Difference between revisions of "CNC"

From Pikes Peak Makerspace Wiki
Jump to navigation Jump to search
 
(177 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
[[File:Level_3_badge.png|alt=Level 3 badge|left|frameless|100x100px]]
+
[[File:Level 3 badge.png|alt=Level 3 badge used at Pikes Peak Makerspace|left|frameless|100x100px|PPM TRAINING & CERTIFICATION REQUIRED]]
  
−
'''The CNC Area at Pikes Peak Makerspace (PPM) consists mostly of Level 3 equipment.'''
+
'''At Pikes Peak Makerspace (PPM), our CNC room is 234 square feet (13'x18').'''
  
−
Additional training and certification is required to use any of our Level 3 equipment.
+
The CNC Area at PPM consists mostly of Level 3 equipment.
  
−
<span style="color:#FFFFFF; background:#2B78BE">&nbsp;CNC Area&nbsp;</span> [[CNC#Hand Tools|hand tools]] should be marked with <span style="color:#2B78BE">'''blue'''</span> tape or paint.
+
Additional PPM training and then PPM certification is required to use any of our Level 3 equipment.
 +
<br>
 +
<br>
 +
Our trainers are passionate about sharing their knowledge and ensuring a positive learning experience for&nbsp;all.
 +
 
 +
We are grateful for their commitment and dedication to our community.
  
 +
CNC Area hand tools should be marked with <span style="color:#2B78BE">'''blue'''</span> tape or paint.
  
−
Our CNC room is 234 square feet (13'x18'). It is '''a small but important part of the 5,500 square foot building that we lease.'''
+
'''[https://pikespeakmakerspace.org/reserve CNC Check-in and Reservation]'''
 +
<br>
 
<br>
 
<br>
 +
{{Template:Contact Us}}
 +
 +
<p style="padding:0.2em 0.4em;  background:#2B78BE; color:#FFFFFF; font-size:15%;"> &nbsp; </p>
 
<br>
 
<br>
−
[[File:CNC Area.jpg|alt=CNC Area|thumb|300x300px|<span style="color:#FFFFFF; background:#2B78BE">&nbsp;CNC Area&nbsp;&nbsp;(03/15/22)&nbsp;<br><br></span>]]
 
 
{{Template:Safety}}
 
{{Template:Safety}}
 +
<br>
 +
<p style="padding:0.2em 0.4em;  background:#2B78BE; color:#FFFFFF; font-size:15%;"> &nbsp; </p>
  
−
==Classes and Training==
+
==Classes==
−
 
+
:PPM announces its [https://www.meetup.com/pikespeakmakerspace/events '''Upcoming events, including classes, on Meetup''']
−
===[[New Member Orientation]]===
+
:To help out in the CNC Area contact us on Slack
  
−
===Area Captain -- Trevor Banks===
+
==Training==
−
:[[Area Captain Duties#CNC|'''Area Captain Duties''']]
+
☐ Check, and empty, the dust collection barrel before and after each use.
−
::To help out in the CNC Area, contact the Area Captain on Slack.
 
  
−
===Classes===
+
'''Links to external sites:'''
−
:Pikes Peak Makerspace announces its  [https://www.meetup.com/pikespeakmakerspace/events '''Upcoming events, including classes, on Meetup''']
+
:'''[https://www.avidcnc.com/support/instructions/software/downloads/documentation/ Mach4 Documentation]''' — (6) PDF files
−
===Training===
+
:[https://www.precisebits.com/reference/glossary.htm '''Glossary'''] — from PreciseBits (Palmer Lake, Colorado)
−
Links to other sites (external links):
+
:[https://www.youtube.com/c/AvidCNC/playlists '''Avid CNC Playlists'''] — on YouTube
−
:'''[https://handibot.com/ Handibot]''' -- smart power tool
+
:[https://www.cnccookbook.com/g-wizard-cnc-speeds-and-feeds-calculator/ '''G-Wizard, CNC Speeds and Feeds Calculator''']
−
:[https://docs.google.com/document/d/14J23HPfQ99lgIvZXp89AtvGRvSQFEfqUR9xPNU9O4cA/edit#heading=h.cm2jvhhse2sz '''Intro to Roland MDX-15''']
 
