Wood Shop

The Wood Shop Area at Pikes Peak Makerspace (PPM) consists of

both Level 2  and Level 3 equipment.

Additional training and certification is required to use any of our Level 3 equipment.

 Wood Shop Area  hand tools should be marked with green tape or paint or powder coating.

 Wood Shop Area  (03/15/22) 

Safety First

Members must know the following information:

In case of emergency, call 911.

Our physical location is:

735 East Pikes Peak Avenue

Colorado Springs, CO 80903

use this when ordering pizza or an ambulance

• 

  IN CASE OF
  EMERGENCY
  sign

PPM Fire Escape Plan

Fire Escape Plan maps are posted throughout the Makerspace.

There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.

• 

  PPM Emergency
  Evacuation Plan.pdf

• 

  PPM Fire
  Prevention Plan.pdf

• 

  PPM Fire Escape
  Plan

First Aid

There is a FIRST AID Supply Cabinet in our Kitchen Area.

FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.

• 

  FIRST AID
  Supply Cabinet

• 

  FIRST AID
  Kit

Eye Wash Stations

Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.

• 

  Emergency
  Eye & Face Wash
  Station

Personal Protective Equipment (PPE)

Wear protective equipment in all Wood and Metal Shop Areas.

Wear gloves when using Isopropyl Alcohol and other cleaners.

• 

  Personal Protective Equipment (PPE)

Hazardous Chemicals

All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.

Review the Safety Data Sheet (SDS) information of unknown products before use.

SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.

Do not bring dangerous chemicals to the makerspace.

Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.

Please DO NOT paint indoors.

• 

  Flammables Cabinet

Classes and Training

Area Captains -- Volunteers needed

Dust Deputy -- Vincent Flowers

Woodshop Configuration Captain -- Vincent Flowers

Lathe Captain -- Lucas Weismann

Table Saw Captain -- Bri Pomerantz

Sanding Station Captain -- Volunteers needed

Bandsaw Captain -- Jeff Rossmanith

Area Captain Duties

To help out in the Wood Shop Area, contact any of the Area Leaders on Slack.

View all PPM Area Captains

Classes

Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup

Training

Check-in/ Check-out REQUIRED (use the QR Code)

• Remember to always use the hand held metal detector, especially when using a SawStop.
• Let the tool do the work. Don't force it.

Tips

Links to other sites (external links):

Fine Wood Working Magazine Shop Tips

For Additional Help

Use the PPM Slack channel #wood-shop

The following pages contain historical information. The pages are provided for reference only.

• Introduction to Woodworking‏‎ (14:45, 15 November 2015)

• Woodworking terminology‏‎

Equipment Lists

POWERMATIC Equipment List

Picture	Item	Training Video Link	Manufacturer	Model Number	Power Requirements	Manual	Estimated Value	Owner	Status
	6" Belt/ 12" Disc Combination Sander			POWERMATIC 30B	3-phase	Replacement Parts		PPM	Not yet installed (01/19/23), (500 lbs)
	planer, 15", 4" Dust Port			POWERMATIC 15HH	Single Phase, 230V, 60Hz, 15A	Operating Instructions and Parts Manual (2017)	$4,000	PPM	Up and Operational (01/08/22)
	lathe, 18" extension, swing away tail stock, ONEWAY bowl chuck			POWERMATIC 3520B	Single Phase, 220V, 60Hz	POWERMATIC whitepaper	$7,000	PPM (donated by  Jim Kueck)	Up and Operational (03/27/22)
	14" bandsaw, rip and cross-cut fences, 5" riser			POWERMATIC PWBS‑14	Single Phase, 115V, 60Hz, 11A	Operating Instructions and Parts Manual	$900	PPM (donated by  Jim Kueck)
150x150px	table saw, 2 hp, 48" Beisemeyer fence			POWERMATIC PM66	3-phase	no	$1,500	PPM (donated by  Jim Kueck)
Picture	Item	Training Video Link	Manufacturer	Model Number	Power Requirements	Manual	Estimated Value	Owner	Status

Sharpening and Sanding Equipment List

Picture	Item	Manufacturer	Model Number	Manual	Estimated Value	Owner
	8" bench grinder on pedestal, blue and white grinding stones, Wolverine and Veritas sharpening devices, buffing wheel and compounds	JET	JWBG‑8		$500	PPM (donated by David Wasmer, Sr.)
	variable speed buffer and buffing wheels		DeWALT DWP849		$200	PPM (donated by David Wasmer, Sr.)
	3M sanding belts, disks and sheets				$100	PPM (donated by David Wasmer, Sr.)
	precision ground granite block, 12"x18"x3"	?	?		$200	PPM (donated by David Wasmer, Sr.)
Picture	Item	Manufacturer	Model Number	Manual	Estimated Value	Owner

Do not store tools, or anything, on our granite block to avoid damage to its surface.

