Difference between revisions of "CNC"
(79 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
− | [[File: | + | [[File:Level 3 badge.png|alt=Level 3 badge used at Pikes Peak Makerspace|left|frameless|100x100px|PPM TRAINING & CERTIFICATION REQUIRED]] |
− | Pikes Peak Makerspace (PPM) is | + | At Pikes Peak Makerspace (PPM), our CNC room is 234 square feet (13'x18'). |
− | '''The CNC | + | '''The CNC Room is an important part of the 5,500 square foot building that we lease.''' |
− | + | The CNC Area at PPM consists mostly of Level 3 equipment. | |
− | + | Additional PPM training and then certification is required to use any of our Level 3 equipment. | |
+ | |||
+ | Additional PPM training is required to use any of our Level 2 equipment. | ||
+ | |||
+ | Our trainers are passionate about sharing their knowledge and ensuring a positive learning experience for all. | ||
+ | |||
+ | We are grateful for their commitment and dedication to our community. | ||
'''CNC Area''' hand tools should be marked with <span style="color:#2B78BE">'''blue'''</span> tape or paint. | '''CNC Area''' hand tools should be marked with <span style="color:#2B78BE">'''blue'''</span> tape or paint. | ||
+ | |||
+ | '''[https://pikespeakmakerspace.org/reserve CNC Check-in and Reservation]''' | ||
<br> | <br> | ||
<br> | <br> | ||
Line 17: | Line 25: | ||
<br> | <br> | ||
<p style="padding:0.2em 0.4em; background:#2B78BE; color:#FFFFFF; font-size:15%;"> </p> | <p style="padding:0.2em 0.4em; background:#2B78BE; color:#FFFFFF; font-size:15%;"> </p> | ||
− | |||
===[[New Member Orientation]]=== | ===[[New Member Orientation]]=== | ||
− | ===Area Leader | + | ===Area Leader — Rodney Roy=== |
− | :'''Additional CNC | + | :'''Additional CNC Leaders wanted''' |
− | :To help out in the CNC Area contact the Area Leader on | + | :To help out in the CNC Area contact the Area Leader on Slack. |
+ | |||
+ | ==Classes== | ||
+ | :PPM announces its [https://www.meetup.com/pikespeakmakerspace/events '''Upcoming events, including classes, on Meetup'''] | ||
+ | |||
+ | ==Past Events== | ||
+ | <gallery widths="200" heights="125"> | ||
+ | File:TOSC tours CNC Area.jpg|alt=TOSC tours CNC Area|'''TOSC tours CNC Area<br>(2021-11-24)''' | ||
+ | File:CNC Area 2021-11-24.jpg|alt=CNC Area 2021-11-24|'''CNC Area<br>(2021-11-24)''' | ||
+ | File:CNC Class Nov 2017.jpg|alt=CNC Class November 18, 2017|'''CNC Class<br>(November 18, 2017)''' | ||
+ | File:Downtown-CS-check.jpg|alt=Grant check|'''Grant check presentation<br>(July 30, 2016)''' | ||
+ | </gallery> | ||
− | + | ==Training== | |
− | |||
− | |||
Links to external sites: | Links to external sites: | ||
+ | :[https://www.youtube.com/c/AvidCNC/playlists '''Avid CNC Playlists on YouTube'''] | ||
:'''[https://www.cnccookbook.com/g-wizard-cnc-speeds-and-feeds-calculator/ G-Wizard, CNC Speeds and Feeds Calculator]''' | :'''[https://www.cnccookbook.com/g-wizard-cnc-speeds-and-feeds-calculator/ G-Wizard, CNC Speeds and Feeds Calculator]''' | ||
:'''[https://handibot.com/ Handibot]''' — smart power tool | :'''[https://handibot.com/ Handibot]''' — smart power tool | ||
:[https://docs.google.com/document/d/14J23HPfQ99lgIvZXp89AtvGRvSQFEfqUR9xPNU9O4cA/edit#heading=h.cm2jvhhse2sz '''Intro to Roland MDX-15'''] | :[https://docs.google.com/document/d/14J23HPfQ99lgIvZXp89AtvGRvSQFEfqUR9xPNU9O4cA/edit#heading=h.cm2jvhhse2sz '''Intro to Roland MDX-15'''] | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
