Sewing

From Pikes Peak Makerspace Wiki
Jump to navigation Jump to search
Level 1 badge

Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative process by providing shared space, shared tools, materials and a knowledge base to turn their ideas into reality.

PPM provides the sewing equipment and supplies listed below to its current members.


Warn.png The information on this page is incomplete.
Please post your suggestions on our Slack channel #ppm-wiki.


Safety First

Members must know the following information:

In case of emergency, call 911.
Our physical location is:
735 East Pikes Peak Avenue
Colorado Springs, CO 80903
use this when ordering pizza or an ambulance

PPM Fire Escape Plan

Fire Escape Plan maps are posted throughout the Makerspace.
There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.

First Aid

There is a FIRST AID Supply Cabinet in our Kitchen Area.
FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.

Eye Wash Stations

Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.

Personal Protective Equipment (PPE)

Wear protective equipment in all Wood and Metal Shop Areas.
Wear gloves when using Isopropyl Alcohol and other cleaners.

Hazardous Chemicals

All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.
Review the Safety Data Sheet (SDS) information of unknown products before use.
SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.
Do not bring dangerous chemicals to the makerspace.
Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.
Please DO NOT paint indoors.



Impairment

The use of PPM equipment requires you to be alert, attentive, and focused.
Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.

Classes and Training

New Member Orientation

Area Captain -- Volunteers needed

To help out with the Sewing Area at PPM, post your ideas/comments on Slack.
View all PPM Area Captains

Classes

Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup

Training

Be sure to log your printing job using the new Sewing Machine Usage Form.

For Additional Help

Use the PPM Slack channel:

#general

Equipment List

Picture Item Manufacturer Model Manual Estimated
Value
Owner
SINGER sewing machine
Sewing Machine
Level 1 badge
Singer Simple PPM
Picture
Item
Manufacturer
Model
Manual
Estimated
Value
Owner

Hand Tools

Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Donations Received

January 2023, Pavan Dayal, 5lb bag of assorted thread for new sewing machine, plus two bobbins

Wish List

Embroidery Machine
Industrial Sewing Machine

Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make.

Benefits and Policies

PPM members enjoy discounts at the following local merchants:
(bring proof of membership)
Company Website Benefit Directions to
Logo WOODCRAFT
Woodcraft of Colorado Springs 10% discount    4438 Austin Bluffs Parkway
Logo CO Lumber
CO Lumber Specialties 10% discount 3636 Stone Avenue
Logo General Air
GENERAL AIR 10% discount 3031 N Nevada Ave.
Logo ACE
ACE Hardware Uintah Gardens 10% discount 1830 W Uintah Street
Map of stores that provide PPM member discounts
Map of helpful local resources curated by our makers
At home LightBurn subscriptions can be purchased at a discounted rate for being a PPM member.
The discount code is saved as a Pinned Message in our 'laser-cutter' channel in Slack.

Equipment Reservations

Red Tags

Scrap and Trash

Trash day is MONDAY
Recycling day is MONDAY (96 gallon tote)
Single Stream Recycling provided by Waste Connections. Paper, cardboard, cans, glass, and one time use plastics.
Empty recycling and trash into our dumpster at the back (south side) of the building.
Always leave the space better than you found it.

Member Showcase



For even more member projects, visit our #showcase channel on Slack, or follow our social media links.

See Also

Links to other PPM Wiki pages (internal links):

Large Format Printing
Assembly Table

Curated Links

Links to other sites (external links):

Take High-Quality Product Photos
Composing Product Photos for Your Etsy Business

Other Fun Stuff

Links to other sites (external links):

Who Gives A SCRAP -- (local) art supply store



Search the PPM Wiki — include Content pages as well as Multimedia.

Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.