Difference between revisions of "3D Printing"

From Pikes Peak Makerspace Wiki
Jump to navigation Jump to search
 
(253 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
[[File:Level_2_badge.png|alt=Level 2 badge|left|frameless|100x100px]]
+
[[File:Level 2 badge.png|alt=Level 2 badge used at Pikes Peak Makerspace|left|frameless|100x100px|PPM TRAINING REQUIRED]]
  
 
'''The 3D Printing Area at Pikes Peak Makerspace (PPM) consists mostly of Level 2 equipment.'''
 
'''The 3D Printing Area at Pikes Peak Makerspace (PPM) consists mostly of Level 2 equipment.'''
  
−
Additional training is required to use our Level 2 equipment.
+
Additional PPM training is required to use any of our Level 2 equipment.
 +
 
 +
Additional PPM training and then PPM certification is required to use any of our Level 3 equipment.
 +
 
 +
Our trainers are passionate about sharing their knowledge and ensuring a positive learning experience for all.
 +
 
 +
We are grateful for their commitment and dedication to our community.
 +
 
 +
No reservations are required for any of our 3D Printers at this time, they are "first-come, first-served".
 +
 
 +
'''3D Printing Area''' hand tools should be marked with <span style="color:#EE9F21">'''orange'''</span> tape or paint.
 
<br>
 
<br>
 
<br>
 
<br>
−
<span style="color:#FFFFFF; background:#EE9F21">&nbsp;3D Printing Area&nbsp;</span> [[3D Printing#Hand Tools|hand tools]] should be marked with <span style="color:#EE9F21">'''orange'''</span> tape or paint.
+
{{Template:Contact Us}}
 +
 
 +
<p style="padding:0.2em 0.4em; background:#EE9F21; color:#FFFFFF; font-size:15%;"> &nbsp; </p>
 
<br>
 
<br>
 +
{{Template:Safety}}
 
<br>
 
<br>
−
[[File:3D Printing Area2.jpg|alt=3D Printing Area|thumb|300x300px|<span style="color:#FFFFFF; background:#EE9F21">&nbsp;3D Printing Area&nbsp;&nbsp;(03/13/22)&nbsp;<br><br>]]
+
<br>
 +
<p style="padding:0.2em 0.4em; background:#EE9F21; color:#FFFFFF; font-size:15%;"> &nbsp; </p>
  
−
{{Template:Safety}}
+
== Classes ==
 +
:PPM announces its [https://www.meetup.com/pikespeakmakerspace/events '''Upcoming events, including classes, on Meetup''']
 +
:To help out in the 3D Printing Area at PMM, use our #3d-printing channel on Slack.
 +
==Training ==
 +
:'''FDM vs SLA 3D Printing — according to the "new Bing"'''
  
−
==Classes and Training==
+
::''"FDM and SLA are two different types of 3D printing technologies that use different materials and methods to create parts. FDM stands for fused deposition modeling, and SLA stands for stereolithography. Here are some of the main differences between them:''
−
===[[New Member Orientation]]===
 
  
−
===Area Captain -- Trevor Banks===
+
::''FDM uses a heated nozzle to extrude melted plastic filament one layer at a time on a build platform. SLA uses a UV laser to cure liquid resin one layer at a time in a resin tank.''
−
:'''Additional 3D Printer Captains wanted'''
 
−
:[[Area Captain Duties#3D Printing|'''Area Captain Duties''']]
 
  
−
:To help out in the 3D Printing Area, contact the Area Captain on Slack.
+
::''FDM can print with a variety of thermoplastic materials, such as ABS, PLA, PETG, and nylon. SLA can print with different types of resin materials, such as standard, engineering, and dental resins.''
 +
::''FDM has more color options and similar strength in the X and Y directions than SLA. SLA has better surface finish, detail, and speed than FDM.''
 +
::''FDM is cheaper, more user-friendly, and more reliable than SLA. SLA is more expensive, requires more post-processing, and is more sensitive to environmental factors than FDM.''
 +
::''FDM is suitable for basic proof-of-concept models, quick and low-cost prototyping, and simple parts that might be machined. SLA is ideal for high-detail parts, molds, patterns, and functional parts that require tight tolerances and smooth surfaces."''
 +
<br>
 +
:'''[https://docs.google.com/document/d/19Kd1ZjBzIkBxqTE1KEoXh08TGZZaiooPNXcRInKPV5E/edit?usp=drivesdk Intro To 3D Printing] — new class information from Josh&nbsp;Rafail'''
  
−
===Classes===
+
:'''[https://help.prusa3d.com/ PRUSA KNOWLEDGE BASE]'''
−
:Pikes Peak Makerspace announces its  [https://www.meetup.com/pikespeakmakerspace/events '''Upcoming events, including classes, on Meetup''']
+
:'''[https://help.prusa3d.com/materials Prusa Material Table]'''
 +
:'''[https://www.youtube.com/channel/UCLHAxAdvAKJY0niRJZRYMvg Prusa 3D by Josef Prusa]''' — YouTube channel
 +
:'''[https://www.simplify3d.com/support/materials-guide/#all Ultimate 3D Printing Materials Guide]''' — SIMPLYFY3D
 +
:'''[https://www.3dsourced.com/rigid-ink/ultimate-3d-printing-troubleshooting-guide/ 44 Common 3D Print Problems]''' — on 3dsourced.com
 +
:'''[https://reprap.org/wiki/Glossary RepRap Glossary]''' —  common terms and abbreviations
 +
<br>
 +
:{{Template:Historical}}
 +
:'''[[Introduction to 3D Printing]]'''
  
−
===Training===
+
==Equipment Lists==
  
−
:'''[[Introduction to 3D Printing]] -- class info'''
+
===3D Printers===
−
:
+
{| class="wikitable"
−
:'''[[Intro to SLA 3D Printing]] -- class info'''
+
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#ee9f21; color:#000000;"
−
::Be sure to log your SLA printing job using the new Printer Usage Form.
+
|Item
−
::Clear the resin trays of the SLA printers carefully and completely to avoid cross-contamination.
+
|Manufacturer/<br>Model
−
 
