Difference between revisions of "3D Printing"

From Pikes Peak Makerspace Wiki
Jump to navigation Jump to search
 
(571 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
[[File:Lvl2.png|alt=Level 2 icon|left|50x50px|frameless]]
+
[[File:Level 2 badge.png|alt=Level 2 badge used at Pikes Peak Makerspace|left|frameless|100x100px|PPM TRAINING REQUIRED]]
−
[[File:Tesla Prusa.jpg|alt=Tesla bust|thumb|267x267px|3D Printed Tesla bust<br>8 inches tall]]
 
−
'''The 3D Printing Area consists mostly of Level 2 equipment'''.
 
  
−
Additional training is required to use our Level 2 equipment.
+
'''The 3D Printing Area at Pikes Peak Makerspace (PPM) consists mostly of Level&nbsp;2 equipment.'''
  
−
==Safety First==
+
Additional PPM training is required to use any of our Level&nbsp;2 equipment.
  
−
===[[Covid-19 notice]]===
+
Additional PPM training and then PPM certification is required to use any of our Level 3 equipment.
  
−
=== In case of emergency, call 911 ===
+
Our trainers are passionate about sharing their knowledge and ensuring a positive learning experience for&nbsp;all.
−
Our location is 735 East Pikes Peak Avenue, Colorado Springs, CO  80903
 
−
===Personal Protective Equipment (PPE)===
 
−
Wear gloves when using Isopropyl Alcohol and other cleaners.
 
  
−
==3D  Printing Classes and Training==
+
We are grateful for their commitment and dedication to our community.
  
−
===Area Captain ===
+
No reservations are required for any of our 3D Printers at this time, they are "first-come, first-served".
−
Trevor Banks
 
  
−
=== Classes ===
+
'''3D Printing Area''' hand tools should be marked with <span style="color:#EE9F21">'''orange'''</span> tape or paint.
−
Pikes Peak Makerspace announces its [https://www.meetup.com/pikespeakmakerspace/events '''Upcoming events, including classes, on Meetup''']
+
<br>
 +
<br>
 +
{{Template:Contact Us}}
 +
 
 +
<p style="padding:0.2em 0.4em;  background:#EE9F21; color:#FFFFFF; font-size:15%;"> &nbsp; </p>
 +
<br>
 +
{{Template:Safety}}
 +
<br>
 +
<br>
 +
<p style="padding:0.2em 0.4em; background:#EE9F21; color:#FFFFFF; font-size:15%;"> &nbsp; </p>
 +
 
 +
== Classes ==
 +
:PPM announces its [https://www.meetup.com/pikespeakmakerspace/events '''Upcoming events, including classes, on Meetup''']
 +
:To help out in the 3D Printing Area at PMM, use our #3d-printing channel on Slack.
 +
==Training ==
 +
:'''FDM vs SLA 3D Printing — according to the "new Bing"'''
 +
 
 +
::''"FDM and SLA are two different types of 3D printing technologies that use different materials and methods to create parts. FDM stands for fused deposition modeling, and SLA stands for stereolithography. Here are some of the main differences between them:''
 +
 
 +
::''FDM uses a heated nozzle to extrude melted plastic filament one layer at a time on a build platform. SLA uses a UV laser to cure liquid resin one layer at a time in a resin tank.''
  
−
===For Help ===
+
::''FDM can print with a variety of thermoplastic materials, such as ABS, PLA, PETG, and nylon. SLA can print with different types of resin materials, such as standard, engineering, and dental resins.''
−
Message in PPM Slack channel #3d-printing
+
::''FDM has more color options and similar strength in the X and Y directions than SLA. SLA has better surface finish, detail, and speed than FDM.''
 +
::''FDM is cheaper, more user-friendly, and more reliable than SLA. SLA is more expensive, requires more post-processing, and is more sensitive to environmental factors than FDM.''
 +
::''FDM is suitable for basic proof-of-concept models, quick and low-cost prototyping, and simple parts that might be machined. SLA is ideal for high-detail parts, molds, patterns, and functional parts that require tight tolerances and smooth surfaces."''
 +
<br>
 +
:'''[https://docs.google.com/document/d/19Kd1ZjBzIkBxqTE1KEoXh08TGZZaiooPNXcRInKPV5E/edit?usp=drivesdk Intro To 3D Printing] — new class information from Josh&nbsp;Rafail'''
  
