Difference between revisions of "Laser"

From Pikes Peak Makerspace Wiki
Jump to navigation Jump to search
(298 intermediate revisions by 2 users not shown)
Line 1: Line 1:
−
[[File:Level_3_badge.png|alt=|left|frameless|100x100px]]
+
[[File:Level 3 badge.png|alt=Level 3 badge used at Pikes Peak Makerspace|left|frameless|100x100px|PPM TRAINING & CERTIFICATION REQUIRED]]
  
−
'''The Laser Engraver/Cutter Area at Pikes Peak Makerspace (PPM) consists mostly of Level 3 equipment.'''  
+
'''Our Laser Engraver/Cutter Area at Pikes Peak Makerspace (PPM) consists mostly of Level 3 equipment.'''  
  
−
Additional training is required to use our Level 3 equipment.
+
Additional PPM training and then certification is required to use any of our Level 3 equipment.
  
−
<span style="color:#FFFFFF; background:#D81F2B">&nbsp;Laser Area&nbsp;</span> [[Laser#Hand Tools|hand tools]] should be marked with <span style="color:#D81F2B">'''red'''</span> tape or paint.
+
 
 +
'''[https://pikespeakmakerspace.org/reserve Zing Laser Check-in and Reservations]'''
 +
<br>
 
<br>
 
<br>
 +
{{Template:Contact Us}}
 +
 +
<p style="padding:0.2em 0.4em;  background:#D81F2B; color:#FFFFFF; font-size:15%;"> &nbsp; </p>
 
<br>
 
<br>
 
{{Template:Safety}}
 
{{Template:Safety}}
 +
<br>
 +
<p style="padding:0.2em 0.4em;  background:#D81F2B; color:#FFFFFF; font-size:15%;"> &nbsp; </p>
 +
==Classes and Training==
  
−
==Classes and Training==
+
===[[New Member Orientation]]===
  
−
===Area Captains===
+
===Area Contact===
−
:'''Robbie Cochran''' (Epilog Laser)
+
:'''Jonathan Wommack''' (Epilog Laser)
−
:'''Lisa MacNicol''' (BOSSLASER)
 
  
 
===Classes===
 
===Classes===
−
: Pikes Peak Makerspace announces its [https://www.meetup.com/pikespeakmakerspace/events '''Upcoming events, including classes, on Meetup''']
+
:The Zing Laser Certification class is offered on the 2nd Wednesday of each month. <br>
 +
:If this time or date does not work with your schedule, <br>
 +
:please contact us - https://pikespeakmakerspace.org/Contact. <br>
 +
:Some instructors offer one-on-one training that we can help schedule.
 +
 
 +
:PPM announces its [https://www.meetup.com/pikespeakmakerspace/events '''Upcoming events, including classes, on Meetup''']
  
 
===Training===
 
===Training===
−
:'''Robbie Cochran''' (Epilog Laser)
+
:'''Jonathan Wommack''' (Epilog Laser)
−
:'''Nicolas Ordahl''' (BOSSLASER)
+
<gallery widths="200" heights="125" >
 +
File:Zing Instruction Sheetv3.pdf|'''Zing Instruction Sheetv3.pdf'''
 +
</gallery>
 
<br>
 
<br>
−
:'''Watch these videos on LightBurn BEFORE (BOSSLASER) CLASS!'''
+
'''DO NOT cut materials with PVC on either laser,''' this will release chlorine gas which&nbsp;is&nbsp;toxic.
−
:[https://youtu.be/BkNeVjbZncc Lesson 1 First Time User]
+
:ALWAYS ensure the work area interior and exterior is clean before and after your&nbsp;work.
−
:[https://youtu.be/uzFsrUwONbw Lesson 2 LightBurn UI Walkthrough]
+
:The maximum bed size for vector cutting or raster etching is 16” x 12” or less.
−
:[https://youtu.be/nybhYtjElQU Lesson 3 Cut Settings]
+
 
−
:[https://youtu.be/al9pHi1dXlE LightBurn Basics #1 Importing, Selection, Grouping, Movement]
+
 
