Welding Area
The Welding Area at Pikes Peak Makerspace (PPM) consists mostly of Level 3 equipment.
Additional training and certification is required to use any of our Level 3 equipment..
Welding Area hand tools should be marked with pink tape or paint or powder coating.
Safety First
Members must know the following information:
- In case of emergency, call 911.
- Our physical location is:
- 735 East Pikes Peak Avenue
- Colorado Springs, CO 80903
- use this when ordering pizza or an ambulance
PPM Fire Escape Plan
- Fire Escape Plan maps are posted throughout the Makerspace.
- There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.
First Aid
- There is a FIRST AID Supply Cabinet in our Kitchen Area.
- FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.
Eye Wash Stations
- Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.
Personal Protective Equipment (PPE)
- Wear protective equipment in all Wood and Metal Shop Areas.
- Wear gloves when using Isopropyl Alcohol and other cleaners.
Hazardous Chemicals
- All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.
- Review the Safety Data Sheet (SDS) information of unknown products before use.
- SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.
- Do not bring dangerous chemicals to the makerspace.
- Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.
- Please DO NOT paint indoors.
Impairment
- The use of PPM equipment requires you to be alert, attentive, and focused.
- Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.
Classes and Training
New Member Orientation
Area Captain -- Trevor Banks
- Area Captain Duties
- To help out in the Welding Area, contact the Area Captain on Slack.
- View all PPM Area Captains
Classes
- Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup
Training
Links to other sites (external links):
For Additional Help
- Use the PPM Slack channel #metal-shop
The following pages contain historical information. The pages are provided for reference only.
Equipment Lists
Welding Equipment
Picture | Item | Manufacturer | Model Number |
Estimated Value |
Owner |
Welder,
MIG, TIG and stick |
Esab | multimaster 260 | PPM | ||
metal table,
2' x 8’ 40” tall |
N/A | N/A | ? |
PPM | |
HEAVY DUTY CUTTING & WELDING KIT | FIREPOWER | OXYFUEL 350 | $399.99 |
PPM | |
TORCH CART | N/A | N/A | $129.99 |
PPM | |
ACETYLENE CYLINDER | N/A | 10 CF | $149.99 |
PPM | |
OXYGEN CYLINDER | N/A | 20 CF | $199.99 |
PPM | |
Titanium 45A
plasma cutter |
$929.99 |
PPM | |||
Number |
Value |
Hand Tools
Picture | Item | Manufacturer | Model Number |
Estimated Value |
Owner |
BESSEY CORNER METAL CLAMP | BESSEY | WSM-9 | $228.99 |
PPM | |
WELDING CLAMP/PLIERS | HOBART | 770115 | $9.39 |
PPM | |
LOCKING C CLAMP | IRWIN | 9SP | $14.99 |
PPM | |
WELDING HELPER PLIERS | EASTWOOD | 081806A | $18.99 |
PPM | |
LOCKER | N/A | N/A | $750 |
PPM | |
ACE LOCK | ACE HARDWARE | CODE 1551 | $18.99 |
PPM | |
ADJUSTABLE WRENCH | FULLER | $17.99 |
PPM | ||
Number |
Value |
- Welding Area hand tools should be marked with pink tape or paint or powder coating.
- Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.
Donations Received
Wish List
- Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make.
Benefits and Policies
- PPM members enjoy discounts at the following local merchants:
- (bring proof of membership)
Company | Website | Benefit | Directions to |
Woodcraft of Colorado Springs | 10% discount | 4438 Austin Bluffs Parkway | |
CO Lumber Specialties | 10% discount | 3636 Stone Avenue | |
GENERAL AIR | 10% discount | 3031 N Nevada Ave. | |
ACE Hardware Uintah Gardens | 10% discount | 1830 W Uintah Street | |
- Map of stores that provide PPM member discounts
- Map of helpful local resources curated by our makers
- At home LightBurn subscriptions can be purchased at a discounted rate for being a PPM member.
- The discount code is saved as a Pinned Message in our 'laser-cutter' channel in Slack.
Equipment Reservations
Materials
- Donate for "General Supplies" via PayPal: bit.ly/ppmstuff
- Or, leave donations in a black payment box, or use a QR code.
Red Tags
Scrap and Trash
- Trash day is MONDAY
- Recycling day is MONDAY (96 gallon tote)
- Single Stream Recycling provided by Waste Connections. Paper, cardboard, cans, glass, and one time use plastics.
- Empty recycling and trash into our dumpster at the back (south side) of the building.
- Always leave the space better than you found it.
Software
Links to other PPM Wiki pages (internal links):
See Also
Links to other PPM Wiki pages (internal links):
Curated Links
Links to other sites (external links):
Other Fun Stuff
Links to other sites (external links):
- Welding for Woodworkers
- Jamie Hyneman On Welding in His Workshop
- J-B WELD -- Worlds' Strongest Bond
Search the PPM Wiki — include Content pages as well as Multimedia.
Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.