−
 
 
−
===Events===
 
−
<gallery>
 
−
File:TOSC tours CNC Area.jpg|alt=TOSC tours CNC Area|<center>TOSC tours CNC Area<br>(2021-11-24)</center>
 
−
File:CNC Area 2021-11-24.jpg|alt=CNC Area 2021-11-24|<center>CNC Area<br>(2021-11-24)</center>
 
−
File:CNC Class Nov 2017.jpg|alt=CNC Class November 18, 2017|<center>CNC Class<br>(November 18, 2017)</center>
 
−
File:Downtown-CS-check.jpg|alt=Grant check|<center>Grant check presentation<br>(July 30, 2016)</center>   
 
−
</gallery>
 
−
 
 
−
===For Additional Help ===
 
−
:Use the PPM Slack channel #cnc-machine
 
  
 
==Equipment Lists==
 
==Equipment Lists==
−
 
+
===PPM Equipment List===
−
=== PPM Equipment List===
+
{| class="wikitable"
−
{| class="wikitable sortable"
 
 
|+
 
|+
  
−
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#2B78BE; color:#ffffff;"
+
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#2B78BE; color:#ffffff;"
−
| style="vertical-align:middle;" |'''Picture'''
+
|Item
−
|'''Item'''
+
|Manufacturer
−
|'''Manufacturer'''
+
| Model
−
|'''Model<br>Number'''
+
|Resources
−
|'''Manual'''
+
|Owner
−
|'''Estimated<br>Value'''
 
−
|'''Owner'''
 
 
|-
 
|-
−
|
 
 
|'''CNC router parts&nbsp;pro'''<br>
 
|'''CNC router parts&nbsp;pro'''<br>
−
[[File:Level 3 badge.png|left|frameless|55x55px]]
+
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|55x55px]]
 
|Avid CNC
 
|Avid CNC
 
|
 
|
−
|yes
+
|[https://www.avidcnc.com/pro4896-4-x-8-cnc-router-kit-p-253.html 4' x 8' CNC Router Kit]
−
|<p style="text-align:right;">$7,000</p>
+
|'''PPM'''
−
|PPM
 
 
|-
 
|-
 
|
 
|
 +
|
 +
|
 +
|
 +
|
 +
|-
 +
|'''handibot'''<br>
 +
[[File:Level_2_badge.png|alt=Level 2 badge|left|frameless|55x55px]]
 +
|ShopBot Tools, Inc.
 +
|handibot
 +
|[https://handibot.com/ Handibot]
 +
 +
[https://www.shopbottools.com/training/ Training Material]
 +
|'''PPM'''
 +
|-
 
|'''Roland CNC'''<br>
 
|'''Roland CNC'''<br>
−
[[File:Level_2_badge.png|left|frameless|55x55px]]
+
[[File:Level_2_badge.png|alt=Level 2 badge|left|frameless|55x55px]]
−
|[https://www.rolanddga.com/ Roland]
+
|Roland
 
|Modela  
 
|Modela  
 
MDX-15
 
MDX-15
 
|[https://www.rolanddga.com/support/products/milling/modela-mdx-15-3d-milling-machine Roland Technical Support]
 
|[https://www.rolanddga.com/support/products/milling/modela-mdx-15-3d-milling-machine Roland Technical Support]
 +
 +
[https://docs.google.com/document/d/14J23HPfQ99lgIvZXp89AtvGRvSQFEfqUR9xPNU9O4cA/edit#heading=h.cm2jvhhse2sz Intro to Roland MDX-15]
 +
|'''PPM'''
 +
|- style="font-weight:bold; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
 +
|
 
|
 
|
−
|PPM
 
−
|-
 
 
|
 
|
−
|'''handibot'''<br>
 
−
[[File:Level_2_badge.png|left|frameless|55x55px]]
 