 +
:'''[https://help.prusa3d.com/ PRUSA KNOWLEDGE BASE]'''
 +
:'''[https://help.prusa3d.com/materials Prusa Material Table]'''
 +
:'''[https://www.youtube.com/channel/UCLHAxAdvAKJY0niRJZRYMvg Prusa 3D by Josef Prusa]''' — YouTube channel
 +
:'''[https://www.simplify3d.com/support/materials-guide/#all Ultimate 3D Printing Materials Guide]''' — SIMPLYFY3D
 +
:'''[https://www.3dsourced.com/rigid-ink/ultimate-3d-printing-troubleshooting-guide/ 44 Common 3D Print Problems]''' — on 3dsourced.com
 +
:'''[https://reprap.org/wiki/Glossary RepRap Glossary]''' —  common terms and abbreviations
 +
<br>
 +
:{{Template:Historical}}
 +
:'''[[Introduction to 3D Printing]]'''
  
−
'''[[Introduction to 3D Printing]] class info'''
+
==Equipment Lists==
  
−
'''[[Intro to SLA 3D Printing]] class info'''
+
===3D Printers===
−
==Equipment List==
+
{| class="wikitable"
−
{| class="wikitable sortable mw-collapsible"
+
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#ee9f21; color:#000000;"
−
|+
+
|Item
−
!Picture
+
|Manufacturer/<br>Model
−
!'''Item'''
+
|Build<br>Volume
−
!'''Manufacturer'''
+
|Upgrades
−
!'''Model'''
+
|Resources
−
'''Number'''
 
−
!'''Estimated Value'''
 
−
!'''Manual'''
 
−
!'''Serial'''
 
−
'''Number'''
 
−
!'''Owner'''
 
−
!'''Status'''
 
−
Up/Down
 
−
!'''Problem'''
 
−
'''Description'''
 
 
|-
 
|-
−
|
+
|'''3D Printer&nbsp;#1'''  
−
|'''Prusa Mk2s'''
+
 
−
'''(Medussa)'''
+
[[File:Level_2_badge.png|alt=Level 2 badge|left|frameless|55x55px]]
−
|Prusa Research
+
|Prusa /  
−
|N/A
+
MK3S
−
|$1,000
+
|250x210x200 mm
−
|Included
+
|(stock)
−
|N/A
 
−
|PPM
 
−
|Up
 
 
|
 
|
 
|-
 
|-
 +
|'''3D Printer&nbsp;#2'''
 +
 +
[[File:Level_2_badge.png|alt=Level 2 badge|left|frameless|55x55px]]
 +
|Prusa /
 +
MK3S
 +
|250x210x200 mm
 +
|(stock)
 
|
 
|
−
|'''Prusa Mk2s'''
 
−
'''MMU2'''
 
−
|Prusa Research
 
−
|
 
−
|
 
−
|Included
 
−
|N/A
 
−
|PPM
 
−
|Down
 
−
|MMU (Multi Material Unit) needs repair.
 
−
<s>Under Warranty?</s>
 
 
|-
 
|-
 +
|'''3D Printer&nbsp;#3'''
 +
 +
[[File:Level_2_badge.png|alt=Level 2 badge|left|frameless|55x55px]]
 +
|Prusa /
 +
MK3S
 
|
 
|
−
|'''Prusa MK2S (Haywire)'''
+
|E3D Revo Hotend<br>
−
|Prusa Research
+
2 Fan Upgrade<br>
−
|Prusa MK2S
+
Quick fit nozzle<br>
−
|$350
+
Obsidian nozzle<br>
−
|Included
+
Bed w/ PEI coating
−
|N/A
+
|[https://e3d-online.com/collections/prusa-upgrades Prusa Upgrades - E3D]
−
|PPM
 
−
| Up
 
−
| Needs new bed and backup thermistors.
 
 
|-
 
|-
−
|[[File:MR T.jpg|alt=MR T 3D printer|center|frameless|200x200px]]
+
|'''3D Printer&nbsp;(MEDUSA)'''
−
|'''Taz 5'''
 
−
'''(Mr. T)'''
 
−
|Lulzbot
 
−
|Taz 5
 
−
|$1,200
 
−
|Included
 
−
|N/A
 
−
|PPM
 
−
|Down
 
−
|
 
−
|-
 
−
|[[File:Vinyl sign.jpg|center|frameless|150x150px]]
 
−
|'''Taz 5'''
 
−
'''(Tizzy)'''
 
−
|Lulzbot
 
−
|Taz 5
 
−
|$1,200
 
−
|Included
 
−
|N/A
 
−
|PPM
 
−
|Down
 
−
| Board may need to be replaced. PEI sheet broken in half.
 
−
Needs new sheet.
 