−
:[https://youtu.be/1fds7JdbiSo LightBurn Basics #2 Text and Offsetting]
+
===Events===
−
:[https://youtu.be/T6lQrcf2DtI LightBurn Basics # 3 Trace Image and Weld]
+
<gallery widths="200" heights="125" >
−
:
+
File:TOSC Epilog tour 2021-11-24.jpg|alt=TOSC Epilog tour 2021-11-24|'''TOSC tour at PPM<br>(2021-11-24)'''
−
:'''[https://www.youtube.com/watch?v=i5NpPInh5Z0&t=5s Pikes Peak Makerspace Boss Laser Intro] -- external link to PPM YouTube channel'''
+
File:Intro to Laser Cutting.jpeg|alt=Intro to Laser Cutting|'''Intro to Laser Cutting at the MAC<br>(January 15, 2015)'''
−
:ALWAYS ensure the work area interior and exterior is clean before and after your work.
 
−
<gallery>
 
−
File:Boss Laser Orientation class handout.pdf|alt=Boss Laser Orientation class handout|<center>'''Boss Laser Orientation class handout'''</center>
 
−
File:Hot keyguideV1 2.pdf|alt=LightBurn HotKey List|<center>'''LIGHTBURN<br>HotKey List'''</center>
 
 
</gallery>
 
</gallery>
  
−
 
−
===Tips===
 
−
:'''DO NOT cut materials with PVC on either laser,''' this will release chlorine gas which is toxic.
 
−
===For Help===
 
−
: Message in PPM Slack channel #laser-cutter
 
 
<br>
 
<br>
 
{{Template:Historical}}
 
{{Template:Historical}}
Line 50: Line 55:
  
 
'''&bull;''' [[Laser Cutting Acrylic‏‎]] (16:31, 24 November 2015)
 
'''&bull;''' [[Laser Cutting Acrylic‏‎]] (16:31, 24 November 2015)
−
 
  
 
==Equipment Lists==
 
==Equipment Lists==
  
−
===BOSSLASER===
+
===Zing LASER===
−
{| class="wikitable sortable"
+
{| class="wikitable"
−
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#D81F2B; color:#ffffff;"
+
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#D81F2B; color:#ffffff;"
−
| style="vertical-align:middle;" |'''Picture'''
+
| style="vertical-align:middle;" |Picture
−
|'''Item'''
+
|Item
−
|'''Manufacturer'''
+
|Manufacturer/<br>Model
−
|'''Model<br>Number'''
+
|Reference<br>Materials
−
|'''Estimated<br>Value'''
 
−
|'''Manual'''
 
−
|'''Owner'''
 
−
|'''Status'''
 
−
|'''Problem<br>Description'''
 
 
|-
 
|-
−
|[[File:BOSS LASER.jpg|alt=BOSS LASER engraver|center|frameless|200x200px]]
+
|[[File:Zing LASER.jpg|center|frameless|150x150px]]
−
|'''Boss 150 Watt'''  
+
|'''zing&nbsp;30&nbsp;Watt&nbsp;'''
−
'''CO<sub>2</sub> Laser'''
+
'''CO<sub>2</sub> Laser'''  
  
 +
'''Cutter/Engraver'''
 
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px]]
 
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px]]
−
|[https://www.bosslaser.com Boss]
+
|'''Epilog Laser'''
−
|[https://www.bosslaser.com/laser-machines/boss-hp-3655 LS-3655]
+
10000 Laser System
−
|<p style="text-align:right;">$20,000</p>
+
|yes, and [https://www.epiloglaser.com/assets/downloads/manuals/zing-manual-web.pdf online]
−
|[https://admin.bosslaser.com/assets/cfcc74b8-ec51-4445-9e87-bc4955308bec Operators Manual]
+
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
−
|PPM
+
| style="vertical-align:middle;" |
−
|working (12/28/21)
 
 
|
 
|
−
|-
 
−
|[[File:BOSS LASER OUTFEED TABLE.jpg|alt=BOSS LASER OUTFEED TABLE|center|frameless]]
 
−
|'''OUTFEED TABLE'''
 
