Area Captain Duties
3D Printing
| Maintenance and consumables | Week 1 | Week 2 | Week 3 | Week 4 |
|---|---|---|---|---|
| check all printers are working properly | ||||
| calibrate first layer | ||||
| z rod calibration | ||||
| bed leveling | ||||
| lube bearings | ||||
| check print bed condition | ||||
| make sure server is working properly | ||||
| clean out models on server | ||||
| clean out scrap trays | ||||
| check and fill isopropyl bottles | ||||
| check filament inventory | ||||
| check resin inventory | ||||
| check all bolts are tight |
Jump to 3D Printing page
CNC
| Maintenance and consumables | Week 1 | Week 2 | Week 3 | Week 4 |
|---|---|---|---|---|
| check and empty dust collection bin | ||||
| empty trash can | ||||
| check y axis is square | ||||
| check z axis is square | ||||
| grease bearings | ||||
| grease z ball screw | ||||
| blowout dust from electronics | ||||
| resurface spoilboard | ||||
| check/ restock tape | ||||
| check/ restock / order CA glue and activator | ||||
| check all bolts are tight | ||||
| check/ flush VFD water (every 6 months) | ||||
| bolt check |
Jump to CNC page
Computers
| Maintenance and consumables | Week 1 | Week 2 | Week 3 | Week 4 |
|---|---|---|---|---|
| update software |
Jump to Computers page
Printers
| Maintenance and consumables | Week 1 | Week 2 | Week 3 | Week 4 |
|---|---|---|---|---|
| check printer ink | ||||
| check printer toner |
Jump to Printers page
Laser
| Maintenance and consumables | Week 1 | Week 2 | Week 3 | Week 4 |
|---|---|---|---|---|
| Zing clean out tray | ||||
| Zing clean optics | ||||
| Zing check/ tighten belts | ||||
| Zing check/ restock wood | ||||
| Zing clean bed |
Jump to Laser page
Laser -- BOSS
| Maintenance and consumables | Week 1 | Week 2 | Week 3 | Week 4 |
|---|---|---|---|---|
| Boss clean mirrors | ||||
| Boss clean linear rails | ||||
| Boss change water in chiller | ||||
| Boss clean lens | ||||
| Boss clean gantry and worm rods | ||||
| Boss check belts | ||||
| Boss check bolts | ||||
| Boss clean tray | ||||
| Boss clean honeycomb | ||||
| Boss clean knives | ||||
| Boss clean glass |
Jump to Laser -- BOSS page
Metal Shop
| Maintenance and consumables | Week 1 | Week 2 | Week 3 | Week 4 |
|---|---|---|---|---|
| check welder gas, wire,and tips | ||||
| check bandsaw blades | ||||
| check chopsaw blades | ||||
| check grinding wheels | ||||
| check oxy acetylene gas | ||||
| clean out trash cans | ||||
| check for broken tools |
Jump to Metal Shop page
Wood Shop
| Maintenance and consumables | Week 1 | Week 2 | Week 3 | Week 4 |
|---|---|---|---|---|
| check and empty dust collection bins | ||||
| empty trash cans | ||||
| check/ clean saw blades | ||||
| check/ square table saw fence | ||||
| check dust collection for clogs | ||||
| check/ clean dust collection filters | ||||
| check/ empty dust collection bags | ||||
| check/ restock // order sandpaper | ||||
| check/ restock // order sand wood glue | ||||
| check for broken tools | ||||
| check planer is square | ||||
| check jointer is square | ||||
| check belt sander belts | ||||
| check miter saw is square | ||||
| check/ empty festool vacuum bag | ||||
| check planer blades | ||||
| check jointer blades |
Jump to Wood Shop page