+
|Build<br>Volume
−
===Events===
 
−
<gallery>
 
−
File:3D Printing Area 2021-11-24.jpg|alt=3D Printing Area 2021-11-24|<center>3D Printing Area<br>(2021-11-24)</center>
 
−
File:3D Printing at the SUMMIT.jpg|alt=3D Printing at the SUMMIT|<center>3D Printing at the<br>PIKES PEAK SUMMIT</center>
 
−
</gallery>
 
−
 
 
−
===For Additional Help===
 
−
Use the PPM Slack channel:
 
−
:<nowiki>#3d-printing</nowiki>
 
−
 
 
−
== Equipment Lists ==
 
−
 
 
−
===3D Printing Equipment -- Level 2===
 
−
{| class="wikitable sortable"
 
−
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#ee9f21; color:#ffffff;"
 
−
| style="vertical-align:middle;" |'''Picture'''
 
−
|'''Item'''
 
−
|'''Manufacturer'''
 
−
|'''Model<br>Number'''
 
−
|Print<br>Volume
 
 
|Upgrades
 
|Upgrades
−
|'''Manual'''
+
|Resources
−
|'''Estimated<br>Value'''
 
−
|'''Owner'''
 
 
|-
 
|-
−
|[[File:3D printer MEDUSA.jpg|alt=3D printer MEDUSA|center|frameless|200x200px]]
+
|'''3D Printer&nbsp;#1'''  
−
|'''3D Printer'''  
 
−
'''(MEDUSA)'''<br>
 
−
[[File:Level_2_badge.png|left|frameless|55x55px]]
 
−
|[https://www.prusa3d.com/ PRUSA RESEARCH]
 
−
|Prusa MK3
 
−
| 9.8 x 8.3 in,
 
  
−
8 in tall
+
[[File:Level_2_badge.png|alt=Level 2 badge|left|frameless|55x55px]]
−
|Multi
+
|Prusa /
−
Material
+
MK3S
 +
|250x210x200 mm
 +
|(stock)
 +
|
 +
|-
 +
|'''3D Printer&nbsp;#2'''
  
−
Unit
+
[[File:Level_2_badge.png|alt=Level 2 badge|left|frameless|55x55px]]
 +
|Prusa /
 +
MK3S
 +
|250x210x200 mm
 +
|(stock)
 +
|
 +
|-
 +
|'''3D Printer&nbsp;#3'''
  
−
(5 filaments)
+
[[File:Level_2_badge.png|alt=Level 2 badge|left|frameless|55x55px]]
−
|Included
+
|Prusa /
−
|<p style="text-align:right;">$1,000</p><p style="text-align:right;">(kit)</p>
+
MK3S
−
|PPM
+
|
 +
|E3D Revo Hotend<br>
 +
2 Fan Upgrade<br>
 +
Quick fit nozzle<br>
 +
Obsidian nozzle<br>
 +
Bed w/ PEI coating
 +
|[https://e3d-online.com/collections/prusa-upgrades Prusa Upgrades - E3D]
 
|-
 
|-
−
|[[File:3D printer HAYWIRE.jpg|center|frameless|200x200px]]
+
|'''3D Printer&nbsp;(MEDUSA)'''
−
|'''3D Printer'''
 
−
'''(HAYWIRE)'''<br>
 
−
[[File:Level_2_badge.png|left|frameless|55x55px]]
 
−
|[https://www.prusa3d.com/ PRUSA RESEARCH]
 
−
|Prusa MK2.5S
 
−
| 9.8 x 8.3 in,
 
  
−
8 in tall
+
[[File:Level_3_badge.png|alt=Level 3 badge|frameless|55x55px]]
 +
|Prusa /
 +
MK3S
 +
|
 +
|E3D Revo Hotend<br>
 +
2 fan upgrade<br>
 +
Quick fit nozzle<br>
 +
Brass nozzle<br>
 +
Bed w/ PEI coating
 +
|[https://e3d-online.com/collections/prusa-upgrades Prusa Upgrades - E3D]
 +
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
 
|
 
|
−
|Included
 
−
|<p style="text-align:right;">$350</p>
 
−
|PPM
 
−
|-
 
−
|[[File:Ender 3 Printer.jpg|center|frameless|200x200px]]
 
−
|'''3D Printer'''
 
−
<br>
 
−
[[File:Level_2_badge.png|left|frameless|55x55px]]
 
−
|Creality 3D
 
−
|Ender-3 Pro
 
 
|
 
|
 
|
 
|
−
|no
 
−
|<p style="text-align:right;">$400</p><p style="text-align:right;">(including upgrades)</p>
 
−
| PPM
 
−
(donated 04/22/22)
 
−
|-
 
−
|[[File:Monoprice.jpg|200x200px|alt=Monoprice 3D printer|center|frameless]]
 
−
|'''3D&nbsp;Printer'''<br>
 
−
[[File:Level_2_badge.png|left|frameless|55x55px]]
 
−
|Monoprice
 
−
|Mini E3D Edition
 
−
|4.7x4.7x4.7"
 
−
|SD card only.
 