−
|Mike Mike
 
 
|
 
|
 
|
 
|
−
|
+
|}
−
|PPM
+
 
−
|working (12/28/21)
+
===Zing LASER Computer===
−
|
+
{| class="wikitable"
 +
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#D81F2B; color:#ffffff;"
 +
|Item
 +
|Application<br>Software
 +
|Manufacturer/<br>Model
 +
|System<br>Software
 
|-
 
|-
−
|[[File:Industrial Chiller.jpg|alt=Industrial Chiller|center|frameless]]
+
|'''Computer,'''  
−
|'''Industrial Chiller'''
+
i7 3.4 GHz 
−
|S&A
+
|Adobe Acrobat, <br>
−
|CW&#8209;5000DG
+
Adobe Illustrator, <br>
−
|
+
Adobe Photoshop, <br>
−
|[https://wiki.ehlab.uk/_media/cw-5000_5200_industrial_chiller_maintenance_manual.pdf Maintenance Manual]
+
Inkscape, <br>
−
|PPM
+
CorelDRAW,  <br>
−
|working (12/28/21)
+
and more.
−
|
+
|hp
 +
|Microsoft Windows 10 Pro
 
|-
 
|-
−
|[[File:Compressor.jpg|alt=Compressor|center|frameless]]
 
−
|'''Compressor'''
 
−
|
 
 
|
 
|
 
|
 
|
 
|
 
|
−
| PPM
 
−
|being repaired
 
−
(01/22/22)
 
 
|
 
|
 
|-
 
|-
−
|[[File:BOSS LASER Computer.jpg|alt=BOSS LASER Computer|center|frameless]]
+
|'''Monitor'''
−
|'''Computer'''
+
20" widescreen
−
|HP
 
−
|h8-1117c
 
−
|<p style="text-align:right;">$250</p>
 
 
|
 
|
−
|PPM
+
|Asus
−
|working (12/28/21)
+
VH202
 
|
 
|
 
|-
 
|-
 +
|'''keyboard (01/22/23)'''
 
|
 
|
−
|'''27" Monitor'''
+
|Dell  
−
| Dell
 
−
|
 
−
|<p style="text-align:right;">$100</p>
 
−
|
 
−
|PPM
 
−
|working (12/28/21)
 
 
|
 
|
 
|-
 
|-
 
|
 
|
−
|'''rotary attachment for Boss&nbsp;Laser'''
 
 
|
 
|
 
|
 
|
 
|
 
|
−
|
 
−
|PPM
 
−
|?
 
−
|
 
−
|-
 
−
|'''Picture'''
 
−
|'''Item'''
 
−
|'''Manufacturer'''
 
−
|'''Model<br>Number'''
 
−
|'''Estimated<br>Value'''
 
−
|'''Manual'''
 
−
|'''Owner'''
 
−
|'''Status'''
 
−
|'''Problem<br>Description'''
 
 
|}
 
|}
−
 
+
:'''''Design workstation ONLY!'''''
−
 
+
:'''''No Facebook, social media, or random browsing.'''''
−
===Zing LASER===
 
−
{| class="wikitable sortable"
 
−
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#D81F2B; color:#ffffff;"
 
−
| style="vertical-align:middle;" |'''Picture'''
 
−
|'''Item'''
 
−
|'''Manufacturer'''
 
−
|'''Model<br>Number'''
 
−
|'''Estimated<br>Value'''
 
−
|'''Manual'''
 
−
|'''Owner'''
 
−
|'''Status'''
 
−
|'''Problem<br>Description'''
 
−
|-
 
−
|[[File:Zing LASER.jpg|center|frameless|200x200px]]
 
−
|'''Zing&nbsp;30&nbsp;Watt&nbsp;Laser'''
 
−
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px]]
 
−
|[https://www.epiloglaser.com/ Epilog Laser]
 
−
|10000 Laser System
 
−
|<p style="text-align:right;">$5,800</p>
 
−
|yes, and [https://www.epiloglaser.com/assets/downloads/manuals/zing-manual-web.pdf online]
 
−
|PPM
 
−
|working
 
−
|
 
−
|-
 
−
|
 
−
|'''Computer'''
 
−
|HP
 
−
|h8-1117c
 
−
|<p style="text-align:right;">$250</p>
 
−
|
 
−
|PPM
 
−
|working
 
−
|
 
−
|-
 
−
|
 
−
|'''20" Monitor'''
 
−
|Dell
 
−
|
 
−
|<p style="text-align:right;">$100</p>
 
−
|
 
−
|PPM
 
−
|working
 
−
|
 
−
|-
 
−
|'''Picture'''
 
−
|'''Item'''
 
−
|'''Manufacturer'''
 
−
|'''Model<br>Number'''
 
−
|'''Estimated<br>Value'''
 
−
|'''Manual'''
 
−
|'''Owner'''
 
−
|'''Status'''
 
−
|'''Problem<br>Description'''
 
−
|}
 
−
 
 
  
 
===Hand Tools===
 
===Hand Tools===
−
:<span style="color:#FFFFFF; background:#D81F2B">&nbsp;Laser Area&nbsp;</span> hand tools should be marked with <span style="color:#D81F2B">'''red'''</span> tape or paint.
+
:'''Laser Area''' hand tools should be marked with <span style="color:#D81F2B">'''red'''</span> tape or paint.
 
:Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.
 
:Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.
 +
===Equipment Reservations===
 +
*Reserve 24 Hours in Advance to Guarantee Equipment.
 +
*Unreserved equipment is first come first serve.
 +
*Reservations are given up after 15 minute no show.
 +
'''If you don't have a reservation:'''
 +
*'''Be sure your job does not run longer than an upcoming reservation or you are expected to stop your job.'''
 +
*'''[https://pikespeakmakerspace.org/reserve Use this form to sign in (No more paper)]'''
  
−
===[[Donations Received]]===
 
  
−
===[[Wish List#Laser|Wish List]]===
+
[[Donations Received|'''Donations Received''']]
  
 +
[[Wish List#Laser -- Epilog Zing|'''Wish List''']]
 +
:Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make.
 +
 +
==Benefits==
 +
{{Member Benefits}}
 
==Policies==
 
==Policies==
−
===[https://pikespeakmakerspace.org/reserve-equipment Equipment Reservations]===
+
'''Materials'''
−
===Materials===
 
 
:'''DO NOT cut materials with PVC on either laser,''' this will release chlorine gas which is toxic.
 
:'''DO NOT cut materials with PVC on either laser,''' this will release chlorine gas which is toxic.
 +
:'''Avoid reflective material.'''
 
:'''Donate for "Wood Sheet for Laser" via PayPal:  [https://bit.ly/ppmstuff bit.ly/ppmstuff]'''
 
:'''Donate for "Wood Sheet for Laser" via PayPal:  [https://bit.ly/ppmstuff bit.ly/ppmstuff]'''
−
:'''Or, leave donations in a black payment box, or use a QR code.'''
+
:'''''Or, leave donations in a black payment box, or use a QR code.'''''
−
:Help Us Keep Stocked Up!
 
  
−
{{Member Benefits}}
+
{{Red Tags}}
−
{{Scrap and Trash}}
 
  
−
==Software==
+
==Related Software==
  
 
===Design Software===
 
===Design Software===
−
:'''Adobe Illustrator''' (Windows 10 and Macintosh)
+
:'''[[Adobe Illustrator Tips]]'''
−
:'''Inkscape''' (cross platform)
+
:'''[[Adobe Photoshop Tips]]'''
−
:[https://procreate.art/ '''Procreate'''] (for Apple iPad)
+
:'''[[Inkscape Tips]]'''
 +
:'''[[Canva Tips]]'''
 +
:'''[[Procreate app Tips]]'''
 +
 
 
===Printing Software===
 
===Printing Software===
−
:[https://lightburnsoftware.com/ '''LightBurn'''] (for BOSSLASER)
+
:'''Adobe Acrobat'''
−
:'''Adobe Acrobat''' (for Epilog LASER)
 