==Equipment Lists== | ==Equipment Lists== | ||
− | |||
===PPM Equipment List=== | ===PPM Equipment List=== | ||
{| class="wikitable" | {| class="wikitable" | ||
|+ | |+ | ||
− | |- style="font-weight:bold; text-align: | + | |- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#2B78BE; color:#ffffff;" |
− | | style="vertical-align:middle;" | | + | | style="vertical-align:middle;" |Picture |
− | | | + | |Item |
− | | | + | |Manufacturer |
− | | | + | |Model<br>Number |
− | | | + | |Reference<br>Materials |
+ | |Owner | ||
|- | |- | ||
| | | | ||
|'''CNC router parts pro'''<br> | |'''CNC router parts pro'''<br> | ||
− | [[File:Level 3 badge.png|left|frameless|55x55px]] | + | [[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|55x55px]] |
|Avid CNC | |Avid CNC | ||
| | | | ||
− | | | + | |[https://www.avidcnc.com/pro4896-4-x-8-cnc-router-kit-p-253.html 4' x 8' CNC Router Kit] |
+ | |'''PPM''' | ||
|- | |- | ||
+ | | | ||
| | | | ||
| | | | ||
Line 74: | Line 80: | ||
| | | | ||
|'''Roland CNC'''<br> | |'''Roland CNC'''<br> | ||
− | [[File:Level_2_badge.png|left|frameless|55x55px]] | + | [[File:Level_2_badge.png|alt=Level 2 badge|left|frameless|55x55px]] |
− | | | + | |Roland |
− | | Modela | + | |Modela |
MDX-15 | MDX-15 | ||
|[https://www.rolanddga.com/support/products/milling/modela-mdx-15-3d-milling-machine Roland Technical Support] | |[https://www.rolanddga.com/support/products/milling/modela-mdx-15-3d-milling-machine Roland Technical Support] | ||
+ | |'''PPM''' | ||
|- | |- | ||
| | | | ||
|'''handibot'''<br> | |'''handibot'''<br> | ||
− | [[File:Level_2_badge.png|left|frameless|55x55px]] | + | [[File:Level_2_badge.png|alt=Level 2 badge|left|frameless|55x55px]] |
|ShopBot | |ShopBot | ||
| | | | ||
− | | | + | |[https://www.shopbottools.com/training/ Training Material] |
− | | | + | |'''PPM''' |
− | + | |- style="font-weight:bold; font-family:Arial, Helvetica, sans-serif !important; color:#000000;" | |
− | | | + | | style="vertical-align:middle;" | |
− | | | + | | |
− | | | + | | |
− | | | + | | |
+ | | | ||
+ | | | ||
|} | |} | ||
===CNC Room Computer=== | ===CNC Room Computer=== | ||
{| class="wikitable" | {| class="wikitable" | ||
− | |- style="font-weight:bold; text-align: | + | |- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#2B78BE; color:#ffffff;" |
− | | | + | |Item |
− | + | |Application<br>Software | |
− | | | + | |Manufacturer |
− | + | |Model<br>Number | |
− | | | + | |Network Speed,<br>Wired |
− | | | + | |System<br>Software |
− | | | ||
|- | |- | ||
+ | |'''computer''' | ||
+ | |Mach4, | ||
+ | |||
+ | VCarve | ||
+ | |||
+ | (old version) | ||
| | | | ||
− | |||
| | | | ||
+ | | | ||
+ | |Windows | ||
+ | |- | ||
| | | | ||
| | | | ||
| | | | ||
| | | | ||
− | |||
| | | | ||
| | | | ||
+ | |- | ||
+ | |'''monitor''' | ||
| | | | ||
| | | | ||
Line 121: | Line 138: | ||
| | | | ||
|- | |- | ||
− | + | |'''wired mouse''' | |
− | |''' | ||
| | | | ||
| | | | ||
Line 129: | Line 145: | ||
| | | | ||
|- | |- | ||
+ | |'''wireless keyboard''' | ||
| | | | ||
− | |||
| | | | ||
| | | | ||
| | | | ||
| | | | ||
+ | |- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;" | ||
| | | | ||
− | |||
− | |||
− | |||
| | | | ||
| | | | ||