−
PLA ONLY.
 
 
|
 
|
−
|<p style="text-align:right;">$75</p>
 
−
|PPM
 
−
|-
 
−
|[[File:MR T.jpg|alt=MR T 3D printer|center|frameless|200x200px]]
 
−
|'''3D Printer'''
 
−
'''(MR. T)'''<br>
 
−
[[File:Level_2_badge.png|left|frameless|55x55px]]
 
−
|[https://www.lulzbot.com/ LULZBOT]
 
−
| Taz 5
 
−
|11x11x8in
 
−
|(does not have
 
−
auto bed leveling)
 
−
|Included
 
−
|<p style="text-align:right;">$1,200</p>
 
−
|PPM
 
−
|-
 
−
|[[File:TIZZY.jpg|alt=TIZZY 3D Printer|center|frameless|200x200px]]
 
−
|'''3D Printer'''
 
−
'''(TIZZY)'''<br>
 
−
[[File:Level_2_badge.png|left|frameless|55x55px]]
 
−
|[https://www.lulzbot.com/ LULZBOT]
 
−
| Taz 5,
 
−
KITTAZ
 
−
|11x11x8in
 
−
|Auto bed leveling
 
−
|Included
 
−
|<p style="text-align:right;">$1,200</p>
 
−
|PPM
 
−
|-
 
−
|[[File:ANYCUBIC_3D_Printer.jpg|alt=ANYCUBIC 3D Printer|center|frameless|200x200px]]
 
−
|'''Resin Printer'''<br>
 
−
[[File:Level_2_badge.png|left|frameless|55x55px]]
 
−
|[https://www.anycubic.com/ Anycubic]
 
−
|PHOTON MONO 2K
 
−
| 163 x 102 x 180 mm tall
 
−
|magnetic bed
 
 
|
 
|
−
|<p style="text-align:right;">$200</p>
+
|}
−
|PPM
+
 
 +
===3D Printing Equipment — Level 1===
 +
{| class="wikitable"
 +
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important;; background-color:#ee9f21; color:#000000;"
 +
| style="vertical-align:middle;" |Picture
 +
|Item
 +
|Manufacturer/<br>Model
 +
|Resources
 
|-
 
|-
−
|<center>'''Picture'''</center>
+
|[[File:3Doodler create.jpg|alt=3Doodler create|133x133px|center|frameless]]
−
|<center>'''Item'''</center>
+
|'''3Doodler create'''
−
|<center>'''Manufacturer'''</center>
+
|3Doodler
−
|<center>'''Model<br>Number'''</center>
 
−
|<center>'''Print<br>Volume'''</center>
 
−
|<center>'''Upgrades'''</center>
 
−
|<center>'''Manual'''</center>
 
−
|<center>'''Estimated<br>Value'''</center>
 
−
|<center>'''Owner'''</center>
 
−
|}
 
  
−
===3D Printing Equipment -- Other===
+
STAR TREK
−
{| class="wikitable sortable"
+
|'''[https://learn.the3doodler.com/getting-started/ Getting Started]'''
−
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#ee9f21; color:#ffffff;"
 
−
| style="vertical-align:middle;" |'''Picture'''
 
−
|'''Item'''
 
−
|'''Manufacturer'''
 
−
|'''Estimated<br>Value'''
 
−
|'''Owner'''
 
 
|-
 
|-
 
|[[File:Dryer oven.jpg|alt=Dryer oven|200x200px|center|frameless]]
 
|[[File:Dryer oven.jpg|alt=Dryer oven|200x200px|center|frameless]]
Line 177: Line 133:
 
'''with timer'''
 
'''with timer'''
  
−
(12x12x12 interior)<br>
+
(12"x12"x12" interior)
−
[[File:Level_1_badge.png|left|frameless|55x55px]]
 
 
|Curtin Matheson
 
|Curtin Matheson
−
|<p style="text-align:right;">?</p>
+
|
−
|PPM
 
 
|-
 
|-
 
|[[File:IMPULSE SEALER new.jpg|alt=IMPULSE SEALER new|center|frameless|120x120px|link=https://wiki.pikespeakmakerspace.org/index.php/File:IMPULSE_SEALER_new.jpg]]
 
|[[File:IMPULSE SEALER new.jpg|alt=IMPULSE SEALER new|center|frameless|120x120px|link=https://wiki.pikespeakmakerspace.org/index.php/File:IMPULSE_SEALER_new.jpg]]
Line 188: Line 142:
 
|Midwest Pacific,  
 
|Midwest Pacific,  
 
MP-12C
 
MP-12C
−
|<p style="text-align:right;">$150</p>
+
|
−
|PPM
 
 
|-
 
|-
 
|[[File:Filament dryer box.jpg|alt=filament dryer box|200x200px|center|frameless]]
 
|[[File:Filament dryer box.jpg|alt=filament dryer box|200x200px|center|frameless]]
 
|'''filament dryer box'''
 
|'''filament dryer box'''
 
|PPM
 
|PPM
−
|<p style="text-align:right;">?</p>
+
|
−
|PPM
 
−
|-
 
−
|[[File:3Doodler create.jpg|alt=3Doodler create|133x133px|center|frameless]]
 
−
|'''3Doodler create'''
 
−
|3Doodler
 
−
 
 
−
STAR TREK
 
−
|<p style="text-align:right;">$80</p>
 
−
|PPM
 
−
|-
 
−
|[[File:UV Curing Box.jpg|alt=UV Curing Box|200x200px|center|frameless]]
 
−
|'''UV curing box'''
 
−
(6x6x10 inches)
 
−
|PPM
 
−
|<p style="text-align:right;">?</p>
 
−
|PPM
 
 
|-
 
|-
 
|[[File:Fume Extractor.jpg|alt=Fume Extractor|200x200px|center|frameless]]
 
|[[File:Fume Extractor.jpg|alt=Fume Extractor|200x200px|center|frameless]]
 
|'''Fume Extractor'''
 
|'''Fume Extractor'''
 
|PACE  
 
|PACE  
−
8888-0825
+
<nowiki> 8888-0825</nowiki>
−
|<p style="text-align:right;">?</p>
+
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
−
|PPM
+
| style="vertical-align:middle;" |
−
|-
+
|
−
|<center>'''Picture'''</center>
+
|
−
|<center>'''Item'''</center>
+
|
−
|<center>'''Manufacturer'''</center>
 