Wood Shop Equipment List

Picture	Item	Manufacturer	Model Number	Power Requirements	Manual	Estimated Value	Owner
	8" Jointer with Shelix cutting head installed	JET	JJ-8CS	single phase, 110 Volts, 15 Amps, 60HZ		$1,000	PPM
	AIR FILTRATION SYSTEM with remote	BAILEIGH	AFS-2400	single phase, 110 Volts, 14 Amps, 60HZ	OPERATOR'S MANUAL	($1,853 new)	PPM (donated by TITAN ROBOTICS) Installed 04/07/22
	Oscillating Edge Belt / Spindle Sander	RIDGID	EB4424 0	single phase, 110 Volts, 6 Amps, 60HZ	Manual	$250	On loan from Wentworth Aggregates LLC
	12" Sliding Compound Miter Saw, dust hood & RIGID vacuum		DeWALT DW708	single phase, 110 Volts, 13 Amps, 60HZ		$350	Les
	wood tool sharpener	WORK SHARP	WS3000	single phase, 110 Volts, 2 Amps, 60HZ		$200	John Norton
	Router and Shaper with bits on rolling carts	DELTA	?	single phase, 110 Volts, 9 Amps, 60HZ		?	PPM
	24" 2-speed fan in rolling frame	UTILITECH PRO	?			?	PPM
	Box fan, 20", 3-speed	LASKO	N/A			$30	PPM
	6" Disk 4" Belt Sander	WEN	6502T	single phase, 110 Volts, 4.3 Amps, 60HZ		$120	PPM
	1" x 30" belt & 5" disk sander	Dremel	?	single phase, 110 Volts, 3 Amps, 60HZ		$75	PPM
	Free standing dust collector & vacuum	Dust Deputy & Craftsmen	?			$150	PPM
	Dust Collector 1.5HP 6" inlet	DELTA	?			$550	PPM
	Floor drill press	PORTER-CABLE	?	single phase, 110 Volts, 8 Amps, 60HZ		$500	PPM
	Mobile Base, Adjustable Universal	HTC	HTC2000	N/A	yes, and online	$80	PPM (donated by  Jim Kueck)
150x150px	overarm table saw blade guard and dust collector	SOMMERVILLE DESIGN	EXCALIBUR	N/A	no	$150	PPM
Picture	Item	Manufacturer	Model Number	Power Requirements	Manual	Estimated Value	Owner

• 

  Cable Management
  by Nick Hopkins
  (11/06/22)
• 

  Sanding station
  with RIGID vacuum
  (04/26/22)
• Table saw tall fence jig.jpg

  Table Saw
  tall fence jig
  front
• 

  Table saw
  tall fence jig
  back with clamps
• Emergency Stop Switch.jpg

  Table Saw
  Emergency Stop
  switch cover
• 

  AFS-2400
  nameplate
• 

  3520B POWERMATIC lathe
• 

  Lathe chuck
• 

  Lathe tools
• 

  Bench grinder
• 

  POWERMATIC
  bandsaw
• 

  POWERMATIC
  bandsaw
• 

  POWERMATIC
  table saw
• 

  PM 66
  nameplate
• Powermatic 66 Inspection tag.jpg

  Powermatic 66 Inspection tag
• 

  JET Jointer
  nameplate

FESTOOL Equipment List -- Level 3 Tools

Picture	Item	Manufacturer	Model Number	Estimated Value	Owner	Status
	Track Saw		TS 55 EQ	$550	John Norton	Working
	Sander (Half Sheet)		RS 2-E-Plus	$350	John Norton	Working
	Sander (Orbital)		ETS 150/5 EQ-Plus	$350	John Norton	Working
	Dust Collector		CLEANTEC CT 22 E	$600	John Norton	Working
	Multifunction Table		1080	$760	John Norton	Working
Picture	Item	Manufacturer	Model Number	Estimated Value	Owner	Status

• 

  FESTOOL
  Track Saw,
  in Systainer
• 

  FESTOOL
  Orbital Sander,
  in Systainer
• 

  FESTOOL
  Half Sheet Sander,
  in Systainer

Power Tools

'A Tool Is Just An Opportunity With A Handle' ~Kevin Kelly

Picture	Item	Manufacturer	Model Number	Manual	Estimated Value	Owner
	COMPACT ROUTER M18 FUEL		Milwaukee 2723-20	link	$200	PPM, New 01/01/23
	JIG SAW M18 FUEL D-Handle		Milwaukee 2737-20	link	$200	PPM, New 12/17/22
	Circular Saw, 185mm		Makita 5007NB			PPM (donated by David Wasmer, Sr.)
	Router		Makita 3601B			PPM (donated by David Wasmer, Sr.)
	RECIPROCATING SAW		DeWALT DW304P		$100	Greg C. (?)
	JIG SAW		DeWALT DW331		$150	John Norton
	Jig Saw	BOSCH	1590EVS			PPM
	AIR NAILER/ STAPLER	CENTRAL PNEUMATIC	64269		$30	PPM, New, (12/14/21)
	Biscuit Joiner	Craftsman			$130	PPM (donated by John Norton)
	Circular Saw	Craftsman			$50	PPM
	Belt Sander (handheld)	Craftsman			$50	PPM
	Belt Sander (handheld)		RYOBI			???
	Orbital Sander	PORTER-CABLE	Quicksand			PPM
	Mouse Sander/ Polisher		BLACK&DECKER FMS50		$25	PPM
Picture	Item	Manufacturer	Model Number	Manual	Estimated Value	Owner

