Difference between revisions of "Welding Area"

Revision as of 20:16, 8 May 2022

The Welding Area at Pikes Peak Makerspace (PPM) consists mostly of Level 2 equipment.

Additional training is required to use our Level 2 equipment.

Welding Area hand tools should be marked with pink tape or paint or powder coating.

Safety First

Members must know the following information:

In case of emergency, call 911.

Our physical location is:

735 East Pikes Peak Avenue

Colorado Springs, CO 80903

use this when ordering pizza or an ambulance

IN CASE OF
EMERGENCY
sign

PPM Fire Escape Plan

Fire Escape Plan maps are posted throughout the Makerspace.

There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.

PPM Emergency
Evacuation Plan.pdf
PPM Fire
Prevention Plan.pdf
PPM Fire Escape
Plan

First Aid

There is a FIRST AID Supply Cabinet in our Kitchen Area.

FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.

FIRST AID
Supply Cabinet
FIRST AID
Kit

Eye Wash Stations

Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.

Emergency
Eye & Face Wash
Station

Personal Protective Equipment (PPE)

Wear protective equipment in all Wood and Metal Shop Areas.

Wear gloves when using Isopropyl Alcohol and other cleaners.

Personal Protective Equipment (PPE)

Hazardous Chemicals

All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.

Review the Safety Data Sheet (SDS) information of unknown products before use.

SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.

Do not bring dangerous chemicals to the makerspace.

Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.

Please DO NOT paint indoors.

Flammables Cabinet
in the Vented Room

Impairment

The use of PPM equipment requires you to be alert, attentive, and focused.

Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.

Classes and Training

New Member Orientation

Area Captain -- Trevor Banks

View all PPM Area Captains

Area Captain Duties

To help out in the Welding Area, contact the Area Captain on Slack.

Classes

Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup

Training

Learn to weld for $50 at General Air

For Additional Help

Use the PPM Slack channel #metal-shop

The following pages contain historical information. The pages are provided for reference only.

Intro to Welding.pdf

Equipment Lists

Welding Equipment

Picture	Item	Manufacturer	ModelNumber	EstimatedValue	Manual	Owner	Status	ProblemDescription
	Welder, MIG, TIG and stick	Esab	multimaster 260			PPM (donated by Qualtek Manufacturing)	Working
	Fume Extractor	PACE	8888-0825	?	none	PPM	?
	box fan, 20", 3-speed	LASKO	N/A	$30	N/A	PPM	FULLY FUNCTIONING
	metal table, 2' x 8’ 40” tall	N/A	N/A	?	N/A	PPM (donated by Bristol)	FULLY FUNCTIONING
	HEAVY DUTY CUTTING & WELDING KIT	FIREPOWER	OXYFUEL 350	$399.99	N/A	PPM	FULLY FUNCTIONING
	TORCH CART	N/A	N/A	$129.99	N/A	PPM	FULLY FUNCTIONING
	ACETYLENE CYLINDER	N/A	10 CF	$149.99	N/A	PPM	FULLY FUNCTIONING
	OXYGEN CYLINDER	N/A	20 CF	$199.99	N/A	PPM	FULLY FUNCTIONING
	Titanium 45A plasma cutter			$929.99	N/A	PPM	FULLY FUNCTIONING
Picture	Item	Manufacturer	ModelNumber	EstimatedValue	Manual	Owner	Status	ProblemDescription

Welding curtain
Metal Shop side
Welding curtain
Wood Shop side

Hand Tools

Picture	Item	Manufacturer	ModelNumber	EstimatedValue	Manual	Owner	Status	ProblemDescription
	BESSEY CORNER METAL CLAMP	BESSEY	WSM-9	$228.99	N/A	PPM	FULLY FUNCTIONING
	WELDING CLAMP/PLIERS	HOBART	770115	$9.39	N/A	PPM	FULLY FUNCTIONING
	LOCKING C CLAMP	IRWIN	9SP	$14.99	N/A	PPM	FULLY FUNCTIONING
	WELDING HELPER PLIERS	EASTWOOD	081806A	$18.99	N/A	PPM	FULLY FUNCTIONING
	LOCKER	N/A	N/A	$750	N/A	PPM	FULLY FUNCTIONING
	ACE LOCK	ACE HARDWARE	CODE 1551	$18.99	ON LINE	PPM	FULLY FUNCTIONING
	ADJUSTABLE WRENCH	FULLER		$17.99	N/A	PPM	FULLY FUNCTIONING
Picture	Item	Manufacturer	ModelNumber	EstimatedValue	Manual	Owner	Status	ProblemDescription

Welding Area hand tools should be marked with pink tape or paint.

Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Donations Received

Wish List

Benefits and Policies

PPM members enjoy discounts at the following local merchants:

(bring proof of membership)


Company	Website	Benefit	Directions to
	Woodcraft of Colorado Springs	10% discount	4438 Austin Bluffs Parkway
	CO Lumber Specialties	10% discount	3636 Stone Avenue
	GENERAL AIR	10% discount	3031 N Nevada Ave.
	ACE Hardware Uintah Gardens	10% discount	1830 W Uintah Street

Map of stores that provide PPM member discounts

Map of helpful local resources curated by our makers

At home LightBurn subscriptions can be purchased at a discounted rate for being a PPM member.

The discount code is saved as a Pinned Message in our 'laser-cutter' channel in Slack.

Equipment Reservations

Materials

Donate for "General Supplies" via PayPal: bit.ly/ppmstuff

Or, leave donations in a black payment box, or use a QR code.

Red Tags and Reporting Issues

Scrap and Trash

Trash day is MONDAY

Recycling day is MONDAY (96 gallon tote)

Single Stream Recycling provided by Waste Connections. Paper, cardboard, cans, glass, and one time use plastics.

Empty recycling and trash into our dumpster at the back (south side) of the building.

Always leave the space better than you found it.

Software

Fusion 360

Curated Links

ESAB Knowledge Center

Other Fun Stuff

Search the PPM Wiki — include Content pages as well as Multimedia.

Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.

@@ Line 5: / Line 5: @@
 <span style="color:#FFFFFF; background:#EB4F9C">&nbsp;Welding Area&nbsp;</span> [https://wiki.pikespeakmakerspace.org/index.php/Metal_Shop#Hand_Tools hand tools] should be marked with <span style="color:#EB4F9C">'''pink'''</span> tape or paint or powder coating.
+<br>
+<br>
 {{Template:Safety}}
@@ Line 18: / Line 19: @@
 ===Training===
 :[https://store.generalair.com/courses/colorado-springs/ Learn to weld for $50 at General Air]
-===For Additional Help===
+===For Additional Help ===
 :Use the PPM Slack channel #metal-shop
 {{Template:Historical}}
@@ Line 24: / Line 25: @@
 File:Intro to Welding PDF.pdf|alt=Intro to Welding.pdf|<center>Intro to Welding.pdf</center>
 </gallery>
-==Equipment Lists==
+== Equipment Lists==
-===Welding Equipment ===
+===Welding Equipment===
 {| class="wikitable sortable"
 |- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#EB4F9C; color:#ffffff;"
@@ Line 108: / Line 109: @@
 |'''ACETYLENE CYLINDER'''
 |N/A
-|10 CF
+| 10 CF
 |<p style="text-align:right;">$149.99</p>
 |N/A
@@ Line 118: / Line 119: @@
 |'''OXYGEN CYLINDER'''
 |N/A
-|20 CF
+| 20 CF
 |<p style="text-align:right;">$199.99</p>
 |N/A
@@ Line 149: / Line 150: @@
 File:Welding curtain 2.jpg|alt=Welding curtain|<center>Welding curtain<br>Wood Shop side</center>
 </gallery>
-===Hand Tools ===
+===Hand Tools===
 {| class="wikitable sortable"
 |- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#EB4F9C; color:#ffffff;"
@@ Line 165: / Line 166: @@
 |'''BESSEY CORNER METAL CLAMP'''
 |BESSEY
-|WSM-9
+| WSM-9
 |<p style="text-align:right;">$228.99</p>
 |N/A
@@ Line 262: / Line 263: @@
 ==Curated Links==
 :[https://www.esabna.com/us/en/education/index.cfm '''ESAB Knowledge Center''']
-==Other Fun Stuff==
+== Other Fun Stuff==
 :
 <hr>