−
|<center>'''Estimated<br>Value'''</center>
 
−
|<center>'''Owner'''</center>
 
 
|}
 
|}
  
−
<gallery>
+
<gallery widths="200" heights="125">
−
File:IMPULSE SEALER LABEL.jpg|alt=IMPULSE HEAT SEALER label|<center>IMPULSE&nbsp;SEALER<br>label</center>
+
File:IMPULSE SEALER LABEL.jpg|alt=IMPULSE HEAT SEALER label|'''IMPULSE SEALER label'''
 
</gallery>
 
</gallery>
  
−
===3D Printing -- Computers&nbsp;&nbsp;===
+
===3D Printing — Computers&nbsp;&nbsp;===
−
{| class="wikitable sortable"
+
{| class="wikitable"
−
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#ee9f21; color:#ffffff;"
+
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important;; background-color:#ee9f21; color:#000000;"
−
| style="vertical-align:middle;" |Picture
+
|Item
−
|'''Item'''
+
|Application<br>Software
−
|'''Manufacturer'''
+
|System<br>Software
−
|'''Model<br>Number'''
+
|Manufacturer/<br>Model
−
|'''CPU'''
+
|CPU
−
|CinebenchR23
+
|Memory/<br>Storage
−
|'''Memory'''
 
−
|'''Storage'''
 
−
|'''System<br>Software'''
 
−
|'''Application<br>Software'''
 
−
|'''Estimated<br>Value'''
 
−
|'''Owner'''
 
 
|-
 
|-
−
|
+
|'''laptop computer'''
−
|'''computer'''  
+
|[https://www.prusa3d.com/page/prusaslicer_424/ PrusaSlicer]
−
'''(Resin&nbsp;machine),'''
 
  
−
"M-DESIGN-5-G"
 
−
|
 
−
|
 
−
|
 
−
|
 
−
|
 
−
|
 
−
|Windows 10
 
−
|[https://www.prusa3d.com/page/prusaslicer_424/ PrusaSlicer]
 
 
[https://lychee.mango3d.io/ Lychee&nbsp;Slicer]
 
[https://lychee.mango3d.io/ Lychee&nbsp;Slicer]
 +
 
[https://www.repetier-server.com/ Repetier&#8209;Server]
 
[https://www.repetier-server.com/ Repetier&#8209;Server]
−
|<p style="text-align:right;">$300</p>
+
|Microsoft Windows 10
−
|PPM
 
−
|-
 
−
|
 
−
|'''laptop computer'''
 
 
|Dell
 
|Dell
−
|
 
−
|
 
−
|
 
−
|
 
−
|
 
−
|
 
−
|[https://www.prusa3d.com/page/prusaslicer_424/ PrusaSlicer]
 
−
[https://lychee.mango3d.io/ Lychee&nbsp;Slicer]
 
−
[https://www.repetier-server.com/ Repetier&#8209;Server]
 
−
|
 
−
|PPM
 
−
|-
 
−
|
 
−
|'''46"'''
 
−
'''smart TV'''[[File:Level 1 badge.png|left|frameless|49x49px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_1_badge.png]]
 
−
|SAMSUNG
 
−
|[https://www.samsung.com/us/video/tvs/UN46ES7100FXZA-specs UN46ES7100F]
 
−
|
 
−
|
 
−
|
 
−
|
 
−
|
 
−
|
 
−
|<p style="text-align:right;">?</p>
 
−
|PPM
 
−
[https://wiki.pikespeakmakerspace.org/index.php/Donations_Received#2022 (donated by Nate Rojas)]
 
−
|-
 
−
|<center>'''Picture'''</center>
 
−
|<center>'''Item'''</center>
 
−
|<center>'''Manufacturer'''</center>
 
−
|<center>'''Model<br>Number'''</center>
 
−
|<center>'''CPU'''</center>
 
−
|<center>'''CinebenchR23'''</center>
 
−
|<center>'''Memory'''</center>
 
−
|<center>'''Storage'''</center>
 
−
|<center>'''System<br>Software'''</center>
 
−
|<center>'''Application<br>Software'''</center>
 
−
|<center>'''Estimated<br>Value'''</center>
 
−
|<center>'''Owner'''</center>
 
−
|}
 
−
 
−
 
−
===3D Printing -- Not Working&nbsp;&nbsp;===
 
−
{| class="wikitable sortable"
 
−
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#ee9f21; color:#ffffff;"
 
−
| style="vertical-align:middle;" |Picture
 
−
|'''Item'''
 
−
|'''Manufacturer'''
 
−
|'''Model<br>Number'''
 
−
|'''Manual'''
 
−
|'''Estimated<br>Value'''
 
−
|'''Owner'''
 
−
|'''Status<br>Up/Down'''
 
−
|'''Problem<br>Description'''
 
−
|-
 
−
|
 
−
|'''Tevo 3D printers (2)'''
 
−
|
 
−
|
 
−
|
 
−
|<p style="text-align:right;">?</p>
 
−
|PPM
 
−
|Down
 
−
(03/23/22)
 
−
|?
 
−
|-
 
−
|
 
−
|'''computer'''
 
−
'''(Slicing&nbsp;machine),'''
 
−
 
−
'''"M-DESIGN-3-G"'''
 
−
|hp
 
−
|Z200
 
−
|N/A
 
−
|<p style="text-align:right;">$500</p>
 
−
|PPM
 
−
|Working,
 
−
but not online
 
−
|Windows 7
 
−
|-
 
−
|
 
−
|'''hot air'''
 
−
'''material (pellet)'''
 
  
−
'''dryer'''
 
−
|[http://www.ppe.com/ Plastic Process Equipment]
 
−
|THD-U SERIES
 
−
|Yes
 
−
|<p style="text-align:right;">?</p>
 
−
| PPM
 
−
[[Donations Received|(donated by TITAN ROBOTICS)]]
 
−
|Down
 
−
|Under construction
 
−
|-
 
 
|
 
|
−
|'''3D Printer<br>(high temp)'''
 
−
|Stratasys
 
−
|N/A
 
−
|N/A
 
−
|<p style="text-align:right;">$1,000</p>
 
−
| PPM
 
−
[[Donations Received|(donated by TITAN ROBOTICS)]]
 
−
|Down
 
−
|Under construction
 
−
|-
 
 
|
 
|
−
|'''RapMan 3'''
 
−
'''3D Printer'''
 
−
|
 
−
|RapMan 3
 
−
|N/A
 
−
|<p style="text-align:right;">$100</p>
 
−
|PPM
 
−
|Down
 
−
|Needs board wired and power supply hooked up.
 