−
|ShopBot
 
 
|
 
|
−
|?
 
 
|
 
|
−
|PPM [https://wiki.pikespeakmakerspace.org/index.php/Donations_Received#2020_Donations (Donated by David&nbsp;Hsu)]
 
−
|-
 
−
|<center>'''Picture'''</center>
 
−
|<center>'''Item'''</center>
 
−
|<center>'''Manufacturer'''</center>
 
−
|<center>'''Model<br>Number'''</center>
 
−
|<center>'''Manual'''</center>
 
−
|<center>'''Estimated<br>Value'''</center>
 
−
|<center>'''Owner'''</center>
 
 
|}
 
|}
  
−
=== CNC Room Computer===
+
===CNC Room Computer===
−
{| class="wikitable sortable"
+
{| class="wikitable"
−
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#2B78BE; color:#ffffff;"
+
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#2B78BE; color:#ffffff;"
−
| style="vertical-align:middle;" |'''Picture'''
+
|Item
−
|'''Item'''
+
|Application<br>Software
−
|'''Manufacturer'''
+
|System<br>Software
−
|'''Model<br>Number'''
+
|Manufacturer
−
|'''System<br>Software'''
+
|Model
−
|'''Application<br>Software'''
+
|Network&nbsp;Speed,<br>Wired
−
|'''Network<br>Speed,<br>Wired'''
 
−
|'''Estimated<br>Value'''
 
−
|'''Owner'''
 
 
|-
 
|-
 +
|'''computer'''
 +
|Autodesk Fusion, Mach4, Mach 3,
 +
VCarve Pro - Makerspace Edition 12
 +
|Microsoft Windows 10
 +
|
 
|
 
|
−
|'''PC'''
+
|
 +
|-
 
|
 
|
 
|
 
|
Line 113: Line 113:
 
|
 
|
 
|
 
|
−
|PPM
 
 
|-
 
|-
 +
|'''monitor'''
 
|
 
|
−
|'''monitor'''
 
 
|
 
|
 
|
 
|
 
|
 
|
 
|
 
|
 +
|-
 +
|'''wired mouse'''
 
|
 
|
 
|
 
|
−
|PPM
 
−
|-
 
 
|
 
|
−
|'''wired mouse'''
 
 
|
 
|
 
|
 
|
 +
|-
 +
|'''wireless keyboard'''
 
|
 
|
 
|
 
|
 
|
 
|
 
|
 
|
−
|PPM
 
−
|-
 
 
|
 
|
−
|'''wireless keyboard'''
+
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
 
|
 
|
 
|
 
|
Line 143: Line 141:
 
|
 
|
 
|
 
|
−
|PPM
 
−
|-
 
−
|<center>'''Picture'''</center>
 
−
|<center>'''Item'''</center>
 
−
|<center>'''Manufacturer'''</center>
 
−
|<center>'''Model<br>Number'''</center>
 
−
|<center>'''System<br>Software'''</center>
 
−
|<center>'''Application<br>Software'''</center>
 
−
|<center>'''Network<br>Speed,<br>Wired'''</center>
 
−
|<center>'''Estimated<br>Value'''</center>
 
−
|<center>'''Owner'''</center>
 
 
|}
 
|}
−
 
  
 