−
|-
 
−
|[[File:ANYCUBIC_3D_Printer.jpg|alt=ANYCUBIC 3D Printer|center|frameless|200x200px]]
 
−
|'''Anycubic'''
 
−
'''Photon'''
 
  
−
'''resin printer'''
+
[[File:Level_3_badge.png|alt=Level 3 badge|frameless|55x55px]]
−
|Anycubic
+
|Prusa /  
−
|N/A
+
MK3S
−
|$200
 
−
|N/A
 
−
|N/A
 
−
|PPM
 
−
|Up
 
 
|
 
|
−
|-
+
|E3D Revo Hotend<br>
−
|[[File:UV Curing Box.jpg|alt=UV Curing Box|200x200px|center|frameless]]
+
2 fan upgrade<br>
−
|'''UV curing box'''
+
Quick fit nozzle<br>
 +
Brass nozzle<br>
 +
Bed w/ PEI coating
 +
|[https://e3d-online.com/collections/prusa-upgrades Prusa Upgrades - E3D]
 +
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
 
|
 
|
 
|
 
|
Line 129: Line 112:
 
|
 
|
 
|
 
|
−
|PPM
+
|}
−
|Up
+
 
−
|Description:  
+
===3D Printing Equipment — Level 1===
−
6x 6x10 inches
+
{| class="wikitable"
 +
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important;; background-color:#ee9f21; color:#000000;"
 +
| style="vertical-align:middle;" |Picture
 +
|Item
 +
|Manufacturer/<br>Model
 +
|Resources
 
|-
 
|-
−
|
+
|[[File:3Doodler create.jpg|alt=3Doodler create|133x133px|center|frameless]]
−
|'''Computer'''
+
|'''3Doodler create'''
−
'''(laptop)'''
+
|3Doodler
−
|hp
+
 
−
| EliteBook 8570w
+
STAR TREK
−
|
+
|'''[https://learn.the3doodler.com/getting-started/ Getting Started]'''
−
|
 
−
|
 
−
|PPM
 
−
|Up
 
−
|
 
 
|-
 
|-
 
|[[File:Dryer oven.jpg|alt=Dryer oven|200x200px|center|frameless]]
 
|[[File:Dryer oven.jpg|alt=Dryer oven|200x200px|center|frameless]]
−
|'''lab oven / dryer w timer'''
+
|'''lab oven / dryer'''
 +
'''with timer'''
 +
 
 +
(12"x12"x12" interior)
 
|Curtin Matheson
 
|Curtin Matheson
 
|
 
|
 +
|-
 +
|[[File:IMPULSE SEALER new.jpg|alt=IMPULSE SEALER new|center|frameless|120x120px|link=https://wiki.pikespeakmakerspace.org/index.php/File:IMPULSE_SEALER_new.jpg]]
 +
|'''IMPULSE HEAT SEALER'''
 +
'''12" w cutter'''
 +
|Midwest Pacific,
 +
MP-12C
 
|
 
|
−
|(none)
 
−
|
 
−
|PPM
 
−
|Up
 
−
|Description: ~12x12x12 interior
 
 
|-
 
|-
 
|[[File:Filament dryer box.jpg|alt=filament dryer box|200x200px|center|frameless]]
 
|[[File:Filament dryer box.jpg|alt=filament dryer box|200x200px|center|frameless]]
 
|'''filament dryer box'''
 
|'''filament dryer box'''
−
|N/A
 
−
|N/A
 
−
|
 
−
|
 
−
|N/A
 
 
|PPM
 
|PPM
−
|Up
 
 
|
 
|
 
|-
 
|-
 
|[[File:Fume Extractor.jpg|alt=Fume Extractor|200x200px|center|frameless]]
 
|[[File:Fume Extractor.jpg|alt=Fume Extractor|200x200px|center|frameless]]
 
|'''Fume Extractor'''
 
|'''Fume Extractor'''
−
|PACE
+
|PACE  
−
|8888-0825
+
<nowiki> 8888-0825</nowiki>
−
|
+
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
−
|none
+
| style="vertical-align:middle;" |
−
|60112
 
−
|PPM
 
−
|?
 