−
|-
 
−
|[[File:Formlabs Form 2.jpg|alt=Formlabs Form 2 resin printer|200x200px|center|frameless]]
 
−
|'''Form 2'''
 
−
'''resin printer'''
 
−
|Form
 
−
|Form 2
 
−
|Included
 
−
|<p style="text-align:right;">$2,500</p>
 
−
|PPM
 
−
(donated)
 
−
|Down
 
−
|Unable to get successful prints.
 
−
May need new resin or new bed.
 
 
|-
 
|-
 
|
 
|
Line 402: Line 192:
 
|
 
|
 
|
 
|
−
|
 
−
|
 
−
|
 
−
|-
 
−
|
 
−
|'''various Raspberry Pi boards'''
 
−
|
 
−
|
 
−
|N/A
 
−
|<p style="text-align:right;">?</p>
 
−
|PPM
 
−
|Working(?)
 
−
 
−
but not online
 
−
|
 
−
|-
 
−
|<center>'''Picture'''</center>
 
−
|<center>'''Item'''</center>
 
−
|<center>'''Manufacturer'''</center>
 
−
|<center>'''Model<br>Number'''</center>
 
−
|<center>'''Manual'''</center>
 
−
|<center>'''Estimated<br>Value'''</center>
 
−
|<center>'''Owner'''</center>
 
−
|<center>'''Status<br>Up/Down'''</center>
 
−
|<center>'''Problem<br>Description'''</center>
 
 
|}
 
|}
−
 
+
'''Hand Tools'''<gallery widths="200" heights="125">
−
===Hand Tools===
+
File:INFRARED THERMOMETER.jpg|alt=INFRARED THERMOMETER|'''INFRARED THERMOMETER'''
−
<gallery>
 
−
File:INFRARED THERMOMETER.jpg|alt=INFRARED THERMOMETER|<center>INFRARED THERMOMETER</center>
 
 
</gallery>
 
</gallery>
−
:<span style="color:#FFFFFF; background:#EE9F21">&nbsp;3D Printing Area&nbsp;</span> hand tools should be marked with <span style="color:#EE9F21">'''orange'''</span> tape or paint.
+
:'''3D Printing Area''' hand tools should be marked with <span style="color:#EE9F21">'''orange'''</span> tape or paint.
 
:Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.
 
:Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.
  
−
===[[Donations Received]]===
+
==Benefits ==
−
===[[Wish List#3D Printing|Wish List]]===
 
−
:Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make.
 
−
 
 
−
==Benefits and Policies==
 
  
 
{{Member Benefits}}
 
{{Member Benefits}}
  
−
===[https://pikespeakmakerspace.org/reserve Equipment Reservations]===
+
==Policies==
 +
'''PPE'''
 +
:[http://bit.ly/ppmstuff '''Donate for PPE''']
 +
:'''''Or, leave donations in a black payment box, or use a QR code.'''''
  
 +
{{Red Tags}}
  
−
===PPE===
+
==Modeling Software==
−
:[http://bit.ly/ppmstuff '''Donate for PPE''']
+
:'''[https://www.autodesk.com/products/fusion-360/overview Autodesk Fusion]''' — integrated, cloud-based CAD and CAM software
−
:'''Or, leave donations in a black payment box, or use a QR code.'''
+
:'''[https://www.blender.org/ Blender]''' — for creating 3D printed models (and much more)
  
−
===Materials===
+
==Slicing Software==
−
:
+
:'''[https://help.prusa3d.com/en/category/prusaslicer_204 PrusaSlicer]''' — prepare ("slice") 3D models for 3D printing
−
{| class="wikitable"
 
−
|+Filament For Sale
 
−
!Picture
 
−
!'''Material'''
 
−
!Filament Size
 
−
!Color
 
−
!Website
 
−
!Sale Price
 
−
|-
 
−
|[[File:Filament CSL.jpg|alt=Filament CSL|center|frameless|222x222px]]
 
−
|'''Copolyester'''
 
−
|2.85mm
 
−
|White
 
−
|[https://www.chromastrandlabs.com/ chromastrandslab.com]
 
−
|'''$20'''
 
