Laser

From Pikes Peak Makerspace Wiki
Revision as of 18:52, 1 December 2021 by Warren (talk | contribs) (→‎Tips)
Jump to navigation Jump to search

The Laser Engraver/Cutter Area at Pikes Peak Makerspace consists mostly of Level 2 equipment.

Additional training is required to use our Level 2 equipment.

Safety First

Covid-19 notice

In case of emergency, call 911

Our location is 735 East Pikes Peak Avenue, Colorado Springs, CO 80903

Personal Protective Equipment (PPE)

Classes and Training

Area Captains

Tim DeLeon (BOSSLASER)

Robbie Cochran (Epilog Laser)

Classes

Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup

Pikes Peak Makerspace Boss Laser Intro -- external link to PPM YouTube channel

For Help

Message in PPM Slack channel #laser-cutter

Tips

DO NOT cut materials with PVC on either laser, this will release chlorine gas which is toxic.


Warn.png The following pages contain historical information. The pages are provided for reference only.

Equipment Lists

BOSSLASER
Picture Item Manufacturer Model

Number

Estimated Value Manual Serial

Number

Owner Status Problem

Description

BOSS LASER engraver
Boss 150 Watt laser Boss LS-3655 $20,000 PPM working
PC HP h8-1117c $250 PPM working
Monitor Dell $100 PPM working
Picture Item Manufacturer Model

Number

Estimated Value Manual Serial

Number

Owner Status Problem

Description

Zing LASER
Picture Item Manufacturer Model

Number

Estimated Value Manual Serial

Number

Owner Status Problem

Description

Zing LASER.jpg
Zing

30

Watt Laser

Epilog Laser 10000 Laser System $5,800 yes, and online 10030-1429591612 PPM working
PC HP h8-1117c $250 PPM working
Monitor Dell $100 PPM working
Picture Item Manufacturer Model

Number

Estimated Value Manual Serial

Number

Owner Status Problem

Description

Wish List

Donations Received

Hand Tools

Hand tools that belong in the Laser Area should be marked with red tape or paint.

Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Policies

Materials

DO NOT cut materials with PVC on either laser, this will release chlorine gas which is toxic.

Donate for "Wood Sheet for Laser" via PayPal: bit.ly/ppmstuff

Or, leave donations in a black payment box, or use a QR code.

Help Us Keep Stocked Up!

PPE

Scrap and Trash

Software

LightBurn (BOSSLASER, not Epilog)

Adobe Acrobat (Epilog)

Showcase

Boss Laser Photo Gallery

Epilog Laser Photo Gallery

Other Fun Stuff

PPM YouTube Channel

"featured" videos, (the YouTube "HOME" tab)

"Things we've built", Created playlists, including 3D-printed robotic hand (2015)