Difference between revisions of "3D Printing"

From Pikes Peak Makerspace Wiki
Jump to navigation Jump to search
Line 9: Line 9:
  
 
===Emergency Contacts:===
 
===Emergency Contacts:===
−
Drew Johnson, Executive Director
+
In case of emergency, call 911
−
 
 
−
Trevor Banks, Area Captain
 
  
 
===Personal Protective Equipment (PPE):===
 
===Personal Protective Equipment (PPE):===
Line 20: Line 18:
 
=== For Help: ===
 
=== For Help: ===
 
Message in PPM Slack channel #3d-printing
 
Message in PPM Slack channel #3d-printing
 +
 +
Trevor Banks, Area Captain
 
=== [[Introduction to 3D Printing]]===
 
=== [[Introduction to 3D Printing]]===
 
===[[Intro to SLA 3D Printing]]===
 
===[[Intro to SLA 3D Printing]]===
Line 27: Line 27:
 
!Picture
 
!Picture
 
!'''Item'''
 
!'''Item'''
−
!'''Owner'''
 
 
!'''Manufacturer'''
 
!'''Manufacturer'''
 
!'''Model'''
 
!'''Model'''
Line 35: Line 34:
 
!'''Serial'''
 
!'''Serial'''
 
'''Number'''
 
'''Number'''
 +
!'''Owner'''
 
!'''Status'''
 
!'''Status'''
 
Up/Down
 
Up/Down
Line 43: Line 43:
 
|'''Prusa Mk2s'''
 
|'''Prusa Mk2s'''
 
'''(Medussa)'''
 
'''(Medussa)'''
−
|PPM
 
 
|Prusa Research
 
|Prusa Research
 
|N/A
 
|N/A
Line 49: Line 48:
 
|Included
 
|Included
 
|N/A
 
|N/A
 +
|PPM
 
|Up
 
|Up
 
|
 
|
Line 55: Line 55:
 
|'''Prusa Mk2s'''
 
|'''Prusa Mk2s'''
 
'''MMU2'''
 
'''MMU2'''
−
|PPM
 
 
|Prusa Research
 
|Prusa Research
 
|
 
|
Line 61: Line 60:
 
|Included
 
|Included
 
|N/A
 
|N/A
 +
|PPM
 
|Down
 
|Down
 
|MMU (Multi Material Unit) needs repair.
 
|MMU (Multi Material Unit) needs repair.
Line 67: Line 67:
 
|
 
|
 
|'''Prusa MK2S (Haywire)'''
 
|'''Prusa MK2S (Haywire)'''
−
|PPM
 
 
|Prusa Research
 
|Prusa Research
 
|Prusa MK2S
 
|Prusa MK2S
Line 73: Line 72:
 
|Included
 
|Included
 
|N/A
 
|N/A
 +
|PPM
 
| Up
 
| Up
 
| Needs new bed and backup thermistors.
 
| Needs new bed and backup thermistors.
Line 79: Line 79:
 
|'''Taz 5'''
 
|'''Taz 5'''
 
'''(Mr. T)'''
 
'''(Mr. T)'''
−
|PPM
 
 
|Lulzbot
 
|Lulzbot
 
|Taz 5
 
|Taz 5
Line 85: Line 84:
 
|Included
 
|Included
 
|N/A
 
|N/A
 +
|PPM
 
|Up
 
|Up
 
|
 
|
Line 91: Line 91:
 
|'''Taz 5'''
 
|'''Taz 5'''
 
'''(Tizzy)'''
 
'''(Tizzy)'''
−
|PPM
 
 
|Lulzbot
 
|Lulzbot
 
|Taz 5
 
|Taz 5
Line 97: Line 96:
 
|Included
 
|Included
 
|N/A
 
|N/A
 +
|PPM
 
|Down
 
|Down
 
| Board may need to be replaced. PEI sheet broken in half.  
 
| Board may need to be replaced. PEI sheet broken in half.  
Line 106: Line 106:
  
 
'''resin printer'''
 