Clamps

Item	Manufacturer		Quantity	Price Each	Owner
6" Wooden Handscrew Clamps	ROCKLER	Wooden Handscrew Clamps	2	$14	PPM
8" Quick Clamp	Irwin	Quick Grip	2	$10	PPM
12" Quick Clamp	Irwin	Quick Grip	2	$12	PPM
36" Quick Clamp	Irwin	Quick Grip	1	$36	Bill Epperson
30" Bessey Pipe Bar Clamp	Bessey		4	$20	Bill Epperson
48" Bessey Pipe Bar Clamp	Bessey		2	$20	Bill Epperson
60" Bessey Pipe Bar Clamp	Bessey		2	$20	Bill Epperson
36" Quick Release Steel Bar Clamp	Jorgensen	CABINENT MASTER 8036	5	$50	PPM
6" Quick Release Bar Clamp	PITTSBURGH		2	$3	Bill Epperson
12" Quick Release Bar Clamp	PITTSBURGH		0		PPM
18" Quick Release Bar Clamp	PITTSBURGH		0		PPM
24" Quick Release Bar Clamp	PITTSBURGH		2	$6	PPM
30" Quick Release Bar Clamp	PITTSBURGH		0		PPM
36" Quick Release Bar Clamp	PITTSBURGH	ITEM 60539	6	$9	PPM (donated by David Wasmer, Sr.)
60" Quick Release Bar Clamp	PITTSBURGH	ITEM 60673	2	$18	PPM
50" CLAMP & CUT EDGE GUIDE	PITTSBURGH	ITEM 66581	1	$20	PPM
6" Ratcheting Bar Clamp	PITTSBURGH		0		PPM
12" Ratcheting Bar Clamp	PITTSBURGH		6	$4	PPM
24" Ratcheting Bar Clamp	PITTSBURGH		0		PPM
Item	Manufacturer		Quantity	Price Each	Owner

Hand Tools

Picture	Item	Manufacturer	Model Number	Estimated Value	Owner
	10 Million Dollar Stick	FastCap		$20	PPM
	HAND HELD METAL DETECTOR	EASYVIEW TECHNOLOGY	GC-101H	$20	PPM
	Forstner bit set (16 bits)			?	PPM (donated by Mike Mike)
Picture	Item	Manufacturer	Model Number	Estimated Value	Owner

 Wood Shop Area  hand tools should be marked with green tape or paint or powder coating.

Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Wish List

A SawStop table saw (delivered 02/05/23!)

Benefits and Policies

PPM members enjoy discounts at the following local merchants:

(walk in, show proof of membership)

Company	Website	Benefit	Directions to
	Woodcraft of Colorado Springs	10% discount	4438 Austin Bluffs Parkway
	CO Lumber Specialties	10% discount	3636 Stone Avenue
	GENERAL AIR	10% discount	3031 N Nevada Ave.
	ACE Hardware Uintah Gardens	10% discount	1830 W Uintah Street

Map of stores that provide PPM member discounts

Map of helpful local resources curated by our makers

At home LightBurn subscriptions can be purchased at a discounted rate for being a PPM member.

The discount code is saved as a Pinned Message in our 'laser-cutter' channel in Slack.

Materials

Donate for "Sheet Goods" via PayPal: bit.ly/ppmstuff

Or, leave donations in a black payment box, or use a QR code.

Red Tags

Scrap and Trash

Trash day is MONDAY

Recycling day is MONDAY (96 gallon tote)

Single Stream Recycling provided by Waste Connections. Paper, cardboard, cans, glass, and one time use plastics.

Empty recycling and trash into our dumpster at the back (south side) of the building.

Always leave the space better than you found it.

Software

Links to other PPM Wiki pages (internal links):

Fusion 360

VCarve

Inkscape

Member Showcase

• 

  Wooden boxes
  by Jack K.
• 

  Miniature wooden wheelbarrow
  by Mike K.
• 

  Squirrel feeding
• 

  Squirrel Feeder
  by Mike K.
• 

  Tea Candle Holders
  by Mike K.

For even more member projects, visit our #showcase channel on Slack, or follow our social media links.

See Also

Links to other PPM Wiki pages (internal links):

Wood Shop -- SawStop

CNC Area

Metal Shop

Shed

Curated Links

Links to other sites (external links):

LibraryThing -- Our wood working-related books

Other Fun Stuff

Links to other sites (external links):

Vintage Machinery Photo Index -- POWERMATIC

Stumpy Nubs Woodworking Journal - YouTube

Inkscape Tutorial, For Engineers And Shaper Origin Users

Welding for Woodworkers

---

PPM Tool Color Map — Interactive

Search the PPM Wiki — include both Content pages and Multimedia

Contact Us if you cannot find your answer here on our Wiki, or if you notice some info is outdated.