===CNC Equipment List===
 
===CNC Equipment List===
−
{| class="wikitable sortable"
+
{| class="wikitable"
 
|+
 
|+
  
−
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#2B78BE; color:#ffffff;"
+
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#2B78BE; color:#ffffff;"
−
| style="vertical-align:middle;" |'''Picture'''
+
| style="vertical-align:middle;" | Picture
−
|'''Item'''
+
|Item
−
|'''Manufacturer'''
+
|Manufacturer
−
|'''Model<br>Number'''
+
|Model
−
|'''Manual'''
+
|Resources
−
|'''Estimated<br>Value'''
+
|Owner
−
|'''Owner'''
 
 
|-
 
|-
 +
|[[File:Handibot.jpg|alt=handibot engraver|center|frameless|150x150px]]
 +
|'''handibot'''
 +
|ShopBot Tools, Inc.
 +
|handibot
 +
|[https://www.shopbottools.com/training/ Training Material]
 +
|'''John Norton'''
 +
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
 +
| style="vertical-align:middle;" |
 +
|
 
|
 
|
−
|<br>'''CNC shark'''<br><br>
 
−
|Nextwave Automation
 
 
|
 
|
 
|
 
|
−
|<p style="text-align:right;">$3,500</p>
 
−
|'''Drew Johnson'''
 
−
|-
 
−
|[[File:Handibot.jpg|alt=handibot engraver|center|frameless|150x150px]]
 
−
|'''handibot'''
 
−
|ShopBot
 
 
|
 
|
−
|?
 
−
|<p style="text-align:right;">$2,000</p>
 
−
|'''John Norton'''
 
−
|-
 
−
|<center>'''Picture'''</center>
 
−
|<center>'''Item'''</center>
 
−
|<center>'''Manufacturer'''</center>
 
−
|<center>'''Model<br>Number'''</center>
 
−
|<center>'''Manual'''</center>
 
−
|<center>'''Estimated<br>Value'''</center>
 
−
|<center>'''Owner'''</center>
 
 
|}
 
|}
−
 
  
 
===Hand Tools===
 
===Hand Tools===
−
:<span style="color:#FFFFFF; background:#2B78BE">&nbsp;CNC Area&nbsp;</span> hand tools should be marked with <span style="color:#2B78BE">'''blue'''</span> tape or paint.
+
:'''CNC Area''' hand tools should be marked with <span style="color:#2B78BE">'''blue'''</span> tape or paint.
 
:Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.
 
:Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.
−
:Measurement Tools
 
  
−
===[[Donations Received]]===
+
===Equipment Reservations===
−
===[[Wish List#CNC|Wish List]]===
+
*Reserve 24 Hours in Advance to Guarantee Equipment.
−
:Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make.
+
*Unreserved equipment is first come first serve.
 +
*Reservations are given up after 15 minute no show.
 +
*'''[https://pikespeakmakerspace.org/reserve Use this form to sign in (No more paper)]'''
 +
 
 +
'''If you don't have a reservation:'''
 +
 
 +
*'''Be sure your job does not run longer than an upcoming reservation or you are expected to stop your job.'''
  
−
==Benefits and Policies==
+
==Benefits==
 
{{Member Benefits}}
 
{{Member Benefits}}
−
===[https://pikespeakmakerspace.org/reserve Equipment Reservations]===
 
  
−
===Materials===
+
==Policies==
 +
'''Materials'''
 
:'''Donate for "General Supplies" via PayPal:  [https://bit.ly/ppmstuff bit.ly/ppmstuff]'''
 
:'''Donate for "General Supplies" via PayPal:  [https://bit.ly/ppmstuff bit.ly/ppmstuff]'''
−
:'''Or, leave donations in a black payment box, or use a QR code.'''
+
:'''''Or, leave donations in a black payment box, or use a QR code.'''''
  
−
===[[New Member Orientation#Red Tags|Red Tags]]===
+
{{Red Tags}}
  
−
{{Scrap and Trash}}
+
==Member Showcase==
 +
<gallery widths="200" heights="125">
 +
File:2020ram-mh.jpg|alt=subwoofer box|'''subwoofer box cut on CNC<br> <i>by Trevor Banks</i>'''
 +
File:Ram-mh.jpg|alt=subwoofer box|'''subwoofer box cut on CNC<br> <i>by Trevor Banks</i>'''
 +
File:Catch all tray.jpg|alt=wooden catch all tray|'''Walnut catch all tray<br> <i>by Henry D.</i>'''
 +
File:Chair glue-up.jpg|alt=Early CNC project by Bob P.|'''Early CNC project<br>finished chair<br> <i>by Bob P.</i>'''
 +
File:Chair Bob Parsons.jpg|alt=Early CNC project by Bob P.|'''Early CNC project<br> <i>by Bob P.<br>(June 2017)</i>'''
 +
File:Downtown-CS-check.jpg|alt=Grant check|'''DOWNTOWN COLORADO SPRINGS<br>grant check presentation<br><i>(July 30, 2016)</i>'''
 +
</gallery>
  