'''resin printer'''
−
|PPM
 
 
|Anycubic
 
|Anycubic
 
|N/A
 
|N/A
Line 112: Line 111:
 
|N/A
 
|N/A
 
|N/A
 
|N/A
 +
|PPM
 
|Up
 
|Up
 
|
 
|
Line 117: Line 117:
 
|[[File:UV Curing Box.jpg|alt=UV Curing Box|none|thumb|200x200px]]
 
|[[File:UV Curing Box.jpg|alt=UV Curing Box|none|thumb|200x200px]]
 
|'''UV curing box'''
 
|'''UV curing box'''
−
|PPM
 
 
|
 
|
 
|
 
|
Line 123: Line 122:
 
|
 
|
 
|
 
|
 +
|PPM
 
|Up
 
|Up
 
|Description:  
 
|Description:  
Line 130: Line 130:
 
|'''Computer'''
 
|'''Computer'''
 
'''(laptop)'''
 
'''(laptop)'''
−
|PPM
 
 
|hp
 
|hp
 
| EliteBook 8570w
 
| EliteBook 8570w
Line 136: Line 135:
 
|
 
|
 
|
 
|
 +
|PPM
 
|Up
 
|Up
 
|
 
|
Line 141: Line 141:
 
|[[File:Dryer oven.jpg|alt=Dryer oven|none|thumb|200x200px]]
 
|[[File:Dryer oven.jpg|alt=Dryer oven|none|thumb|200x200px]]
 
|'''lab oven / dryer w timer'''
 
|'''lab oven / dryer w timer'''
−
|PPM
 
 
|Curtin Matheson
 
|Curtin Matheson
 
|
 
|
Line 147: Line 146:
 
|(none)
 
|(none)
 
|
 
|
 +
|PPM
 
|Up
 
|Up
 
|Description: ~12x12x12 interior
 
|Description: ~12x12x12 interior
Line 152: Line 152:
 
|[[File:Filament dryer box.jpg|alt=filament dryer box|thumb|200x200px]]
 
|[[File:Filament dryer box.jpg|alt=filament dryer box|thumb|200x200px]]
 
|'''filament dryer box'''
 
|'''filament dryer box'''
−
|PPM
 
 
|N/A
 
|N/A
 
|N/A
 
|N/A
Line 158: Line 157:
 
|
 
|
 
|N/A
 
|N/A
 +
|PPM
 
|Up
 
|Up
 
|
 
|
Line 163: Line 163:
 
|[[File:Fume Extractor.jpg|alt=Fume Extractor|none|thumb|200x200px]]
 
|[[File:Fume Extractor.jpg|alt=Fume Extractor|none|thumb|200x200px]]
 
|'''Fume Extractor'''
 
|'''Fume Extractor'''
−
|PPM
 
 
|PACE
 
|PACE
 
|8888-0825
 
|8888-0825
Line 169: Line 168:
 
|none
 
|none
 
|60112
 
|60112
 +
|PPM
 
|?
 
|?
 
|needs filters, probably
 
|needs filters, probably
Line 174: Line 174:
 
|[[File:3Doodler create.jpg|alt=3Doodler create|none|thumb|200x200px]]
 
|[[File:3Doodler create.jpg|alt=3Doodler create|none|thumb|200x200px]]
 
|'''3Doodler create'''
 
|'''3Doodler create'''
−
|PPM
 
 
|
 
|
 
|STAR TREK
 
|STAR TREK
Line 180: Line 179:
 
|
 
|
 
|
 
|
 +
|PPM
 
|
 
|
 
|
 
|
 
|-
 
|-
−
!Picture
+
|'''Picture'''
−
!'''Item'''
+
|'''Item'''
−
!'''Owner'''
+
|'''Manufacturer'''
−
!'''Manufacturer'''
+
|'''Model'''
−
!'''Model'''
 
 
'''Number'''
 
'''Number'''
−
!'''Estimated Value'''
+
|'''Estimated Value'''
−
!'''Manual'''
+
|'''Manual'''
−
!'''Serial'''
+
|'''Serial'''
 
'''Number'''
 
'''Number'''
−
!'''Status'''
+
|'''Owner'''
−
Up/Down
+
|'''Status'''
−
!'''Problem'''
+
'''Up/Down'''
 +
|'''Problem'''
 
'''Description'''
 
'''Description'''
 
|-
 
|-
 
|
 
|
 
|'''various Raspberry Pi boards'''
 
|'''various Raspberry Pi boards'''
−
|PPM
 
 
|
 
|
 
|
 
|
Line 206: Line 205:
 
|
 
|
 
|
 
|
 +
|PPM
 
|Working(?)
 
|Working(?)
  