Line 144: | Line 158: | ||
| | | | ||
| | | | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
|} | |} | ||
Line 158: | Line 164: | ||
|+ | |+ | ||
− | |- style="font-weight:bold; text-align: | + | |- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#2B78BE; color:#ffffff;" |
− | | style="vertical-align:middle;" | | + | | style="vertical-align:middle;" |Picture |
− | | | + | |Item |
− | | | + | |Manufacturer |
− | | | + | |Model<br>Number |
− | | | + | |Reference<br>Materials |
+ | |Owner | ||
|- | |- | ||
|[[File:Handibot.jpg|alt=handibot engraver|center|frameless|150x150px]] | |[[File:Handibot.jpg|alt=handibot engraver|center|frameless|150x150px]] | ||
Line 169: | Line 176: | ||
|ShopBot | |ShopBot | ||
| | | | ||
− | | | + | |[https://www.shopbottools.com/training/ Training Material] |
− | | | + | |'''John Norton''' |
− | | | + | |- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;" |
− | | | + | | style="vertical-align:middle;" | |
− | | | ||
| | | | ||
| | | | ||
− | |||
| | | | ||
− | |||
− | |||
| | | | ||
| | | | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
|} | |} | ||
− | |||
===Hand Tools=== | ===Hand Tools=== | ||
Line 195: | Line 191: | ||
:Return all tools to their proper location after use. This rule applies to all areas of our Makerspace. | :Return all tools to their proper location after use. This rule applies to all areas of our Makerspace. | ||
− | === | + | ===Equipment Reservations=== |
− | + | *Reserve 24 Hours in Advance to Guarantee Equipment. | |
− | + | *Unreserved equipment is first come first serve. | |
+ | *Reservations are given up after 15 minute no show. | ||
+ | |||
+ | '''If you don't have a reservation:''' | ||
+ | |||
+ | *'''Be sure your job does not run longer than an upcoming reservation or you are expected to stop your job.''' | ||
+ | *'''[https://pikespeakmakerspace.org/reserve Use this form to sign in (No more paper)]''' | ||
− | |||
− | |||
− | |||
− | + | [[Donations Received|'''Donations Received''']] | |
− | |||
− | |||
− | ''' | + | [[Wish List#CNC|'''Wish List''']] |
+ | :Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make. | ||
− | + | ==Benefits== | |
− | + | {{Member Benefits}} | |
− | |||
− | ===Materials | + | ==Policies== |
+ | '''Materials''' | ||
:'''Donate for "General Supplies" via PayPal: [https://bit.ly/ppmstuff bit.ly/ppmstuff]''' | :'''Donate for "General Supplies" via PayPal: [https://bit.ly/ppmstuff bit.ly/ppmstuff]''' | ||
:'''''Or, leave donations in a black payment box, or use a QR code.''''' | :'''''Or, leave donations in a black payment box, or use a QR code.''''' | ||
{{Red Tags}} | {{Red Tags}} | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
==Member Showcase== | ==Member Showcase== | ||
− | <gallery> | + | <gallery widths="200" heights="125" > |
− | File:2020ram-mh.jpg|alt=subwoofer box| | + | File:2020ram-mh.jpg|alt=subwoofer box|'''subwoofer box cut on CNC<br>by Trevor Banks''' |
− | File:Ram-mh.jpg|alt=subwoofer box| | + | File:Ram-mh.jpg|alt=subwoofer box|'''subwoofer box cut on CNC<br>by Trevor Banks''' |
− | File:Catch all tray.jpg|alt=wooden catch all tray| | + | File:Catch all tray.jpg|alt=wooden catch all tray|'''Walnut catch all tray<br>by Henry D.''' |
− | File:Monarch CDC.jpg|alt=Monarch CDC| | + | File:Monarch CDC.jpg|alt=Monarch CDC|'''Monarch CDC sign<br>by Michael H.''' |