−
|needs filters, probably
 
−
|-
 
−
|[[File:3Doodler create.jpg|alt=3Doodler create|200x200px|center|frameless]]
 
−
|'''3Doodler create'''
 
−
|
 
−
|STAR TREK
 
 
|
 
|
 
|
 
|
 
|
 
|
−
|PPM
 
−
|
 
−
|
 
−
|-
 
−
|'''Picture'''
 
−
|'''Item'''
 
−
|'''Manufacturer'''
 
−
|'''Model'''
 
−
'''Number'''
 
−
|'''Estimated Value'''
 
−
|'''Manual'''
 
−
|'''Serial'''
 
−
'''Number'''
 
−
|'''Owner'''
 
−
|'''Status'''
 
−
'''Up/Down'''
 
−
|'''Problem'''
 
−
'''Description'''
 
 
|}
 
|}
  
−
{| class="wikitable sortable mw-collapsible"
+
<gallery widths="200" heights="125">
−
|+
+
File:IMPULSE SEALER LABEL.jpg|alt=IMPULSE HEAT SEALER label|'''IMPULSE SEALER label'''
−
!Picture
+
</gallery>
−
!'''Item'''
+
 
−
!'''Manufacturer'''
+
===3D Printing — Computers&nbsp;&nbsp;===
−
!'''Model'''
+
{| class="wikitable"
−
'''Number'''
+
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important;; background-color:#ee9f21; color:#000000;"
−
!'''Estimated Value'''
+
|Item
−
!'''Manual'''
+
|Application<br>Software
−
!'''Serial'''
+
|System<br>Software
−
'''Number'''
+
|Manufacturer/<br>Model
−
!'''Owner'''
+
|CPU
−
!'''Status'''
+
|Memory/<br>Storage
−
Up/Down
 
−
!'''Problem'''
 
−
'''Description'''
 
 
|-
 
|-
−
|
+
|'''laptop computer'''
−
|'''various Raspberry Pi boards'''
+
|[https://www.prusa3d.com/page/prusaslicer_424/ PrusaSlicer]
−
|
+
 
 +
[https://lychee.mango3d.io/ Lychee&nbsp;Slicer]
 +
 
 +
[https://www.repetier-server.com/ Repetier&#8209;Server]
 +
|Microsoft Windows 10
 +
|Dell
 +
 
 
|
 
|
−
|
 
−
|
 
−
|
 
−
|PPM
 
−
|Working(?)
 
−
 
−
but not online
 
 
|
 
|
 
|-
 
|-
 
|
 
|
−
|'''Computer'''
 
−
'''(Resin machine)'''
 
−
|Custom
 
−
|N/A
 
−
|$300
 
−
|N/A
 
−
|M-DESIGN-3-G
 
−
|PPM
 
−
|Working(?)
 
−
 
−
but not online
 
 
|
 
|
−
|-
 
 
|
 
|
−
|'''Computer'''
 
−
'''(Slicing machine)'''
 
−
|Custom
 
−
|N/A
 
−
|$500
 
−
|N/A
 
−
|M-DESIGN-5-G
 
−
|PPM
 
−
|Working(?)
 
−
 
−
but not online
 
 
|
 
|
−
|-
 
 
|
 
|
−
|'''3D Printer (high temp)'''
 
−
|Stratasys
 
−
|N/A
 
−
|$1,000
 
−
|N/A
 
−
|N/A
 
−
|PPM
 
−
|Down
 
−
|Under construction
 
−
|-
 
−
|[[File:Monoprice.jpg|200x200px|alt=|center|frameless]]
 
−
|'''Monoprice Mini 3D Printer'''
 
−
|Monoprice
 
−
|Mini E3D Edition
 
−
|$75
 
−
|N/A
 
−
|21711
 
−
|PPM
 
−
| Down
 
−
|Not plugged in. Should work, needs to be tested.
 
−
|-
 
−
|[[File:Formlabs Form 2.jpg|alt=Formlabs Form 2 resin printer|200x200px|center|frameless]]
 
−
|'''Form 2 resin printer'''
 
−
|Form
 
−
|Form 2
 
−
|$2,500
 
−
|Included
 
−
|ChemicalBear
 
−
|PPM
 
−
|Down
 
−
| Unable to get successful prints
 
−
May need new resin.
 
−
|-
 
 
|
 
|
−
|'''RapMan 3 3D Printer'''
 
−
|Unknown
 
−
|RapMan 3
 
−
|$100
 
−
|N/A
 
−
|N/A
 
−
|PPM
 
−
|Down
 
−
|Needs board wired and powersupply hooked up.
 
−
|-
 
−
|'''Picture'''
 
−
|'''Item'''
 
−
|'''Manufacturer'''
 
−
|'''Model'''
 
−
'''Number'''
 
−
|'''Estimated Value'''
 
−
|'''Manual'''
 
−
|'''Serial'''
 
−
'''Number'''
 
−
|'''Owner'''
 
−
|'''Status'''
 
−
'''Up/Down'''
 
−
|'''Problem'''
 
−
'''Description'''
 
 
|}
 
|}
 +
'''Hand Tools'''<gallery widths="200" heights="125">
 +
File:INFRARED THERMOMETER.jpg|alt=INFRARED THERMOMETER|'''INFRARED THERMOMETER'''
 +
</gallery>
 +
:'''3D Printing Area''' hand tools should be marked with <span style="color:#EE9F21">'''orange'''</span> tape or paint.
 +
:Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.
  