−
 
 
−
==Showcase==
 
  
−
===Boss Laser Photo Gallery===
+
==Member Showcase==
−
<gallery>
+
<gallery widths="200" heights="125">
−
File:Laser engraved panels.jpg|alt=Laser engraved panels|<center>'''Laser engraved panels<br>(by Mike Mike)'''</center>
+
File:Laserable Leatherette.JPG|'''Laserable Leatherette<br>by Debbie l Urquijo<br>(03/19/24)'''
−
File:Wall art princess bride.jpg|alt=princess bride wall art|<center>'''princess bride<br>minimalist wall art<br>(by Ben Severson)'''</center>
+
File:Engraved photo.png|alt=Engraved photo by Chris Stevens|'''Engraved photo<br>by Chris Stevens<br>(09/09/22)'''
−
File:Wall art INGLOURIOUS BASTERDS.jpg|alt=INGLOURIOUS BASTERDS wall art|<center>'''INGLOURIOUS BASTERDS<br>minimalist wall art<br>(by Ben Severson)'''</center>
+
File:Red-cover.jpg|alt=Engraved journal cover by Marvin Harrell|'''Engraved journal cover<br>by Marvin Harrell<br>(05/09/22)'''
−
File:IRON GIANT 1.jpg|alt=THE IRON GIANT 14"x24" minimalist wall art|<center>'''THE IRON GIANT<br>minimalist wall art<br> 14"x24"'''</center>
+
File:Round PCB PPM clock.jpg|alt=Round PCB PPM clock|'''Round PCB<br>PPM clock'''
−
File:IRON GIANT 2.jpg|alt=THE IRON GIANT 14"x24" minimalist wall art|<center>'''THE IRON GIANT<br>(by Ben Severson)'''</center>
+
File:PPM engraved PCB keychain.jpg|alt=PPM engraved PCB keychain|'''PPM engraved<br>PCB keychain'''
−
File:IRON GIANT 3.jpg|alt=THE IRON GIANT 14"x24" minimalist wall art|<center>'''THE IRON GIANT<br>(by Ben Severson)'''</center>
+
File:Minnesota Nice.jpg|alt=Minnesota NICE|'''Minnesota NICE<br>(May 29, 2015)'''  
−
File:TOSC tour 2021-11-24.jpg|alt=TOSC tour 2021-11-24|<center>'''TOSC tour<br>2021-11-24'''</center>
 
 
</gallery>
 
</gallery>
 +
{{Template:Showcase_blurb}}
  
 +
==Related Pages==
 +
Links to related PPM Wiki pages:
 +
:[[Laser_--_BOSS|<span style="color:#FFFFFF; background:#D81F2B">&nbsp;&nbsp;'''Laser — BOSS'''&nbsp;&nbsp;</span>]]
 +
:[[CNC|<span style="color:#FFFFFF; background:#2B78BE">&nbsp;&nbsp;'''CNC Router Table'''&nbsp;&nbsp;</span>]]
  
−
===Epilog Laser Photo Gallery===
+
==Hand-Curated Links==
−
<gallery>
+
Links to member-recommended external sites:
−
File:TOSC Epilog tour 2021-11-24.jpg|alt=TOSC Epilog tour 2021-11-24|<center>'''TOSC tour<br>2021-11-24'''</center>
+
:'''[https://www.imag-r.com/ ImagR]''' — Prepare your image for laser engraving
−
File:Laser cut wooden clock.jpg|alt=Laser cut wooden clock|<center>'''Laser cut<br>wooden clock<br>(Trevor Banks)'''</center>
+
:'''[https://www.makercase.com/ MakerCase]''' or '''[https://hackaday.io/project/10649-boxespy Boxes.py]''' — Cut boxes with a laser cutter
−
File:Round PCB PPM clock.jpg|alt=Round PCB PPM clock|<center>'''Round PCB<br>PPM clock'''</center>
+
:'''[https://www.timefracture.org/laser.html Homebrew CO<sub>2</sub> Laser Page]''' — by John Doran (Epilog VP of Engineering)
−
File:PPM engraved PCB keychain.jpg|alt=PPM engraved PCB keychain|<center>'''PPM engraved PCB keychain'''</center>
+
:[https://www.bell-laser.com/laser-list '''Bell Laser'''] — After market parts for laser machines
−
File:Engraved wooden keychains.jpg|alt=3" engraved wooden keychains|<center>'''3" engraved wooden keychains'''</center>
+
:[https://laserresearch.net/product-category/economy-line/ '''Laser Research Optics'''] — Alternative and cheaper sources of lenses
−
File:PPM Library sign.jpg|alt=PPM Library engraved metal sign|<center>'''PPM Library<br>engraved metal sign'''</center>
 
−
File:Light switch cover.JPG|alt=Light switch cover|<center>'''Light switch cover<br>Manitou Art Center'''</center>
 
−
File:Minnesota Nice.jpg|alt=Minnesota NICE|<center>'''Minnesota NICE<br>Manitou Art Center<br>(May 29, 2015)'''</center>
 
−
File:Intro to Laser Cutting.jpeg|alt=Intro to Laser Cutting|<center>'''Intro to Laser Cutting<br>Manitou Art Center<br>(January 15, 2015)'''</center>
 