− | File:Chair glue-up.jpg|alt=Early CNC | + | File:Chair glue-up.jpg|alt=Early CNC project by Bob P.|'''Early CNC project<br>finished chair<br>by Bob P.''' |
− | File:Chair Bob Parsons.jpg|alt=Early CNC | + | File:Chair Bob Parsons.jpg|alt=Early CNC project by Bob P.|'''Early CNC project<br>by Bob P.<br>(June 2017)''' |
</gallery> | </gallery> | ||
− | |||
{{Template:Showcase_blurb}} | {{Template:Showcase_blurb}} | ||
− | == | + | == Related Pages == |
− | Links to | + | Links to related PPM Wiki pages: |
− | |||
:[[Wood_Shop|<span style="color:#FFFFFF; background:#42B649"> '''Wood Shop''' </span>]] | :[[Wood_Shop|<span style="color:#FFFFFF; background:#42B649"> '''Wood Shop''' </span>]] | ||
− | |||
:[[Metal_Shop|<span style="color:#FFFFFF; background:#EB4F9C"> '''Metal Shop''' </span>]] | :[[Metal_Shop|<span style="color:#FFFFFF; background:#EB4F9C"> '''Metal Shop''' </span>]] | ||
+ | :[[Shed|<span style="color:#000000; background:#D7D4EB"> '''Shed''' </span>]] | ||
− | :[[ | + | :'''[[Mach4 Tips]]''' |
+ | :'''[[Autodesk Fusion Tips]]''' | ||
+ | :'''[[VCarve Tips]]''' | ||
− | ==Curated Links== | + | ==Hand-Curated Links== |
Links to member-recommended external sites: | Links to member-recommended external sites: | ||
+ | :'''[https://littlemachineshop.com/info/business_resources.php?ID=1343147249&CAT=1 Little Machine Shop]''' — Resource Information | ||
:[https://www.precisebits.com/ '''PreciseBits'''] — Specialty Tools, Tutorials, Support | :[https://www.precisebits.com/ '''PreciseBits'''] — Specialty Tools, Tutorials, Support | ||
− | :[https://www. | + | :'''[https://www.youtube.com/watch?v=dY8v0j6uEJc Frank makes]''' — CNC Build on YouTube |
− | == | + | == For Additional Help == |
− | + | :For additional help, use the PPM Slack channel #cnc-machine | |
− | :[ | + | :[[How To Slack#PPM Channel Names and Descriptions|'''List of all PPM Slack channels''']] |
− | : | + | : Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the community. |
{{Template:Footer}} | {{Template:Footer}} | ||
− | + | :{{Template:Ideas into reality}} | |
<p style="padding:0.2em 0.4em; background:#2B78BE; color:#FFFFFF; font-size:15%;"> </p> | <p style="padding:0.2em 0.4em; background:#2B78BE; color:#FFFFFF; font-size:15%;"> </p> | ||
+ | |||
<!--Woodshop--> | <!--Woodshop--> |
Revision as of 17:36, 30 April 2024
At Pikes Peak Makerspace (PPM), our CNC room is 234 square feet (13'x18').
The CNC Room is an important part of the 5,500 square foot building that we lease.
The CNC Area at PPM consists mostly of Level 3 equipment.
Additional PPM training and then certification is required to use any of our Level 3 equipment.
Additional PPM training is required to use any of our Level 2 equipment.
Our trainers are passionate about sharing their knowledge and ensuring a positive learning experience for all.
We are grateful for their commitment and dedication to our community.
CNC Area hand tools should be marked with blue tape or paint.
Safety First
Members must know the following information:
- In case of emergency, call 911.
- Our physical location is:
- 735 East Pikes Peak Avenue
- Colorado Springs, CO 80903
- use this when ordering pizza or an ambulance
PPM Fire Escape Plan
- Fire Escape Plan maps are posted throughout the Makerspace.
- There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.