−
===[[Wish List#3D Printing|Wish List]]===
+
==Benefits ==
−
===[[Donations Received]]===
 
−
 
 
−
==Hand Tools==
 
−
Hand tools that belong in the 3D Printing Area should be marked with '''orange''' tape or paint.
 
  
−
Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.
+
{{Member Benefits}}
  
 
==Policies==
 
==Policies==
−
===Materials===
+
'''PPE'''
−
'''Donate for "3D Print Filament": [https://bit.ly/ppmstuff bit.ly/ppmstuff]'''  
+
:[http://bit.ly/ppmstuff '''Donate for PPE''']
 +
:'''''Or, leave donations in a black payment box, or use a QR code.'''''
  
−
Filament Cost $0.02<sup>9</sup> per Gram
+
{{Red Tags}}
  
−
'''Or, leave donations in a black payment box, or use a QR code.'''  
+
==Modeling Software==
 +
:'''[https://www.autodesk.com/products/fusion-360/overview Autodesk Fusion]''' — integrated, cloud-based CAD and CAM software
 +
:'''[https://www.blender.org/ Blender]''' — for creating 3D printed models (and much more)
  
−
===PPE===
+
==Slicing Software==
−
[http://bit.ly/ppmstuff '''Donate for PPE'''] 
+
:'''[https://help.prusa3d.com/en/category/prusaslicer_204 PrusaSlicer]''' — prepare ("slice") 3D models for 3D printing
  
−
'''Or, leave donations in a black payment box, or use a QR code.'''  
+
==Member Showcase==
 +
<gallery widths="200" heights="125">
 +
File:Camera slider whole.jpg|alt=3D Printed camera slider|'''camera slider<br><i>by Trevor Banks</i>'''
 +
File:Camera slider.jpg|alt=3D Printed camera slider|'''camera slider closeup<br><i>by Trevor Banks</i>'''
 +
File:Benchy from MMU.jpg|alt=colorful Benchy 3D print|'''colorful "Benchy"<br>using Prusa MMU'''
 +
File:Benchy.jpg|alt=Benchy 3D print|'''"Benchy" 3D Printing<br>benchmark test'''
 +
File:Lion 3D Printed.jpg|alt=3D Printed Hairy Lion|'''Hairy Lion<br>3D Printing test'''
 +
File:Tesla Prusa.jpg|alt=3D printed Nikola Tesla bust|'''Tesla bust<br>8 inches tall'''
 +
File:Toilet paper holder.jpg|alt=Toilet paper holder|'''Stormtrooper<br>Toilet paper holder'''
 +
File:InMoov robot.jpg|alt=InMoov robot torso|'''Open source<br>InMoov robot<br><i>by Kelly C.</i>'''
 +
File:HACKberry 3D printed hand.jpg|alt=exiii prosthetic/robotic hand|'''Open source "HACKberry"<br>prosthetic/robotic hand (exiii)<br><i>by Tima Anankitpaiboon</i>'''
 +
File:HACKberry 3 hands.jpg|alt=HACKberry 3 hands|'''Open source "HACKberry"<br>prosthetic/robotic hands<br><i>by Tima Anankitpaiboon</i>'''
 +
File:3D Printing at the SUMMIT.jpg|alt=3D Printing at the SUMMIT|'''3D Printing record attempt<br>at the SUMMIT of PIKES PEAK<br>14,110 FT.'''
 +
</gallery>
  
−
===Scrap/Trash===
+
{{Template:Showcase_blurb}}
−
Separate scrap PLA and PETG plastics from Trash, so the plastics can be recycled.
 
  
−
==Software==
+
== Related Pages==
 +
'''Links to related PPM Wiki pages:'''
  
−
===Modeling sw ===
+
:[[3D Printing -- Resin|<span style="color:#000000; background:#EE9F21">&nbsp;&nbsp;'''3D Printing — Resin (SLA)'''&nbsp;&nbsp;</span>]]
−
Fusion 360
 
  
−
===Slicing sw===
+
:[[3D Scanning|<span style="color:#000000; background:#EE9F21">&nbsp;&nbsp;'''3D Scanning'''&nbsp;&nbsp;</span>]]
−
[https://www.prusa3d.com/page/prusaslicer_424/ PrusaSlicer]
 
  
−
[https://lychee.mango3d.io/ Lychee Slicer] (free version)
+
:[[Computers|<span style="color:#000000; background:#D0DD27">&nbsp;&nbsp;'''Computers — Windows'''&nbsp;&nbsp;</span>]]
−
 
 
−
===Server sw===
 
−
[https://www.repetier-server.com/ Repetier-Server]
 
−
<br>
 
−
<br>
 
−
*[[OctoPrint‏‎]] (13:43, 12 December 2015)
 
−
 
 
−
==Showcase==
 
−
 
 
−
===Photo Gallery===
 
−
(Displayed in random order.)
 