−
(1 kg spool,
 
  
−
Factory Sealed)
+
==Member Showcase==
−
|-
+
<gallery widths="200" heights="125">
−
|[[File:Filament IC3D.jpg|alt=Filament IC3D|center|frameless|222x222px]]
+
File:Camera slider whole.jpg|alt=3D Printed camera slider|'''camera slider<br><i>by Trevor Banks</i>'''
−
|'''PETG'''
+
File:Camera slider.jpg|alt=3D Printed camera slider|'''camera slider closeup<br><i>by Trevor Banks</i>'''
−
|1.75mm
+
File:Benchy from MMU.jpg|alt=colorful Benchy 3D print|'''colorful "Benchy"<br>using Prusa MMU'''
−
|Clear
+
File:Benchy.jpg|alt=Benchy 3D print|'''"Benchy" 3D Printing<br>benchmark test'''
−
|[https://www.ic3dprinters.com ic3dprinters.com]
+
File:Lion 3D Printed.jpg|alt=3D Printed Hairy Lion|'''Hairy Lion<br>3D Printing test'''
−
|'''$20'''  
+
File:Tesla Prusa.jpg|alt=3D printed Nikola Tesla bust|'''Tesla bust<br>8 inches tall'''
−
(1 kg spool,
+
File:Toilet paper holder.jpg|alt=Toilet paper holder|'''Stormtrooper<br>Toilet paper holder'''
 +
File:InMoov robot.jpg|alt=InMoov robot torso|'''Open source<br>InMoov robot<br><i>by Kelly C.</i>'''
 +
File:HACKberry 3D printed hand.jpg|alt=exiii prosthetic/robotic hand|'''Open source "HACKberry"<br>prosthetic/robotic hand (exiii)<br><i>by Tima Anankitpaiboon</i>'''
 +
File:HACKberry 3 hands.jpg|alt=HACKberry 3 hands|'''Open source "HACKberry"<br>prosthetic/robotic hands<br><i>by Tima Anankitpaiboon</i>'''
 +
File:3D Printing at the SUMMIT.jpg|alt=3D Printing at the SUMMIT|'''3D Printing record attempt<br>at the SUMMIT of PIKES PEAK<br>14,110 FT.'''
 +
</gallery>
  
−
Factory Sealed)
+
{{Template:Showcase_blurb}}
−
|-
 
−
|[[File:Filament Village Plastics.jpg|alt=Filament Village Plastics|center|frameless|222x222px]]
 
−
|'''PETG'''
 
−
|1.75mm
 
−
|Clear
 
−
|[https://www.villageplastics.com/ villageplastics.com/]
 
−
|'''$20'''
 
−
(1 kg spool,
 
  
−
Factory Sealed)
+
== Related Pages==
−
|}
+
'''Links to related PPM Wiki pages:'''
−
:'''Donate for "3D Print Filament":  [https://bit.ly/ppmstuff bit.ly/ppmstuff]'''
 
−
:Filament Cost $0.02<sup>9</sup> per Gram
 
−
:'''Or, leave donations in a black payment box, or use a QR code.'''
 
  
−
===[[New Member Orientation#Red Tags|Red Tags]]===
+
:[[3D Printing -- Resin|<span style="color:#000000; background:#EE9F21">&nbsp;&nbsp;'''3D Printing — Resin (SLA)'''&nbsp;&nbsp;</span>]]
  
−
{{Scrap and Trash}}
+
:[[3D Scanning|<span style="color:#000000; background:#EE9F21">&nbsp;&nbsp;'''3D Scanning'''&nbsp;&nbsp;</span>]]
  
−
==Software==
+
:[[Computers|<span style="color:#000000; background:#D0DD27">&nbsp;&nbsp;'''Computers — Windows'''&nbsp;&nbsp;</span>]]
−
'''Modeling sw'''
 
−
:'''[[Autodesk Fusion 360 Tips|Fusion 360]]'''
 
−
'''Slicing sw'''
 
−
:[https://lychee.mango3d.io/ '''Lychee Slicer'''] (free version) for ANYCUBIC resin printer.
 
−
:'''[https://help.prusa3d.com/en/category/prusaslicer_204 PrusaSlicer]'''
 
−
'''Server sw'''
 
−
:[https://www.repetier-server.com/ '''Repetier-Server'''] Go to our Slack channel to get login credentials.
 
  
−
==Member Showcase ==
+
:[[Raspberry Pi|<span style="color:#ffffff; background:#864199">&nbsp;&nbsp;'''Raspberry Pi'''&nbsp;&nbsp;</span>]]
−
<gallery>
 
−
File:Benchy.jpg|alt=Benchy|<center>"Benchy"<br>3D Printing<br>benchmark test</center>
 
−
File:Camera slider whole.jpg|alt=3D Printed camera slider|<center>3D printed<br>camera slider<br>by Trevor Banks</center>
 
−
File:Camera slider.jpg|alt=3D Printed camera slider|<center>camera slider closeup</center>
 
−
File:Lion 3D Printed.jpg|alt=3D Printed Lion|<center>3D Printed Lion</center>
 
−
File:Tesla Prusa.jpg|alt=3D printed Nikola Tesla|<center>Tesla bust<br>8 inch tall</center>
 
−
File:Toilet paper holder.jpg|alt=Toilet paper holder|<center>Toilet paper holder</center>
 
−
File:InMoov robot.jpg|alt=InMoov robot|<center>Open-source<br>InMoov robot<br>by Kelly C.</center>
 
−
File:HACKberry 3D printed hand.jpg|alt=exiii prosthetic/robotic hand|<center>Open-source<br>prosthetic/robotic hand<br>Tima Anankitpaiboon</center>
 
−
File:HACKberry 3 hands.jpg|alt=HACKberry 3 hands|<center>Open-source<br>prosthetic/robotic hands<br>Tima Anankitpaiboon</center>  
 
−
</gallery>
 
  
−
{{Template:Showcase_blurb}}
+
:'''[[PrusaSlicer Tips]]'''
 +
:'''[[Autodesk Fusion Tips]]'''
 +
:'''[[Blender Tips]]'''
 +
:'''[[STL File Format Tips]]'''
 +
:'''[[QR Codes]]'''
  
 +
==Hand-Curated Links==
 +
'''Links to member-recommended external sites:'''
 +
:'''[https://www.multiboard.io/ Multiboard]''' — "3D Printed Storage System"
 +
:'''[https://gridfinity.xyz/catalog/ Gridfinity]''' — The modular, open-source grid storage system for your workshop
 +
:'''[https://www.stlfinder.com/\ STLFinder]''' — search engine for free 3d models
 +
:'''[https://www.3dbenchy.com/ 3DBenchy]''' — 3D torture test (benchmark)
 +
:'''[https://www.exiii-hackberry.com/ HACKberry]''' — 3D-printable open source bionic arm
  