First Aid
- There is a FIRST AID Supply Cabinet in our Kitchen Area.
- FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.
Eye Wash Stations
- Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.
Personal Protective Equipment (PPE)
- Wear protective equipment in all Wood and Metal Shop Areas.
- Wear gloves when using Isopropyl Alcohol and other cleaners.
Hazardous Chemicals
- All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.
- Review the Safety Data Sheet (SDS) information of unknown products before use.
- SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.
- Do not bring dangerous chemicals to the makerspace.
- Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.
- Please DO NOT paint indoors.
Impairment
- The use of PPM equipment requires you to be alert, attentive, and focused.
- Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.
New Member Orientation
Area Leader — Rodney Roy
- Additional CNC Leaders wanted
- To help out in the CNC Area contact the Area Leader on Slack.
Classes
- PPM announces its Upcoming events, including classes, on Meetup
Past Events
Training
Links to external sites:
- Avid CNC Playlists on YouTube
- G-Wizard, CNC Speeds and Feeds Calculator
- Handibot — smart power tool
- Intro to Roland MDX-15
Equipment Lists
PPM Equipment List
Picture | Item | Manufacturer | Model Number |
Reference Materials |
Owner |
CNC router parts pro |
Avid CNC | 4' x 8' CNC Router Kit | PPM | ||
Roland CNC |
Roland | Modela
MDX-15 |
Roland Technical Support | PPM | |
handibot |
ShopBot | Training Material | PPM | ||
CNC Room Computer
Item | Application Software |
Manufacturer | Model Number |
Network Speed, Wired |
System Software |
computer | Mach4,
VCarve (old version) |
Windows | |||
monitor | |||||
wired mouse | |||||
wireless keyboard | |||||
CNC Equipment List
Picture | Item | Manufacturer | Model Number |
Reference Materials |
Owner |
handibot | ShopBot | Training Material | John Norton | ||
Hand Tools
- CNC Area hand tools should be marked with blue tape or paint.
- Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.
Equipment Reservations
- Reserve 24 Hours in Advance to Guarantee Equipment.
- Unreserved equipment is first come first serve.
- Reservations are given up after 15 minute no show.
If you don't have a reservation:
- Be sure your job does not run longer than an upcoming reservation or you are expected to stop your job.
- Use this form to sign in (No more paper)
- Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make.
Benefits
- PPM members enjoy discounts at the following local merchants:
- (bring proof of membership)
Company | Website | Benefit | Directions to |
Woodcraft of Colorado Springs | 10% discount | 4438 Austin Bluffs Parkway | |
CO Lumber Specialties | 10% discount | 3636 Stone Avenue | |
GENERAL AIR | 10% discount | 3031 N Nevada Ave. | |
ACE Hardware Uintah Gardens | 10% discount | 1830 W Uintah Street | |
- Map of stores that provide PPM member discounts
- Map of helpful local resources curated by our makers
- At home LightBurn subscriptions can be purchased at a discounted rate for being a PPM member.
- The discount code is saved as a Pinned Message in our 'laser-cutter' channel in Slack.
Policies
Materials
- Donate for "General Supplies" via PayPal: bit.ly/ppmstuff
- Or, leave donations in a black payment box, or use a QR code.
Red Tags
- If equipment needs repairs, place a Red Tag on it and report it via the Pikes Peak Makerspace Slack channel #red-tags-issues
- This advises others on the malfunctioning equipment and ensures that actions can be taken to service/repair the equipment.
Member Showcase
- For even more member projects, visit our #showcase channel on Slack, or follow our social media links.
Related Pages
Links to related PPM Wiki pages:
Hand-Curated Links
Links to member-recommended external sites:
- Little Machine Shop — Resource Information
- PreciseBits — Specialty Tools, Tutorials, Support
- Frank makes — CNC Build on YouTube
For Additional Help
- For additional help, use the PPM Slack channel #cnc-machine
- List of all PPM Slack channels
- Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the community.
Search the PPM Wiki — include Content pages as well as Multimedia.
Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.
Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative processes by providing shared space, shared tools, materials, software, and a knowledge base to turn their ideas into reality.