Difference between revisions of "Electronics"
(25 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
− | [[File:Level 1 badge.png|alt=|left|frameless|100x100px]] | + | [[File:Level 1 badge.png|alt=Level 1 badge|left|frameless|100x100px]] |
Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative process by providing shared space, shared tools, materials and a knowledge base to turn their ideas into reality. | Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative process by providing shared space, shared tools, materials and a knowledge base to turn their ideas into reality. | ||
Line 25: | Line 25: | ||
===Training=== | ===Training=== | ||
− | |||
− | ===Tips=== | + | :'''https://www.instructables.com/Basic-Electronics/''' |
+ | :'''https://whizoo.com''' -- Controleo3 Reflow Oven Controller | ||
+ | |||
+ | ===Tips === | ||
:Measure twice, solder once. | :Measure twice, solder once. | ||
− | ===For Additional Help=== | + | ===For Additional Help === |
:Use the PPM Slack channel #electronics | :Use the PPM Slack channel #electronics | ||
Line 48: | Line 50: | ||
|'''Problem<br>Description''' | |'''Problem<br>Description''' | ||
|- | |- | ||
− | |[[File: | + | |[[File:HP 54510A scope.jpg|alt=HP 54510A scope|center|frameless|133x133px]] |
− | |''' | + | |'''oscilloscope''' |
+ | '''(250MHz, 2 channel)''' | ||
|hp | |hp | ||
− | | | + | |54510A |
+ | |<p style="text-align:right;">? </p> | ||
+ | | | ||
+ | |PPM [[Donations Received|<br>(donated by]] | ||
+ | [[Donations Received#2022 Donations|Josh Harlow)]] | ||
+ | |Working | ||
| | | | ||
+ | |- | ||
+ | | | ||
+ | |'''digital oscilloscope''' | ||
+ | '''(100MHz)''' | ||
+ | |||
+ | |PHILIPS | ||
+ | |PM 3070 | ||
+ | |<p style="text-align:right;">? </p> | ||
| | | | ||
|PPM | |PPM | ||
Line 64: | Line 80: | ||
|<p style="text-align:right;">$100 </p><p style="text-align:right;">(each)</p> | |<p style="text-align:right;">$100 </p><p style="text-align:right;">(each)</p> | ||
| | | | ||
− | |PPM [[Donations Received|(donated by PARADIGM SYSTEMS)]] | + | |PPM [[Donations Received|<br>(donated by PARADIGM SYSTEMS)]] |
|Working (both) | |Working (both) | ||
| | | | ||
Line 74: | Line 90: | ||
|<p style="text-align:right;">?</p> | |<p style="text-align:right;">?</p> | ||
|[[:File:SMD Reflow Oven.pdf|Class Documentation]] | |[[:File:SMD Reflow Oven.pdf|Class Documentation]] | ||
− | (by Adam Gleason) | + | (by Adam Gleason) |
− | |PPM [[Donations Received|(donated by PARADIGM SYSTEMS)]] | + | |PPM [[Donations Received|<br>(donated by PARADIGM SYSTEMS)]] |
|? | |? | ||
| | | | ||
Line 86: | Line 102: | ||
| | | | ||
| | | | ||
− | |PPM [[Donations Received#2021|(donated by Adam Gleason)]] | + | |PPM [[Donations Received#2021|<br>(donated by Adam Gleason)]] |
+ | |? | ||
+ | | | ||
+ | |- | ||
+ | |[[File:Multimeter hp 3478A.jpg|alt=Multimeter hp 3478A|center|frameless|133x133px]] | ||
+ | |'''MULTIMETER''' | ||
+ | |hp | ||
+ | | 3478A | ||
+ | | | ||
+ | | | ||
+ | |PPM | ||
|? | |? | ||
| | | | ||
Line 124: | Line 150: | ||
|Network Speed, | |Network Speed, | ||
Wired | Wired | ||
− | |Software | + | | Software |
− | | Owner | + | |Owner |
|Status | |Status | ||
− | |Problem Description | + | |Problem<br>Description |
|- | |- | ||
| | | | ||
Line 147: | Line 173: | ||
|<center>'''Computer'''</center> | |<center>'''Computer'''</center> | ||
|<center>'''System'''</center> | |<center>'''System'''</center> | ||
− | |<center>'''Estimated Value'''</center> | + | |<center>'''Estimated<br>Value'''</center> |
|<center>'''CPU'''</center> | |<center>'''CPU'''</center> | ||
|<center>'''Memory'''</center> | |<center>'''Memory'''</center> | ||
Line 156: | Line 182: | ||
|<center>'''Owner'''</center> | |<center>'''Owner'''</center> | ||
|<center>'''Status'''</center> | |<center>'''Status'''</center> | ||
− | |<center>'''Problem Description'''</center> | + | |<center>'''Problem<br>Description'''</center> |
|} | |} | ||
Design workstation ONLY! NO Facebook, social media, or random browsing. | Design workstation ONLY! NO Facebook, social media, or random browsing. | ||