−
==Software==
+
{{Template:Showcase_blurb}}
−
Links to other PPM Wiki pages (internal links):
+
 
−
:[[Autodesk Fusion 360 Tips|'''Fusion 360''']]
+
==Related Pages==
−
:[[Mach 4 Tips|'''Mach 4''']]
+
'''Links to related PPM Wiki pages:'''
−
:[[VCarve Tips|'''VCarve''']]
+
 
 +
:[[Wood_Shop|<span style="color:#FFFFFF; background:#3DA942">&nbsp;&nbsp;'''Wood Shop'''&nbsp;&nbsp;</span>]]
  
−
== Member Showcase ==
+
:[[Metal_Shop|<span style="color:#FFFFFF; background:#EB4F9C">&nbsp;&nbsp;'''Metal Shop'''&nbsp;&nbsp;</span>]]
−
<gallery>
+
 
−
File:2020ram-mh.jpg|alt=subwoofer box|<center>subwoofer box<br>cut on CNC<br>by Trevor Banks</center>
+
:[[Shed|<span style="color:#FFFFFF; background:#766FAF">&nbsp;&nbsp;'''Shed'''&nbsp;&nbsp;</span>]]
−
File:Ram-mh.jpg|alt=subwoofer box|<center>subwoofer box<br>cut on CNC<br>by Trevor Banks</center>
 
−
File:Catch all tray.jpg|alt=wooden catch all tray|<center>Walnut<br>catch all tray<br>by Henry D.</center>
 
−
File:Monarch CDC.jpg|alt=Monarch CDC|<center>Monarch CDC<br>sign<br>by Michael H.</center>
 
−
File:Chair glue-up.jpg|alt=Early CNC projectby Bob P.|<center>Early CNC project<br>finished chair<br>by Bob P.</center>
 
−
File:Chair Bob Parsons.jpg|alt=Early CNC projectby Bob P.|<center>Early CNC project<br>by Bob P.</center> 
 
−
</gallery>
 
  
−
{{Template:Showcase_blurb}}
+
:[[Vented_Room|<span style="color:#FFFFFF; background:#0F99D7">&nbsp;&nbsp;'''Vented Room'''&nbsp;&nbsp;</span>]] - '''[https://pikespeakmakerspace.org/reserve make a reservation]'''
  
−
==See Also==
+
:'''[[Mach4 Tips]]'''
−
Links to other PPM Wiki pages (internal links):
+
:'''[[Autodesk Fusion Tips]]'''
−
:[[Wood Shop|'''Wood Shop''']]
+
:'''[[VCarve Tips]]'''
−
:'''[[Shed]]'''
 
  
−
==Curated Links==
+
==Hand-Curated Links==
−
Links to other sites (external links):
+
'''Links to member-recommended external sites:'''
−
:[https://www.precisebits.com/ '''PreciseBits'''] -- Specialty Tools, Tutorials, Support
+
:'''[https://www.precisebits.com/ PreciseBits]''' — "emphasis on precision and reliability"
−
:[https://www.avidcnc.com/pro4896-4-x-8-cnc-router-kit-p-253.html '''4' x 8' CNC Router Kit''']
+
:'''[https://touchterrain.geol.iastate.edu/main TouchTerrain]''' — Easily Create 3D-Printable Terrain Models
 +
:'''[https://linuxcnc.org/ LinuxCNC]''' — control CNC machines, milling machines, lathes, 3D printers...
 +
:'''[https://littlemachineshop.com/info/business_resources.php?ID=1343147249&CAT=1 Little Machine Shop]''' — Resource Information
 +
:'''[https://www.youtube.com/watch?v=dY8v0j6uEJc Frank makes]''' — CNC Router Parts build on YouTube
  