−
</gallery>
 
  
−
===PPM YouTube Channel===
+
==For Additional Help==
−
:'''[https://www.youtube.com/channel/UCeIsImKtiNm7D_BxfG4n7zg/featured "featured" videos],''' (the YouTube "HOME" tab)
+
:Use the PPM Slack channel #laser-cutter
−
:[https://www.youtube.com/channel/UCeIsImKtiNm7D_BxfG4n7zg/playlists '''"Things we've built'''"], Created playlists, including 3D-printed robotic hand (2015)
+
:[[How To Slack#PPM Channel Names and Descriptions|'''List of all PPM Slack channels''']]
 +
:Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the&nbsp;community.
 +
{{Template:Footer}}
 +
{{Template:Ideas into reality}}
 +
<p style="padding:0.2em 0.4em;  background:#D81F2B; color:#FFFFFF; font-size:15%;"> &nbsp; </p>
  
−
==Other Fun Stuff==
+
<!--Woodshop-->
−
 
 
−
===[[wikipedia:Ambigram|What is an ambigram?]]===
 
−
===[https://procreate.art/ipad/superpowers Procreate superpowers]===
 
−
<br>
 
−
<hr>
 
−
{{Template:Footer}}
 

Revision as of 18:57, 12 May 2024

Level 3 badge used at Pikes Peak Makerspace

Our Laser Engraver/Cutter Area at Pikes Peak Makerspace (PPM) consists mostly of Level 3 equipment.

Additional PPM training and then certification is required to use any of our Level 3 equipment.


Zing Laser Check-in and Reservations

Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.

 


Safety First

Members must know the following information:

In case of emergency, call 911.
Our physical location is:
735 East Pikes Peak Avenue
Colorado Springs, CO 80903
use this when ordering pizza or an ambulance
  • Emergency sign

    IN CASE OF
    EMERGENCY
    sign

PPM Fire Escape Plan

Fire Escape Plan maps are posted throughout the Makerspace.
There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.
  • PPM Emergency Evacuation Plan 040721

    PPM Emergency
    Evacuation Plan.pdf

  • PPM Fire Prevention Plan 0407022

    PPM Fire
    Prevention Plan.pdf

  • PPM Fire Escape Plan

    PPM Fire Escape
    Plan

First Aid

There is a FIRST AID Supply Cabinet in our Kitchen Area.
FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.
  • FIRST AID Supply Cabinet

    FIRST AID
    Supply Cabinet

  • FIRST AID kit

    FIRST AID
    Kit

Eye Wash Stations

Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.
  • EMERGENCY EYE & FACE WASH STATION

    Emergency
    Eye & Face Wash
    Station

Personal Protective Equipment (PPE)

Wear protective equipment in all Wood and Metal Shop Areas.
Wear gloves when using Isopropyl Alcohol and other cleaners.
  • SAFETY GOGGLES

    Personal Protective Equipment (PPE)

Hazardous Chemicals

All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.
Review the Safety Data Sheet (SDS) information of unknown products before use.
SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.
Do not bring dangerous chemicals to the makerspace.
Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.
Please DO NOT paint indoors.
  • flammables cabinet

    Flammables Cabinet
    in the Vented Room



Impairment

The use of PPM equipment requires you to be alert, attentive, and focused.
Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.


 

Classes and Training

New Member Orientation

Area Contact

Jonathan Wommack (Epilog Laser)

Classes

The Zing Laser Certification class is offered on the 2nd Wednesday of each month.
If this time or date does not work with your schedule,
please contact us - https://pikespeakmakerspace.org/Contact.
Some instructors offer one-on-one training that we can help schedule.
PPM announces its Upcoming events, including classes, on Meetup

Training

Jonathan Wommack (Epilog Laser)

  • Zing Instruction Sheetv3.pdf


DO NOT cut materials with PVC on either laser, this will release chlorine gas which is toxic.

ALWAYS ensure the work area interior and exterior is clean before and after your work.
The maximum bed size for vector cutting or raster etching is 16” x 12” or less.


Events

  • TOSC Epilog tour 2021-11-24

    TOSC tour at PPM
    (2021-11-24)

  • Intro to Laser Cutting

    Intro to Laser Cutting at the MAC
    (January 15, 2015)



Warn.png The following pages contain historical information. The pages are provided for reference only.