Line 164: | Line 190: | ||
{| class="wikitable sortable" | {| class="wikitable sortable" | ||
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#864199; color:#ffffff;" | |- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#864199; color:#ffffff;" | ||
− | | style="vertical-align:middle;" | Picture | + | | style="vertical-align:middle;" |Picture |
|'''Item''' | |'''Item''' | ||
|'''Manufacturer''' | |'''Manufacturer''' | ||
Line 173: | Line 199: | ||
|'''Status''' | |'''Status''' | ||
|'''Problem<br>Description''' | |'''Problem<br>Description''' | ||
+ | |- | ||
+ | | | ||
+ | |'''Oscilloscope''' | ||
+ | '''(10MHz)''' | ||
+ | | | ||
+ | |ST-16B | ||
+ | |<p style="text-align:right;">?</p> | ||
+ | |[https://htcinstruments.com/images/ST-16A-ST-16B.pdf specs] | ||
+ | |PPM | ||
+ | |? | ||
+ | (in storage) | ||
+ | | | ||
|- | |- | ||
| | | | ||
Line 187: | Line 225: | ||
| | | | ||
|'''Squink PC''' | |'''Squink PC''' | ||
− | |HP Compaq | + | |HP Compaq |
− | |? | + | | ? |
(small form factor) | (small form factor) | ||
Line 201: | Line 239: | ||
|Sencore | |Sencore | ||
|MODEL PR57 | |MODEL PR57 | ||
− | | | + | |<p style="text-align:right;">?</p> |
| | | | ||
| | | | ||
Line 248: | Line 286: | ||
|<center>'''Manual'''</center> | |<center>'''Manual'''</center> | ||
|<center>'''Owner'''</center> | |<center>'''Owner'''</center> | ||
− | | <center>'''Owner''' | + | | <center>'''Owner''' |'''Status''' |
|<center>'''Problem<br>Description'''</center> | |<center>'''Problem<br>Description'''</center> | ||
|} | |} | ||
Line 274: | Line 312: | ||
|PPM | |PPM | ||
[https://wiki.pikespeakmakerspace.org/index.php/Donations_Received#2021_Donations (donated by David Wasmer, Sr.)] | [https://wiki.pikespeakmakerspace.org/index.php/Donations_Received#2021_Donations (donated by David Wasmer, Sr.)] | ||
− | | | + | |? |
| | | | ||
|- | |- | ||
− | | | + | |[[File:Multimeter.jpg|center|frameless|160x160px]] |
|'''CEN-TECH''' | |'''CEN-TECH''' | ||
'''7 FUNCTION DIGITAL MULTIMETERS (6)''' | '''7 FUNCTION DIGITAL MULTIMETERS (6)''' | ||
Line 284: | Line 322: | ||
|<p style="text-align:right;">$7</p> | |<p style="text-align:right;">$7</p> | ||
|Yes | |Yes | ||
− | |PPM | + | | PPM |
| | | | ||
− | |Some need batteries | + | |Some need batteries (9v) |
|- | |- | ||
|<center>'''Picture'''</center> | |<center>'''Picture'''</center> | ||
Line 304: | Line 342: | ||
===[[Wish List#Electronics|Wish List]]=== | ===[[Wish List#Electronics|Wish List]]=== | ||
+ | :Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make. | ||
− | ==Benefits and Policies== | + | == Benefits and Policies == |
{{Member Benefits}} | {{Member Benefits}} | ||
Line 320: | Line 359: | ||
==Software== | ==Software== | ||
− | + | :[[Autodesk Fusion 360 Tips|'''Fusion 360''']] | |
− | ==See Also== | + | |
+ | ==See Also == | ||
Links to other PPM Wiki pages (internal links): | Links to other PPM Wiki pages (internal links): | ||
− | + | :[[Arduino|'''Arduino Computers''']] | |
− | + | :[[Raspberry Pi|'''Raspberry Pi Computers''']] | |
− | + | :[[Ubuntu|'''Ubuntu Workstation''']] | |
− | ===[https://www.librarything.com/catalog/PikesPeakMakerspace/electronicsarea LibraryThing] -- Our electronics books | + | ==Curated Links == |
− | + | Links to other sites (external links): | |
− | + | :'''[https://www.librarything.com/catalog/PikesPeakMakerspace/electronicsarea LibraryThing] -- Our electronics-related books''' | |
− | + | :[https://www.ifixit.com/ '''IFIXIT'''] -- Repair guides for every thing, written by everyone. | |
− | + | :[https://www.androidauthority.com/different-types-of-usb-cables-804432/ '''Understanding different types of USB cables'''] -- Android Authority | |
− | ==Other Fun Stuff== | + | ==Other Fun Stuff == |
+ | Links to other sites (external links): | ||
+ | :[https://nostarch.com/open-circuits '''Open Circuits'''] -- stunning cross-section photography of electrical components | ||