Line 214: Line 214:
 
|'''Computer'''  
 
|'''Computer'''  
 
'''(Slicing machine)'''
 
'''(Slicing machine)'''
−
|PPM
 
 
|Custom
 
|Custom
 
|N/A
 
|N/A
Line 220: Line 219:
 
|N/A
 
|N/A
 
|M-DESIGN-5-G
 
|M-DESIGN-5-G
 +
|PPM
 
|Working(?)
 
|Working(?)
  
Line 228: Line 228:
 
|'''Computer'''  
 
|'''Computer'''  
 
'''(Resin machine)'''
 
'''(Resin machine)'''
−
|PPM
 
 
|Custom
 
|Custom
 
|N/A
 
|N/A
Line 234: Line 233:
 
|N/A
 
|N/A
 
|M-DESIGN-3-G
 
|M-DESIGN-3-G
 +
|PPM
 
|Working(?)
 
|Working(?)
  
Line 241: Line 241:
 
|
 
|
 
|'''3D Printer (high temp)'''
 
|'''3D Printer (high temp)'''
−
|PPM
 
 
|Stratasys
 
|Stratasys
 
|N/A
 
|N/A
Line 247: Line 246:
 
|N/A
 
|N/A
 
|N/A
 
|N/A
 +
|PPM
 
|Down
 
|Down
 
|Under construction
 
|Under construction
Line 252: Line 252:
 
|[[File:Monoprice.jpg|left|thumb|200x200px]]
 
|[[File:Monoprice.jpg|left|thumb|200x200px]]
 
|'''Monoprice Mini 3D Printer'''
 
|'''Monoprice Mini 3D Printer'''
−
|PPM
 
 
|Monoprice
 
|Monoprice
 
|Mini E3D Edition
 
|Mini E3D Edition
Line 258: Line 257:
 
|N/A
 
|N/A
 
|21711
 
|21711
 +
|PPM
 
| Down
 
| Down
 
|Not plugged in. Should work, needs to be tested.
 
|Not plugged in. Should work, needs to be tested.
Line 263: Line 263:
 
|[[File:Formlabs Form 2.jpg|alt=Formlabs Form 2 resin printer|none|thumb|200x200px]]
 
|[[File:Formlabs Form 2.jpg|alt=Formlabs Form 2 resin printer|none|thumb|200x200px]]
 
|'''Form 2 resin printer'''
 
|'''Form 2 resin printer'''
−
|PPM
 
 
|Form
 
|Form
 
|Form 2
 
|Form 2
Line 269: Line 268:
 
|Included
 
|Included
 
|ChemicalBear
 
|ChemicalBear
 +
|PPM
 
|Down
 
|Down
 
|Unable to get successful prints
 
|Unable to get successful prints
Line 275: Line 275:
 
|
 
|
 
|'''RapMan 3 3D Printer'''
 
|'''RapMan 3 3D Printer'''
−
|PPM
 
 
|Unknown
 
|Unknown
 
|RapMan 3
 
|RapMan 3
Line 281: Line 280:
 
|N/A
 
|N/A
 
|N/A
 
|N/A
 +
|PPM
 
|Down
 
|Down
 
|Needs board wired and powersupply hooked up.
 
|Needs board wired and powersupply hooked up.
 
|-
 
|-
−
!Picture
+
|'''Picture'''
−
!'''Item'''
+
|'''Item'''
−
!'''Owner'''
+
|'''Manufacturer'''
−
!'''Manufacturer'''
+
|'''Model'''
−
!'''Model'''
 
 
'''Number'''
 
'''Number'''
−
!'''Estimated Value'''
+
|'''Estimated Value'''
−
!'''Manual'''
+
|'''Manual'''
−
!'''Serial'''
+
|'''Serial'''
 
'''Number'''
 
'''Number'''
−
!'''Status'''
+
|'''Owner'''
−
Up/Down
+
|'''Status'''
−
!'''Problem'''
+
'''Up/Down'''
 +
|'''Problem'''
 
'''Description'''
 
'''Description'''
 
|}
 
|}

Revision as of 18:17, 20 November 2021

50x50px

The 3D Printing Area consists mostly of Level 2 equipment.

Additional training is required to use our Level 2 equipment.

Safety First

Covid-19 notice

Emergency Contacts:

In case of emergency, call 911

Personal Protective Equipment (PPE):

Wear gloves when using Isopropyl Alcohol and other cleaners.