−
==Other Fun Stuff==
+
==For Additional Help==
−
Links to other sites (external links):
+
:For additional help, use the PPM Slack channel #cnc-machines
−
:[https://www.lua.org/start.html '''Lua Programming Language -- Getting started''']
+
:[[How To Slack#PPM Channel Names and Descriptions|'''List of all PPM Slack channels''']]
−
:'''[https://www.youtube.com/watch?v=dY8v0j6uEJc Frank makes] -- CNC Build on YouTube'''
+
:Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the&nbsp;community.
−
<br>
 
−
<hr>
 
 
{{Template:Footer}}
 
{{Template:Footer}}
 +
{{Template:Ideas into reality}}
 +
<p style="padding:0.2em 0.4em;  background:#2B78BE; color:#FFFFFF; font-size:15%;"> &nbsp; </p>
 
<!--Woodshop-->
 
<!--Woodshop-->

Latest revision as of 11:50, 21 November 2024

Level 3 badge used at Pikes Peak Makerspace

At Pikes Peak Makerspace (PPM), our CNC room is 234 square feet (13'x18').

The CNC Area at PPM consists mostly of Level 3 equipment.

Additional PPM training and then PPM certification is required to use any of our Level 3 equipment.

Our trainers are passionate about sharing their knowledge and ensuring a positive learning experience for all.

We are grateful for their commitment and dedication to our community.

CNC Area hand tools should be marked with blue tape or paint.

CNC Check-in and Reservation

Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.

 


Safety First

Members must know the following information:

In case of emergency, call 911.
Our physical location is:
735 East Pikes Peak Avenue
Colorado Springs, CO 80903
use this when ordering pizza or an ambulance
  • Emergency sign

    IN CASE OF
    EMERGENCY
    sign

PPM Fire Escape Plan

Fire Escape Plan maps are posted throughout the Makerspace.
There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.
  • PPM Emergency Evacuation Plan 040721

    PPM Emergency
    Evacuation Plan.pdf

  • PPM Fire Prevention Plan 0407022

    PPM Fire
    Prevention Plan.pdf

  • PPM Fire Escape Plan

    PPM Fire Escape
    Plan

First Aid

There is a FIRST AID Supply Cabinet in our Kitchen Area.
FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.
  • FIRST AID Supply Cabinet

    FIRST AID
    Supply Cabinet

  • FIRST AID kit

    FIRST AID
    Kit

Eye Wash Stations

Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.
  • EMERGENCY EYE & FACE WASH STATION

    Emergency
    Eye & Face Wash
    Station

Personal Protective Equipment (PPE)

Wear protective equipment in all Wood and Metal Shop Areas.
Wear gloves when using Isopropyl Alcohol and other cleaners.
  • SAFETY GOGGLES

    Personal Protective Equipment (PPE)

Hazardous Chemicals

All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.
Review the Safety Data Sheet (SDS) information of unknown products before use.
SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.
Do not bring dangerous chemicals to the makerspace.
Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.
Please DO NOT paint indoors.
  • flammables cabinet

    Flammables Cabinet
    in the Vented Room



Impairment

The use of PPM equipment requires you to be alert, attentive, and focused.
Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.


 

Classes

PPM announces its Upcoming events, including classes, on Meetup
To help out in the CNC Area contact us on Slack

Training

☐ Check, and empty, the dust collection barrel before and after each use.