−
==See Also ==
+
'''Links to member-recommended YouTube videos:'''
−
Links to other PPM Wiki pages (internal links):
+
:'''[https://www.youtube.com/channel/UCeIsImKtiNm7D_BxfG4n7zg/playlists "Things we've built"]''', including 3D-printed robotic hand (2015)
−
:[[Autodesk Fusion 360 Tips|'''Autodesk Fusion 360 Tips''']]
+
:'''[https://www.youtube.com/watch?v=OzIGfcIyBnc Jay Leno on 3D scanning and 3D printing from 3D Systems]''' — (8 years ago)
−
:'''[[Lithophane Links]]'''
 
−
:[[Raspberry Pi|'''Raspberry Pi''']]
 
−
:'''[[Computers]]'''
 
  
−
==Curated Links==
+
==For Additional Help==
−
Links to other sites (external links):
+
:Use our PPM Slack channel #3d-printing for FDM or SLA printing questions.
−
:'''[https://help.prusa3d.com/ PRUSA KNOWLEDGE BASE]'''
+
:[[How To Slack#PPM Channel Names and Descriptions|'''List of all PPM Slack channels''']]
−
:'''[https://www.youtube.com/channel/UCLHAxAdvAKJY0niRJZRYMvg Prusa 3D by Josef Prusa]''' - YouTube channel
+
:Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the&nbsp;community.
−
:[https://www.simplify3d.com/support/materials-guide/#all '''Ultimate 3D Printing Materials Guide'''] -- SIMPLYFY3D
 
−
 
 
−
==Other Fun Stuff==
 
−
Links to other sites (external links):
 
−
:'''https://www.3dbenchy.com/''' -- 3D torture test
 
−
:'''https://www.etsy.com/market/lithophanes'''
 
−
:'''https://www.thingiverse.com/search?q=lithophanes'''
 
−
:'''https://www.klipper3d.org/''' -- 3d-Printer firmware
 
−
<br>
 
−
<hr>
 
 
{{Template:Footer}}
 
{{Template:Footer}}
−
 
+
{{Template:Ideas into reality}}
−
[[Category:Volunteers Needed]]
+
<p style="padding:0.2em 0.4em; background:#EE9F21; color:#FFFFFF; font-size:15%;"> &nbsp; </p>
 
<!--Woodshop-->
 
<!--Woodshop-->

Latest revision as of 18:10, 23 November 2024

Level 2 badge used at Pikes Peak Makerspace

The 3D Printing Area at Pikes Peak Makerspace (PPM) consists mostly of Level 2 equipment.

Additional PPM training is required to use any of our Level 2 equipment.

Additional PPM training and then PPM certification is required to use any of our Level 3 equipment.

Our trainers are passionate about sharing their knowledge and ensuring a positive learning experience for all.

We are grateful for their commitment and dedication to our community.

No reservations are required for any of our 3D Printers at this time, they are "first-come, first-served".

3D Printing Area hand tools should be marked with orange tape or paint.

Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.

 


Safety First

Members must know the following information:

In case of emergency, call 911.
Our physical location is:
735 East Pikes Peak Avenue
Colorado Springs, CO 80903
use this when ordering pizza or an ambulance
  • Emergency sign

    IN CASE OF
    EMERGENCY
    sign

PPM Fire Escape Plan

Fire Escape Plan maps are posted throughout the Makerspace.
There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.
  • PPM Emergency Evacuation Plan 040721

    PPM Emergency
    Evacuation Plan.pdf

  • PPM Fire Prevention Plan 0407022

    PPM Fire
    Prevention Plan.pdf

  • PPM Fire Escape Plan

    PPM Fire Escape
    Plan

First Aid

There is a FIRST AID Supply Cabinet in our Kitchen Area.
FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.
  • FIRST AID Supply Cabinet

    FIRST AID
    Supply Cabinet

  • FIRST AID kit

    FIRST AID
    Kit

Eye Wash Stations

Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.
  • EMERGENCY EYE & FACE WASH STATION

    Emergency
    Eye & Face Wash
    Station

Personal Protective Equipment (PPE)

Wear protective equipment in all Wood and Metal Shop Areas.
Wear gloves when using Isopropyl Alcohol and other cleaners.
  • SAFETY GOGGLES

    Personal Protective Equipment (PPE)

Hazardous Chemicals

All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.
Review the Safety Data Sheet (SDS) information of unknown products before use.
SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.
Do not bring dangerous chemicals to the makerspace.
Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.
Please DO NOT paint indoors.
  • flammables cabinet

    Flammables Cabinet
    in the Vented Room



Impairment

The use of PPM equipment requires you to be alert, attentive, and focused.
Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.



 

Classes

PPM announces its Upcoming events, including classes, on Meetup
To help out in the 3D Printing Area at PMM, use our #3d-printing channel on Slack.

Training

FDM vs SLA 3D Printing — according to the "new Bing"
"FDM and SLA are two different types of 3D printing technologies that use different materials and methods to create parts. FDM stands for fused deposition modeling, and SLA stands for stereolithography. Here are some of the main differences between them:
FDM uses a heated nozzle to extrude melted plastic filament one layer at a time on a build platform. SLA uses a UV laser to cure liquid resin one layer at a time in a resin tank.
FDM can print with a variety of thermoplastic materials, such as ABS, PLA, PETG, and nylon. SLA can print with different types of resin materials, such as standard, engineering, and dental resins.
FDM has more color options and similar strength in the X and Y directions than SLA. SLA has better surface finish, detail, and speed than FDM.
FDM is cheaper, more user-friendly, and more reliable than SLA. SLA is more expensive, requires more post-processing, and is more sensitive to environmental factors than FDM.
FDM is suitable for basic proof-of-concept models, quick and low-cost prototyping, and simple parts that might be machined. SLA is ideal for high-detail parts, molds, patterns, and functional parts that require tight tolerances and smooth surfaces."