3D Printing Classes/Training

For Help:

Message in PPM Slack channel #3d-printing

Trevor Banks, Area Captain

Introduction to 3D Printing

Intro to SLA 3D Printing

Equipment List

Picture Item Manufacturer Model

Number

Estimated Value Manual Serial

Number

Owner Status

Up/Down

Problem

Description

Prusa Mk2s

(Medussa)

Prusa Research N/A $1,000 Included N/A PPM Up
Prusa Mk2s

MMU2

Prusa Research Included N/A PPM Down MMU (Multi Material Unit) needs repair.

Under Warranty?

Prusa MK2S (Haywire) Prusa Research Prusa MK2S $350 Included N/A PPM Up Needs new bed and backup thermistors.
Taz 5

(Mr. T)

Lulzbot Taz 5 $1,200 Included N/A PPM Up
Taz 5

(Tizzy)

Lulzbot Taz 5 $1,200 Included N/A PPM Down Board may need to be replaced. PEI sheet broken in half.

Needs new sheet.

ANYCUBIC 3D Printer
Anycubic

Photon

resin printer

Anycubic N/A $200 N/A N/A PPM Up
UV Curing Box
UV curing box PPM Up Description:

6x 6x10 inches

Computer

(laptop)

hp EliteBook 8570w PPM Up
Dryer oven
lab oven / dryer w timer Curtin Matheson (none) PPM Up Description: ~12x12x12 interior
filament dryer box
filament dryer box N/A N/A N/A PPM Up
Fume Extractor
Fume Extractor PACE 8888-0825 none 60112 PPM ? needs filters, probably
3Doodler create
3Doodler create STAR TREK PPM
Picture Item Manufacturer Model

Number

Estimated Value Manual Serial

Number

Owner Status

Up/Down

Problem

Description

various Raspberry Pi boards PPM Working(?)

but not online

Computer

(Slicing machine)

Custom N/A $500 N/A M-DESIGN-5-G PPM Working(?)

but not online

Computer

(Resin machine)

Custom N/A $300 N/A M-DESIGN-3-G PPM Working(?)

but not online

3D Printer (high temp) Stratasys N/A $1,000 N/A N/A PPM Down Under construction
Monoprice.jpg
Monoprice Mini 3D Printer Monoprice Mini E3D Edition $75 N/A 21711 PPM Down Not plugged in. Should work, needs to be tested.
Formlabs Form 2 resin printer
Form 2 resin printer Form Form 2 $2,500 Included ChemicalBear PPM Down Unable to get successful prints

May need new resin.

RapMan 3 3D Printer Unknown RapMan 3 $100 N/A N/A PPM Down Needs board wired and powersupply hooked up.
Picture Item Manufacturer Model

Number

Estimated Value Manual Serial

Number

Owner Status

Up/Down

Problem

Description

Hand Tools

Hand tools that belong in the 3D Printing Area should be marked with orange tape or paint.

Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Policies

Materials:

Donate for 3D Print Filament: bit.ly/ppmstuff

Filament Cost $0.029 per Gram

Help Us Keep Stocked Up!

Leave required payments for filament in the black payment box, or use the QR code.

PPE:

Donate for PPE

Leave required payments for Personal Protective Equipment (PPE) in the black payment box, or use the QR code.

Scrap/Trash:

Separate scrap PLA and PETG plastics from Trash, so the plastics can be recycled.

Software

Modeling sw:

Fusion 360

Slicing sw:

PrusaSlicer

Lychee Slicer (free version)

Server sw:

Repetier-Server

Wish List

Filament Wanted:

TODO: Pursue filament donation from Make4Covid

Resin Wanted:

Castable resin received

Flexible received

Ceramic

Wax / lost resin

Upgrades:

Build or acquire a Filament Recycler

Donations Received

Donations Received

Showcase

Photo Gallery:

(Displayed in random order.)

  • Taz 5 display

  • 3D printed camera slider

    3D printed camera slider (PETG)

  • camera slider closeup

  • 3D Printed Lion

    3D Printed Lion (PLA)

  • 3D printed Nikola Tesla

    Tesla bust (PLA)

YouTube:

3D Printed Apple Tv Remote Grip by PPM member Ben Severson (2021)

"Things we've built", Created playlists, including 3D-printed robotic hand (2015)

Other Fun Stuff

"Wear you some gloves.", https://shop.crafnation.com/product/wearyousomegloves

Make QR Codes

Lithophane Links

Other Interesting Makerspace Wikis

Retrieved from "https://wiki.pikespeakmakerspace.org/index.php?title=3D_Printing&oldid=576"