Links to external sites:

Mach4 Documentation — (6) PDF files
Glossary — from PreciseBits (Palmer Lake, Colorado)
Avid CNC Playlists — on YouTube
G-Wizard, CNC Speeds and Feeds Calculator

Equipment Lists

PPM Equipment List

Item Manufacturer Model Resources Owner
CNC router parts pro
Level 3 badge
 Avid CNC 4' x 8' CNC Router Kit PPM
handibot
Level 2 badge
 ShopBot Tools, Inc. handibot Handibot

Training Material

PPM
Roland CNC
Level 2 badge
 Roland Modela

MDX-15

Roland Technical Support

Intro to Roland MDX-15

PPM

CNC Room Computer

Item Application
Software 		System
Software 		Manufacturer Model Network Speed,
Wired
computer Autodesk Fusion, Mach4, Mach 3,

VCarve Pro - Makerspace Edition 12

Microsoft Windows 10
monitor
wired mouse
wireless keyboard

CNC Equipment List

Picture Item Manufacturer Model Resources Owner
handibot engraver
 handibot ShopBot Tools, Inc. handibot Training Material John Norton

Hand Tools

CNC Area hand tools should be marked with blue tape or paint.
Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Equipment Reservations

If you don't have a reservation:

  • Be sure your job does not run longer than an upcoming reservation or you are expected to stop your job.

Benefits

PPM members enjoy discounts at the following local merchants:
(bring proof of membership)
Company Website Benefit Directions to
Logo WOODCRAFT
 Woodcraft of Colorado Springs 10% discount    4438 Austin Bluffs Parkway
Logo CO Lumber
 CO Lumber Specialties 10% discount 3636 Stone Avenue
Logo General Air
 GENERAL AIR 10% discount 3031 N Nevada Ave.
Logo ACE
 ACE Hardware Uintah Gardens 10% discount 1830 W Uintah Street
Map of stores that provide PPM member discounts
Map of helpful local resources curated by our makers
At home LightBurn subscriptions can be purchased at a discounted rate for being a PPM member.
The discount code is saved as a Pinned Message in our 'laser-cutter' channel in Slack.

Policies

Materials

Donate for "General Supplies" via PayPal: bit.ly/ppmstuff
Or, leave donations in a black payment box, or use a QR code.

Red Tags

If equipment needs repairs, place a Red Tag on it and report it via the Pikes Peak Makerspace Slack channel #red-tags-issues
This advises others on the malfunctioning equipment and ensures that actions can be taken to service/repair the equipment.

Member Showcase

  • subwoofer box

    subwoofer box cut on CNC
    by Trevor Banks

  • subwoofer box

    subwoofer box cut on CNC
    by Trevor Banks

  • wooden catch all tray

    Walnut catch all tray
    by Henry D.

  • Early CNC project by Bob P.

    Early CNC project
    finished chair
    by Bob P.

  • Early CNC project by Bob P.

    Early CNC project
    by Bob P.
    (June 2017)

  • Grant check

    DOWNTOWN COLORADO SPRINGS
    grant check presentation
    (July 30, 2016)

For even more member projects, visit our #showcase channel on Slack, or follow our social media links.

Related Pages

Links to related PPM Wiki pages:

  Wood Shop  
  Metal Shop  
  Shed  
  Vented Room   - make a reservation
Mach4 Tips
Autodesk Fusion Tips
VCarve Tips

Hand-Curated Links

Links to member-recommended external sites:

PreciseBits — "emphasis on precision and reliability"
TouchTerrain — Easily Create 3D-Printable Terrain Models
LinuxCNC — control CNC machines, milling machines, lathes, 3D printers...
Little Machine Shop — Resource Information
Frank makes — CNC Router Parts build on YouTube

For Additional Help

For additional help, use the PPM Slack channel #cnc-machines
List of all PPM Slack channels
Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the community.

Search the PPM Wiki — include Content pages as well as Multimedia.

Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.

Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative processes by providing shared space, shared tools, materials, software, and a knowledge base to turn their ideas into reality.

 

Retrieved from "https://wiki.pikespeakmakerspace.org/index.php?title=CNC&oldid=17952"