• Introduction to the Zing Laser‏‎ (15:26, 20 May 2015)

• Laser Cutting Material Table‏‎ (15:41, 21 May 2015)

• Laser Cutting Acrylic‏‎ (16:31, 24 November 2015)

Equipment Lists

Zing LASER

Picture Item Manufacturer/
Model 		Reference
Materials
Zing LASER.jpg
 zing 30 Watt 

CO2 Laser

Cutter/Engraver

Level 3 badge
 Epilog Laser

10000 Laser System

yes, and online

Zing LASER Computer

Item Application
Software 		Manufacturer/
Model 		System
Software
Computer,

i7 3.4 GHz

Adobe Acrobat,

Adobe Illustrator,
Adobe Photoshop,
Inkscape,
CorelDRAW,
and more.

hp Microsoft Windows 10 Pro
Monitor

20" widescreen

Asus

VH202

keyboard (01/22/23) Dell
Design workstation ONLY!
No Facebook, social media, or random browsing.

Hand Tools

Laser Area hand tools should be marked with red tape or paint.
Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Equipment Reservations

  • Reserve 24 Hours in Advance to Guarantee Equipment.
  • Unreserved equipment is first come first serve.
  • Reservations are given up after 15 minute no show.

If you don't have a reservation:


Donations Received

Wish List

Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make.

Benefits

PPM members enjoy discounts at the following local merchants:
(bring proof of membership)
Company Website Benefit Directions to
Logo WOODCRAFT
 Woodcraft of Colorado Springs 10% discount    4438 Austin Bluffs Parkway
Logo CO Lumber
 CO Lumber Specialties 10% discount 3636 Stone Avenue
Logo General Air
 GENERAL AIR 10% discount 3031 N Nevada Ave.
Logo ACE
 ACE Hardware Uintah Gardens 10% discount 1830 W Uintah Street
Map of stores that provide PPM member discounts
Map of helpful local resources curated by our makers
At home LightBurn subscriptions can be purchased at a discounted rate for being a PPM member.
The discount code is saved as a Pinned Message in our 'laser-cutter' channel in Slack.

Policies

Materials

DO NOT cut materials with PVC on either laser, this will release chlorine gas which is toxic.
Avoid reflective material.
Donate for "Wood Sheet for Laser" via PayPal: bit.ly/ppmstuff
Or, leave donations in a black payment box, or use a QR code.

Red Tags

If equipment needs repairs, place a Red Tag on it and report it via the Pikes Peak Makerspace Slack channel #red-tags-issues
This advises others on the malfunctioning equipment and ensures that actions can be taken to service/repair the equipment.

Related Software

Design Software

Adobe Illustrator Tips
Adobe Photoshop Tips
Inkscape Tips
Canva Tips
Procreate app Tips

Printing Software

Adobe Acrobat

Member Showcase

  • Laserable Leatherette
    by Debbie l Urquijo
    (03/19/24)

  • Engraved photo by Chris Stevens

    Engraved photo
    by Chris Stevens
    (09/09/22)

  • Engraved journal cover by Marvin Harrell

    Engraved journal cover
    by Marvin Harrell
    (05/09/22)

  • Round PCB PPM clock

    Round PCB
    PPM clock

  • PPM engraved PCB keychain

    PPM engraved
    PCB keychain

  • Minnesota NICE

    Minnesota NICE
    (May 29, 2015)

For even more member projects, visit our #showcase channel on Slack, or follow our social media links.

Related Pages

Links to related PPM Wiki pages:

  Laser — BOSS  
  CNC Router Table  

Hand-Curated Links

Links to member-recommended external sites:

ImagR — Prepare your image for laser engraving
MakerCase or Boxes.py — Cut boxes with a laser cutter
Homebrew CO2 Laser Page — by John Doran (Epilog VP of Engineering)
Bell Laser — After market parts for laser machines
Laser Research Optics — Alternative and cheaper sources of lenses

For Additional Help

Use the PPM Slack channel #laser-cutter
List of all PPM Slack channels
Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the community.

Search the PPM Wiki — include Content pages as well as Multimedia.

Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.

Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative processes by providing shared space, shared tools, materials, software, and a knowledge base to turn their ideas into reality.

 


Retrieved from "https://wiki.pikespeakmakerspace.org/index.php?title=Laser&oldid=15645"