+ | :'''[https://xkcd.com/730/ Circuit Diagram - xkcd]''' | ||
:'''[https://www.youtube.com/watch?v=UeXE39riKFc CuriousMarc] -- Vintage HP Equipment Restoration''' | :'''[https://www.youtube.com/watch?v=UeXE39riKFc CuriousMarc] -- Vintage HP Equipment Restoration''' | ||
:[https://www.youtube.com/channel/UCoj6RxIAQq8kmJme-5dnN0Q '''DIY Solar Power with Will Prowse'''] | :[https://www.youtube.com/channel/UCoj6RxIAQq8kmJme-5dnN0Q '''DIY Solar Power with Will Prowse'''] | ||
− | :[http://www.csevc.com/ '''Colorado Springs | + | :[http://www.csevc.com/ '''Colorado Springs Electric Vehicle Club'''] |
<gallery mode="nolines"> | <gallery mode="nolines"> | ||
File:THX NIK Tesla car.jpg|alt=THX NIK|<center>Tesla MODEL S 85D</center> | File:THX NIK Tesla car.jpg|alt=THX NIK|<center>Tesla MODEL S 85D</center> |
Revision as of 23:54, 5 December 2022
Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative process by providing shared space, shared tools, materials and a knowledge base to turn their ideas into reality.
We provide a work area with electronic equipment and electronic components for all makers, from the very beginner to the expert.
Electronics Area hand tools should be marked with purple tape or paint.
Safety First
Members must know the following information:
- In case of emergency, call 911.
- Our physical location is:
- 735 East Pikes Peak Avenue
- Colorado Springs, CO 80903
- use this when ordering pizza or an ambulance
PPM Fire Escape Plan
- Fire Escape Plan maps are posted throughout the Makerspace.
- There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.
First Aid
- There is a FIRST AID Supply Cabinet in our Kitchen Area.
- FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.
Eye Wash Stations
- Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.
Personal Protective Equipment (PPE)
- Wear protective equipment in all Wood and Metal Shop Areas.
- Wear gloves when using Isopropyl Alcohol and other cleaners.
Hazardous Chemicals
- All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.
- Review the Safety Data Sheet (SDS) information of unknown products before use.
- SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.
- Do not bring dangerous chemicals to the makerspace.
- Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.
- Please DO NOT paint indoors.
Classes and Training
New Member Orientation
Area Captain -- Steve Leininger
- To help out in the Electronics Area, contact the Area Captain on Slack.
- View all PPM Area Captains
Classes
- Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup
Training
- https://www.instructables.com/Basic-Electronics/
- https://whizoo.com -- Controleo3 Reflow Oven Controller
Tips
- Measure twice, solder once.
For Additional Help
- Use the PPM Slack channel #electronics
Equipment Lists
Electronics
Picture | Item | Manufacturer | Model Number |
Estimated Value |
Manual | Owner | Status | Problem Description |
oscilloscope
(250MHz, 2 channel) |
hp | 54510A | ? |
PPM (donated by |
Working | |||
digital oscilloscope
(100MHz) |
PHILIPS | PM 3070 | ? |
PPM | ? | |||
soldering stations (2) | HAKKO | DFX-888D | $100 (each) |
PPM (donated by PARADIGM SYSTEMS) |
Working (both) | |||
solder reflow oven | James Gravert | ? | ? |
Class Documentation
(by Adam Gleason) |
PPM (donated by PARADIGM SYSTEMS) |
? | ||
DC POWER SUPPLY
60v 1.5a 90w 1Ch |
Protek | 3006B | PPM (donated by Adam Gleason) |
? | ||||
MULTIMETER | hp | 3478A | PPM | ? | ||||
PULSE/FUNCTION GENERATOR
50 MHz |
hp | 8116A | https://drive.google.com/open?id=104pDXnh2KP2bFJKc1X4Q5bmQxFcRzHcf | PPM | Working | While technically in spec, the accuracy leaves something to be desired. | ||
Number |
Value |
Description |
Design Workstation
Picture | Computer | System | Estimated Value |
CPU | Memory | Storage | Network Speed,
Wired |
Software | Owner | Status | Problem Description |
Computer Workstation,
Dell monitors (2), speakers |
? | PPM | ? | ||||||||
Value |
Description |
Design workstation ONLY! NO Facebook, social media, or random browsing.