−
 
 
−
<gallery>
 
−
File:Hello World.jpg|<center>Taz 5 display</center>
 
−
File:Camera slider whole.jpg|alt=3D printed camera slider|<center>3D printed camera slider<br>(PETG)</center>
 
−
File:Camera slider.jpg|<center>camera slider closeup</center>
 
−
File:Lion 3D Printed.jpg|alt=3D Printed Lion|<center>3D Printed Lion<br>(PLA)</center>
 
−
File:Tesla Prusa.jpg|alt=3D printed Nikola Tesla|<center>Tesla bust<br>(PLA)</center>
 
−
File:Filament dryer box.jpg|alt=Filament dryer box|<center>Filament dryer box</center>
 
−
File:Toilet paper holder.jpg|alt=Toilet paper holder|<center>Toilet paper holder</center>
 
−
</gallery>
 
  
−
===PPM YouTube Channel===
+
:[[Raspberry Pi|<span style="color:#ffffff; background:#864199">&nbsp;&nbsp;'''Raspberry Pi'''&nbsp;&nbsp;</span>]]
−
'''[https://www.youtube.com/channel/UCeIsImKtiNm7D_BxfG4n7zg/featured "featured" videos],''' (the YouTube "HOME" tab)
 
  
−
[https://www.youtube.com/channel/UCeIsImKtiNm7D_BxfG4n7zg/playlists '''"Things we've built'''"], Created playlists, including 3D-printed robotic hand (2015)
+
:'''[[PrusaSlicer Tips]]'''
 +
:'''[[Autodesk Fusion Tips]]'''
 +
:'''[[Blender Tips]]'''
 +
:'''[[STL File Format Tips]]'''
 +
:'''[[QR Codes]]'''
  
−
== Other Fun Stuff ==
+
==Hand-Curated Links==
−
"Wear you some gloves.", '''https://shop.crafnation.com/product/wearyousomegloves'''
+
'''Links to member-recommended external sites:'''
 +
:'''[https://www.multiboard.io/ Multiboard]''' — "3D Printed Storage System"
 +
:'''[https://gridfinity.xyz/catalog/ Gridfinity]''' — The modular, open-source grid storage system for your workshop
 +
:'''[https://www.stlfinder.com/\ STLFinder]''' — search engine for free 3d models
 +
:'''[https://www.3dbenchy.com/ 3DBenchy]''' — 3D torture test (benchmark)
 +
:'''[https://www.exiii-hackberry.com/ HACKberry]''' — 3D-printable open source bionic arm
  
−
===[[QR Codes|Make QR Codes]]===
+
'''Links to member-recommended YouTube videos:'''
 +
:'''[https://www.youtube.com/channel/UCeIsImKtiNm7D_BxfG4n7zg/playlists "Things we've built"]''', including 3D-printed robotic hand (2015)
 +
:'''[https://www.youtube.com/watch?v=OzIGfcIyBnc Jay Leno on 3D scanning and 3D printing from 3D Systems]''' — (8 years ago)
  
−
===[[Lithophane Links]]===
+
==For Additional Help==
 +
:Use our PPM Slack channel #3d-printing for FDM or SLA printing questions.
 +
:[[How To Slack#PPM Channel Names and Descriptions|'''List of all PPM Slack channels''']]
 +
:Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the&nbsp;community.
 +
{{Template:Footer}}
 +
{{Template:Ideas into reality}}
 +
<p style="padding:0.2em 0.4em; background:#EE9F21; color:#FFFFFF; font-size:15%;"> &nbsp; </p>
 +
<!--Woodshop-->

Latest revision as of 18:10, 23 November 2024

Level 2 badge used at Pikes Peak Makerspace

The 3D Printing Area at Pikes Peak Makerspace (PPM) consists mostly of Level 2 equipment.

Additional PPM training is required to use any of our Level 2 equipment.

Additional PPM training and then PPM certification is required to use any of our Level 3 equipment.

