Large Format Printing

From Pikes Peak Makerspace Wiki
Revision as of 19:34, 17 February 2023 by Warren (talk | contribs) (→‎Red Tags)
Jump to navigation Jump to search
Level 2 badge

The Large Format Printing Area at Pikes Peak Makerspace (PPM) consists mostly of Level 2 equipment.
Additional training is required to use our Level 2 equipment.



HP 510 Inkjet Printer
HP Designjet 510
4-Color Inkjet Printer
(12 April 2022)

Safety First

Members must know the following information:

In case of emergency, call 911.
Our physical location is:
735 East Pikes Peak Avenue
Colorado Springs, CO 80903
use this when ordering pizza or an ambulance

PPM Fire Escape Plan

Fire Escape Plan maps are posted throughout the Makerspace.
There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.

First Aid

There is a FIRST AID Supply Cabinet in our Kitchen Area.
FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.

Eye Wash Stations

Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.

Personal Protective Equipment (PPE)

Wear protective equipment in all Wood and Metal Shop Areas.
Wear gloves when using Isopropyl Alcohol and other cleaners.

Hazardous Chemicals

All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.
Review the Safety Data Sheet (SDS) information of unknown products before use.
SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.
Do not bring dangerous chemicals to the makerspace.
Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.
Please DO NOT paint indoors.



Impairment

The use of PPM equipment requires you to be alert, attentive, and focused.
Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.

Classes and Training

New Member Orientation

Area Captain -- Volunteers needed

To help out with the Large Format Printer, post your ideas/comments on Slack.
View all PPM Area Captains

Classes

Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup

Training

Be sure to log your printing job using the new Printer Usage Form.
Use the small power button on the front, lower left of the printer for an "Emergency Stop", if necessary.
Otherwise, to clear the printer, cycle the power using the power switch in the back, next to the power cord.
Plain paper is recyclable. (Photo paper and canvas are not.)


Warn.png The following pages contain historical information. The pages are provided for reference only.

Captured transcript of Large Format Printer Refresher video (by former PPM member Logan Henning):


Tips

- The media profile for "Canvas" does not allow cutting at the end of the job (or even manually), just use the scissors instead.
- If printer reports "Print Head Path Error 2", check the (Illustrator) file to see if it has elements that need to be trimmed to fit within the artboard.

For Additional Help

Use the #large-format-printer channel in Slack!

Equipment Lists

Large Format Printers

Picture Item Manufacturer Model
Number
Estimated
Value
Manual
HP Designjet 510
Large Format

4-Color

Inkjet Printer

Level 2 badge
hp

Designjet

510,

(416 MB memory upgrade)

?

HP website
3D printed spindle hub
2" spindle hub

(3D-printed)

Trevor Banks designed by

Trevor Banks

(04/12/22)

N/A
3D printed spindle hub adapter
3" to 2" spindle hub adapter

(3D-printed)

Trevor Banks designed by

Trevor Banks

(04/16/22)

N/A
Picture
Item
Manufacturer
Model
Number
Estimated
Value
Manual

Hand Tools

Use scissors to cut canvas, (the media profile "Canvas" does not allow cutting.)
Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Donations Received

Wish List

Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make.

Additional spindles and hubs for 3" diameter paper rolls

Benefits and Policies

PPM members enjoy discounts at the following local merchants:
(bring proof of membership)
Company Website Benefit Directions to
Logo WOODCRAFT
Woodcraft of Colorado Springs 10% discount    4438 Austin Bluffs Parkway
Logo CO Lumber
CO Lumber Specialties 10% discount 3636 Stone Avenue
Logo General Air
GENERAL AIR 10% discount 3031 N Nevada Ave.
Logo ACE
ACE Hardware Uintah Gardens 10% discount 1830 W Uintah Street
Map of stores that provide PPM member discounts
Map of helpful local resources curated by our makers
At home LightBurn subscriptions can be purchased at a discounted rate for being a PPM member.
The discount code is saved as a Pinned Message in our 'laser-cutter' channel in Slack.

Equipment Reservations

Materials

Cost
Butcher Paper $0.50 per foot
Matte Photo Paper $2.00 per foot
Canvas $5.00 per foot
Glossy Photo $5.00 per foot
Donate for Printing Materials: https://printing.cheddarup.com Use checkout for all payment methods.
If paying by cash, leave donations in a black payment box after login in Cheddar Up.
14", 24", and 30" (Fredrix brand) stretcher boards, stretcher tool and stapler for mounting canvas prints, cost TBD.

Large Format Printing Supplies

Item Weight Size Core Size

2 or 3 in

Quantity Recommendation Date
HP Everyday

Instant-Dry

Gloss Photo Paper

42" 2 in
1
5/12/22
HP Everyday Blockout

Display Film

36inx100ft 2 in
2

(1 unopened)

4/16/22
Presentation Grade

Matte Paper

36"
1
Bright White

Bond Paper

20lb 30"
1
Premium

Matte Paper

47lb 24"
1
Bright White

Bond Paper

20lb 33"
1
Bright White

Bond Paper

20lb 23.5"
3
Heavy Weight

Coated Paper

36"
1
Bright White

Bond Paper

20lb 24"
2
Translucent

Bond Paper

15lb 24"
1
Off White

Bond Paper

24"
1
Bright White

Bond Paper

20lb 36"
1
Bright White

Bond Paper

20lb 11"
4
Sell
Bright White

Bond Paper

20lb 11.5"
2
Sell
Translucent

Bond Paper

15lb 36"
6
Sell
Translucent

Bond Paper

15lb 48"
2
Sell -- too wide
Item
Weight
Size
Core Size
2 or 3 in
Quantity
Recommendation
Date

Red Tags

Scrap and Trash

Trash day is MONDAY
Recycling day is MONDAY (96 gallon tote)
Single Stream Recycling provided by Waste Connections. Paper, cardboard, cans, glass, and one time use plastics.
Empty recycling and trash into our dumpster at the back (south side) of the building.
Always leave the space better than you found it.

Software

Design Software

Adobe Illustrator
Adobe Photoshop
Adobe InDesign
CorelDRAW X6
Inkscape
Canva
Procreate

Printing Software

Adobe Acrobat
Preview -- Print directly from Macintosh applications, including Preview

Member Showcase

For even more member projects, visit our #showcase channel on Slack, or follow our social media links.

See Also

Links to other PPM Wiki pages (internal links):

Rotary Cutter
Computers
Printers

Curated Links

Links to other sites (external links):

HP DesignJet 510 42-in Printer - Manuals
HP Designjet 510 Series Printers - Specifications

Other Fun Stuff

Links to other sites (external links):

Consider Hofstadter's law



Search the PPM Wiki — include Content pages as well as Multimedia.

Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.