Intro To 3D Printing — new class information from Josh Rafail
PRUSA KNOWLEDGE BASE
Prusa Material Table
Prusa 3D by Josef Prusa — YouTube channel
Ultimate 3D Printing Materials Guide — SIMPLYFY3D
44 Common 3D Print Problems — on 3dsourced.com
RepRap Glossary — common terms and abbreviations


Warn.png The following pages contain historical information. The pages are provided for reference only.

Introduction to 3D Printing

Equipment Lists

3D Printers

Item Manufacturer/
Model 		Build
Volume 		Upgrades Resources
3D Printer #1
Level 2 badge
 Prusa /

MK3S

250x210x200 mm (stock)
3D Printer #2
Level 2 badge
 Prusa /

MK3S

250x210x200 mm (stock)
3D Printer #3
Level 2 badge
 Prusa /

MK3S

E3D Revo Hotend

2 Fan Upgrade
Quick fit nozzle
Obsidian nozzle
Bed w/ PEI coating

Prusa Upgrades - E3D
3D Printer (MEDUSA)

Level 3 badge

Prusa /

MK3S

E3D Revo Hotend

2 fan upgrade
Quick fit nozzle
Brass nozzle
Bed w/ PEI coating

Prusa Upgrades - E3D

3D Printing Equipment — Level 1

Picture Item Manufacturer/
Model 		Resources
3Doodler create
 3Doodler create 3Doodler

STAR TREK

Getting Started
Dryer oven
 lab oven / dryer

with timer

(12"x12"x12" interior)

Curtin Matheson
IMPULSE SEALER new
 IMPULSE HEAT SEALER

12" w cutter

Midwest Pacific,

MP-12C

filament dryer box
 filament dryer box PPM
Fume Extractor
 Fume Extractor PACE

8888-0825

  • IMPULSE HEAT SEALER label

    IMPULSE SEALER label

3D Printing — Computers  

Item Application
Software 		System
Software 		Manufacturer/
Model 		CPU Memory/
Storage
laptop computer PrusaSlicer

Lychee Slicer

Repetier‑Server

Microsoft Windows 10 Dell

Hand Tools

  • INFRARED THERMOMETER

    INFRARED THERMOMETER

3D Printing Area hand tools should be marked with orange tape or paint.
Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Benefits

PPM members enjoy discounts at the following local merchants:
(bring proof of membership)
Company Website Benefit Directions to
Logo WOODCRAFT
 Woodcraft of Colorado Springs 10% discount    4438 Austin Bluffs Parkway
Logo CO Lumber
 CO Lumber Specialties 10% discount 3636 Stone Avenue
Logo General Air
 GENERAL AIR 10% discount 3031 N Nevada Ave.
Logo ACE
 ACE Hardware Uintah Gardens 10% discount 1830 W Uintah Street
Map of stores that provide PPM member discounts
Map of helpful local resources curated by our makers
At home LightBurn subscriptions can be purchased at a discounted rate for being a PPM member.
The discount code is saved as a Pinned Message in our 'laser-cutter' channel in Slack.

Policies

PPE

Donate for PPE
Or, leave donations in a black payment box, or use a QR code.

Red Tags

If equipment needs repairs, place a Red Tag on it and report it via the Pikes Peak Makerspace Slack channel #red-tags-issues
This advises others on the malfunctioning equipment and ensures that actions can be taken to service/repair the equipment.

Modeling Software

Autodesk Fusion — integrated, cloud-based CAD and CAM software
Blender — for creating 3D printed models (and much more)

Slicing Software

PrusaSlicer — prepare ("slice") 3D models for 3D printing

Member Showcase

  • 3D Printed camera slider

    camera slider
    by Trevor Banks

  • 3D Printed camera slider

    camera slider closeup
    by Trevor Banks

  • colorful Benchy 3D print

    colorful "Benchy"
    using Prusa MMU

  • Benchy 3D print

    "Benchy" 3D Printing
    benchmark test

  • 3D Printed Hairy Lion

    Hairy Lion
    3D Printing test

  • 3D printed Nikola Tesla bust

    Tesla bust
    8 inches tall

  • Toilet paper holder

    Stormtrooper
    Toilet paper holder

  • InMoov robot torso

    Open source
    InMoov robot
    by Kelly C.

  • exiii prosthetic/robotic hand

    Open source "HACKberry"
    prosthetic/robotic hand (exiii)
    by Tima Anankitpaiboon

  • HACKberry 3 hands

    Open source "HACKberry"
    prosthetic/robotic hands
    by Tima Anankitpaiboon

  • 3D Printing at the SUMMIT

    3D Printing record attempt
    at the SUMMIT of PIKES PEAK
    14,110 FT.

For even more member projects, visit our #showcase channel on Slack, or follow our social media links.

Related Pages

Links to related PPM Wiki pages:

  3D Printing — Resin (SLA)  
  3D Scanning  
  Computers — Windows  
  Raspberry Pi  
PrusaSlicer Tips
Autodesk Fusion Tips
Blender Tips
STL File Format Tips
QR Codes

Hand-Curated Links

Links to member-recommended external sites:

Multiboard — "3D Printed Storage System"
Gridfinity — The modular, open-source grid storage system for your workshop
STLFinder — search engine for free 3d models
3DBenchy — 3D torture test (benchmark)
HACKberry — 3D-printable open source bionic arm

Links to member-recommended YouTube videos:

"Things we've built", including 3D-printed robotic hand (2015)
Jay Leno on 3D scanning and 3D printing from 3D Systems — (8 years ago)

For Additional Help

Use our PPM Slack channel #3d-printing for FDM or SLA printing questions.
List of all PPM Slack channels
Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the community.

Search the PPM Wiki — include Content pages as well as Multimedia.

Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.

Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative processes by providing shared space, shared tools, materials, software, and a knowledge base to turn their ideas into reality.

 

Retrieved from "https://wiki.pikespeakmakerspace.org/index.php?title=3D_Printing&oldid=18017"