Our trainers are passionate about sharing their knowledge and ensuring a positive learning experience for all.

We are grateful for their commitment and dedication to our community.

No reservations are required for any of our 3D Printers at this time, they are "first-come, first-served".

3D Printing Area hand tools should be marked with orange tape or paint.

Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.

 


Safety First

Members must know the following information:

In case of emergency, call 911.
Our physical location is:
735 East Pikes Peak Avenue
Colorado Springs, CO 80903
use this when ordering pizza or an ambulance
  • Emergency sign

    IN CASE OF
    EMERGENCY
    sign

PPM Fire Escape Plan

Fire Escape Plan maps are posted throughout the Makerspace.
There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.
  • PPM Emergency Evacuation Plan 040721

    PPM Emergency
    Evacuation Plan.pdf

  • PPM Fire Prevention Plan 0407022

    PPM Fire
    Prevention Plan.pdf

  • PPM Fire Escape Plan

    PPM Fire Escape
    Plan

First Aid

There is a FIRST AID Supply Cabinet in our Kitchen Area.
FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.
  • FIRST AID Supply Cabinet

    FIRST AID
    Supply Cabinet

  • FIRST AID kit

    FIRST AID
    Kit

Eye Wash Stations

Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.
  • EMERGENCY EYE & FACE WASH STATION

    Emergency
    Eye & Face Wash
    Station

Personal Protective Equipment (PPE)

Wear protective equipment in all Wood and Metal Shop Areas.
Wear gloves when using Isopropyl Alcohol and other cleaners.
  • SAFETY GOGGLES

    Personal Protective Equipment (PPE)

Hazardous Chemicals

All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.
Review the Safety Data Sheet (SDS) information of unknown products before use.
SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.
Do not bring dangerous chemicals to the makerspace.
Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.
Please DO NOT paint indoors.
  • flammables cabinet

    Flammables Cabinet
    in the Vented Room



Impairment

The use of PPM equipment requires you to be alert, attentive, and focused.
Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.



 

Classes

PPM announces its Upcoming events, including classes, on Meetup
To help out in the 3D Printing Area at PMM, use our #3d-printing channel on Slack.

Training

FDM vs SLA 3D Printing — according to the "new Bing"
"FDM and SLA are two different types of 3D printing technologies that use different materials and methods to create parts. FDM stands for fused deposition modeling, and SLA stands for stereolithography. Here are some of the main differences between them:
FDM uses a heated nozzle to extrude melted plastic filament one layer at a time on a build platform. SLA uses a UV laser to cure liquid resin one layer at a time in a resin tank.
FDM can print with a variety of thermoplastic materials, such as ABS, PLA, PETG, and nylon. SLA can print with different types of resin materials, such as standard, engineering, and dental resins.
FDM has more color options and similar strength in the X and Y directions than SLA. SLA has better surface finish, detail, and speed than FDM.
FDM is cheaper, more user-friendly, and more reliable than SLA. SLA is more expensive, requires more post-processing, and is more sensitive to environmental factors than FDM.
FDM is suitable for basic proof-of-concept models, quick and low-cost prototyping, and simple parts that might be machined. SLA is ideal for high-detail parts, molds, patterns, and functional parts that require tight tolerances and smooth surfaces."


Intro To 3D Printing — new class information from Josh Rafail
PRUSA KNOWLEDGE BASE
Prusa Material Table
Prusa 3D by Josef Prusa — YouTube channel
Ultimate 3D Printing Materials Guide — SIMPLYFY3D
44 Common 3D Print Problems — on 3dsourced.com
RepRap Glossary — common terms and abbreviations


Warn.png The following pages contain historical information. The pages are provided for reference only.

Introduction to 3D Printing

Equipment Lists

3D Printers

Item Manufacturer/
Model 		Build
Volume 		Upgrades Resources
3D Printer #1
Level 2 badge
 Prusa /

MK3S

250x210x200 mm (stock)
3D Printer #2
Level 2 badge
 Prusa /

MK3S

250x210x200 mm (stock)
3D Printer #3
Level 2 badge
 Prusa /

MK3S

E3D Revo Hotend

2 Fan Upgrade
Quick fit nozzle
Obsidian nozzle
Bed w/ PEI coating

Prusa Upgrades - E3D
3D Printer (MEDUSA)

Level 3 badge

Prusa /

MK3S

E3D Revo Hotend

2 fan upgrade
Quick fit nozzle
Brass nozzle
Bed w/ PEI coating

Prusa Upgrades - E3D

3D Printing Equipment — Level 1

Picture Item Manufacturer/
Model 		Resources
3Doodler create
 3Doodler create 3Doodler

