First Aid

There is a FIRST AID Supply Cabinet in our Kitchen Area.

FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.

FIRST AID
Supply Cabinet
FIRST AID
Kit

Eye Wash Stations

Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.

Emergency
Eye & Face Wash
Station

Personal Protective Equipment (PPE)

Wear protective equipment in all Wood and Metal Shop Areas.

Wear gloves when using Isopropyl Alcohol and other cleaners.

Personal Protective Equipment (PPE)

Hazardous Chemicals

All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.

Review the Safety Data Sheet (SDS) information of unknown products before use.

SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.

Do not bring dangerous chemicals to the makerspace.

Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.

Please DO NOT paint indoors.

Flammables Cabinet
in the Vented Room

Impairment

The use of PPM equipment requires you to be alert, attentive, and focused.

Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.

Classes and Training

New Member Orientation

Area Captain -- Trevor Banks

View all PPM Area Captains

Area Captain Duties

To help out in the Metal Shop, contact the Area Captain on Slack.

Classes

Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup

Training

Evolution Power Tools -- on YouTube

Tips

Before using air tools add 1 drop of air tool oil

For Additional Help

Use the PPM Slack channel #metal-shop

Equipment Lists

Metal Shop Equipment

Picture	Item	Manufacturer	Model Number	Estimated Value	Manual	Owner	Status
	drill press	ROCKWELL	DG08	$500	no	PPM (donated by Qualtek Manufacturing)
	metal band saw	DoALL	M602	$500	no	PPM (donated by Qualtek Manufacturing)	Working
	evolution Metal Cutting Chop Saw 14" blade	evolution POWER TOOLS	evoSAW	?	yes	PPM	FULLY FUNCTIONING
	5 in. Bench Grinder on stand	CRAFTSMAN		?		PPM
	6 in. Bench Grinder on stand	CRAFTSMAN		?		PPM	2 new grinding wheels, (12/13/21)
	30" BENDING BRAKE	CENTRAL MACHINERY	61791	$70	Owner's Manual	PPM (donated by Josh Harlow)	working
	vacuum former	PLAST-O-CRAFT		?		?	working (12/10/22)
	TOOL PRESS 1/2 TON	JANESVILLE	ILP-500	$386	ON LINE	PPM	FULLY FUNCTIONING
	METAL BAND SAW (horizontal)	WELLS	Wellsaw 58B	?	Review	?	?
	parts washer with pump (20 gallon)	CENTRAL MACHINERY	60769	$128	Owner's Manual	PPM (donated by Qualtek Manufacturing)	not yet installed (02/21/22)
Picture	Item	Manufacturer	Model Number	Estimated Value	Manual	Owner	Status

DOALL band saw
Saw Length
DG08 Rockwell
drill press nameplate
Parts washer label.jpg

Parts washer
label

Lathe Equipment

Picture	Item	Manufacturer	Model Number	Estimated Value	Manual	Owner
	combination machine (Mill)		Grizzly G0516	?	online	Bill Epperson
	combination machine (Lathe)		Grizzly G0516	?	online	Bill Epperson
	tool cabinet	U.S. General		?		Bill Epperson
Picture	Item	Manufacturer	Model Number	Estimated Value	Manual	Owner

Grizzly G0516 Mill/Drill/Lathe
WARNING

Hand Tools

Picture	Item	Manufacturer	Model Number	Estimated Value	Owner
	vise grips				PPM
	Drill Bit Set, 29 pieces, Titanium	Milwaukee	48-89-4632	$129	PPM
	Punch Set in plastic case	Wheeler	link	$30	PPM
Picture	Item	Manufacturer	Model Number	Estimated Value	Owner

Metal Shop Area hand tools should be marked with pink tape or paint or powder coating.

Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Donations Received

Wish List

Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make.

Benefits and Policies

PPM members enjoy discounts at the following local merchants:

(bring proof of membership)


Company	Website	Benefit	Directions to
	Woodcraft of Colorado Springs	10% discount	4438 Austin Bluffs Parkway
	CO Lumber Specialties	10% discount	3636 Stone Avenue
	GENERAL AIR	10% discount	3031 N Nevada Ave.
	ACE Hardware Uintah Gardens	10% discount	1830 W Uintah Street

Map of stores that provide PPM member discounts

Map of helpful local resources curated by our makers

At home LightBurn subscriptions can be purchased at a discounted rate for being a PPM member.

The discount code is saved as a Pinned Message in our 'laser-cutter' channel in Slack.

Equipment Reservations

Materials

Donate for "General Supplies" via PayPal: bit.ly/ppmstuff

Or, leave donations in a black payment box, or use a QR code.

Red Tags

Use a Red Tag, which can be found in the red tag area, to designate broken equipment.

Scrap and Trash

Trash day is MONDAY

Recycling day is MONDAY (96 gallon tote)

Single Stream Recycling provided by Waste Connections. Paper, cardboard, cans, glass, and one time use plastics.

Empty recycling and trash into our dumpster at the back (south side) of the building.

Always leave the space better than you found it.

Software

Links to other PPM Wiki pages (internal links):

Fusion 360

Curated Links

Links to other sites (external links):

Jamie Hyneman On Welding in His Workshop

Other Fun Stuff