Electronics -- Not Working
Picture | Item | Manufacturer | Model Number |
Estimated Value |
Manual | Owner | Status | Problem Description |
Oscilloscope
(10MHz) |
ST-16B | ? |
specs | PPM | ?
(in storage) |
|||
Squink PCB Printer | BotFactory Inc | Squink | ? |
product page | PPM | Under repair,
(Steve Leininger) |
discontinued | |
Squink PC | HP Compaq | ?
(small form factor) |
? |
PPM | ? | |||
AC "POWERITE" | Sencore | MODEL PR57 | ? |
Not Working | Range buttons seem to be stuck | |||
Number |
Value |
Description |
Electronics -- Vintage
Picture | Item | Manufacturer | Model Number |
Estimated Value |
Manual | Owner | Status | Problem Description |
FONE FLASHER 2 | Radio Shack | 43-178 | $20 |
no | PPM | ? | ||
Number |
Value |
Status | Description |
Hand Tools
Picture | Item | Manufacturer | Model Number |
Estimated Value |
Manual | Owner | Status | Problem Description |
HYDRAULIC CRIMPING TOOL
with dies |
YQK-70 | PPM | ? | |||||
CEN-TECH
7 FUNCTION DIGITAL MULTIMETERS (6) |
Harbor Freight | 90899 | $7 |
Yes | PPM | Some need batteries (9v) | ||
Number |
Value |
Description |
- Electronics Area hand tools should be marked with purple tape or paint.
- Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.
Donations Received
Wish List
- Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make.
Benefits and Policies
- PPM members enjoy discounts at the following local merchants:
- (walk in, show proof of membership)
Company | Website | Benefit | Directions to |
Woodcraft of Colorado Springs | 10% discount | 4438 Austin Bluffs Parkway | |
CO Lumber Specialties | 10% discount | 3636 Stone Avenue | |
GENERAL AIR | 10% discount | 3031 N Nevada Ave. | |
ACE Hardware Uintah Gardens | 10% discount | 1830 W Uintah Street | |
- Map of stores that provide PPM member discounts
- Map of helpful local resources curated by our makers
- At home LightBurn subscriptions can be purchased at a discounted rate for being a PPM member.
- The discount code is saved as a Pinned Message in our 'laser-cutter' channel in Slack.
Equipment Reservations
Materials
- Batteries, 20700 cells
- Donate for "General Supplies" via PayPal: bit.ly/ppmstuff
- Or, leave donations in a black payment box, or use a QR code.
Red Tags
- Use a Red Tag, which can be found in the red tag area, to designate broken equipment.
Scrap and Trash
- Trash day is MONDAY
- Recycling day is MONDAY (96 gallon tote)
- Single Stream Recycling provided by Waste Connections. Paper, cardboard, cans, glass, and one time use plastics.
- Empty recycling and trash into our dumpster at the back (south side) of the building.
- Always leave the space better than you found it.
Software
See Also
Links to other PPM Wiki pages (internal links):
Curated Links
Links to other sites (external links):
- LibraryThing -- Our electronics-related books
- IFIXIT -- Repair guides for every thing, written by everyone.
- Understanding different types of USB cables -- Android Authority
Other Fun Stuff
Links to other sites (external links):
- Open Circuits -- stunning cross-section photography of electrical components
- Circuit Diagram - xkcd
- CuriousMarc -- Vintage HP Equipment Restoration
- DIY Solar Power with Will Prowse
- Colorado Springs Electric Vehicle Club
- THX NIK Tesla car.jpg
Tesla MODEL S 85D
- PPM Tool Color Map — Interactive
- Search the PPM Wiki — include both Content pages and Multimedia
- Contact Us if you cannot find your answer here on our Wiki, or you notice something is outdated.