STAR TREK

Getting Started
Dryer oven
 lab oven / dryer

with timer

(12"x12"x12" interior)

Curtin Matheson
IMPULSE SEALER new
 IMPULSE HEAT SEALER

12" w cutter

Midwest Pacific,

MP-12C

filament dryer box
 filament dryer box PPM
Fume Extractor
 Fume Extractor PACE

8888-0825

  • IMPULSE HEAT SEALER label

    IMPULSE SEALER label

3D Printing — Computers  

Item Application
Software 		System
Software 		Manufacturer/
Model 		CPU Memory/
Storage
laptop computer PrusaSlicer

Lychee Slicer

Repetier‑Server

Microsoft Windows 10 Dell

Hand Tools

  • INFRARED THERMOMETER

    INFRARED THERMOMETER

3D Printing Area hand tools should be marked with orange tape or paint.
Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Benefits

PPM members enjoy discounts at the following local merchants:
(bring proof of membership)
Company Website Benefit Directions to
Logo WOODCRAFT
 Woodcraft of Colorado Springs 10% discount    4438 Austin Bluffs Parkway
Logo CO Lumber
 CO Lumber Specialties 10% discount 3636 Stone Avenue
Logo General Air
 GENERAL AIR 10% discount 3031 N Nevada Ave.
Logo ACE
 ACE Hardware Uintah Gardens 10% discount 1830 W Uintah Street
Map of stores that provide PPM member discounts
Map of helpful local resources curated by our makers
At home LightBurn subscriptions can be purchased at a discounted rate for being a PPM member.
The discount code is saved as a Pinned Message in our 'laser-cutter' channel in Slack.

Policies

PPE

Donate for PPE
Or, leave donations in a black payment box, or use a QR code.

Red Tags

If equipment needs repairs, place a Red Tag on it and report it via the Pikes Peak Makerspace Slack channel #red-tags-issues
This advises others on the malfunctioning equipment and ensures that actions can be taken to service/repair the equipment.

Modeling Software

Autodesk Fusion — integrated, cloud-based CAD and CAM software
Blender — for creating 3D printed models (and much more)

Slicing Software

PrusaSlicer — prepare ("slice") 3D models for 3D printing

Member Showcase

  • 3D Printed camera slider

    camera slider
    by Trevor Banks

  • 3D Printed camera slider

    camera slider closeup
    by Trevor Banks

  • colorful Benchy 3D print

    colorful "Benchy"
    using Prusa MMU

  • Benchy 3D print

    "Benchy" 3D Printing
    benchmark test

  • 3D Printed Hairy Lion

    Hairy Lion
    3D Printing test

  • 3D printed Nikola Tesla bust

    Tesla bust
    8 inches tall

  • Toilet paper holder

    Stormtrooper
    Toilet paper holder

  • InMoov robot torso

    Open source
    InMoov robot
    by Kelly C.

  • exiii prosthetic/robotic hand

    Open source "HACKberry"
    prosthetic/robotic hand (exiii)
    by Tima Anankitpaiboon

  • HACKberry 3 hands

    Open source "HACKberry"
    prosthetic/robotic hands
    by Tima Anankitpaiboon

  • 3D Printing at the SUMMIT

    3D Printing record attempt
    at the SUMMIT of PIKES PEAK
    14,110 FT.

For even more member projects, visit our #showcase channel on Slack, or follow our social media links.

Related Pages

Links to related PPM Wiki pages:

  3D Printing — Resin (SLA)  
  3D Scanning  
  Computers — Windows  
  Raspberry Pi  
PrusaSlicer Tips
Autodesk Fusion Tips
Blender Tips
STL File Format Tips
QR Codes

Hand-Curated Links

Links to member-recommended external sites:

Multiboard — "3D Printed Storage System"
Gridfinity — The modular, open-source grid storage system for your workshop
STLFinder — search engine for free 3d models
3DBenchy — 3D torture test (benchmark)
HACKberry — 3D-printable open source bionic arm

Links to member-recommended YouTube videos:

"Things we've built", including 3D-printed robotic hand (2015)
Jay Leno on 3D scanning and 3D printing from 3D Systems — (8 years ago)

For Additional Help

Use our PPM Slack channel #3d-printing for FDM or SLA printing questions.
List of all PPM Slack channels
Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the community.

Search the PPM Wiki — include Content pages as well as Multimedia.

Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.

Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative processes by providing shared space, shared tools, materials, software, and a knowledge base to turn their ideas into reality.

 

Retrieved from "https://wiki.pikespeakmakerspace.org/index.php?title=3D_Printing&oldid=18017"