Metal Shop

The Metal Shop Area at Pikes Peak Makerspace (PPM) consists mostly of Level 3 equipment.

Additional training and certification is required to use any of our Level 3 equipment.

 Metal Shop Area  hand tools should be marked with pink tape or paint or powder coating.

Metal Shop Area

 Metal Shop Area  (03/15/22) 

Safety First

Members must know the following information:

In case of emergency, call 911.

Our physical location is:

735 East Pikes Peak Avenue

Colorado Springs, CO 80903

• 
  IN CASE OF
  EMERGENCY
  sign

PPM Fire Escape Plan

Fire Escape Plan maps are posted throughout the Makerspace.

There are 7 fire extinguishers on the fire escape plan map.

Review the PPM Fire Escape Plan for locations.

• 
  PPM Emergency
  Evacuation Plan.pdf
• 
  PPM Fire
  Prevention Plan.pdf
• 
  PPM Fire Escape
  Plan

First Aid

There is a FIRST AID Supply Cabinet in our Kitchen Area.

FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.

• 
  FIRST AID
  Supply Cabinet
• 
  FIRST AID
  Kit

Eye Wash Stations

Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.

• 
  Emergency
  Eye & Face Wash
  Station

Personal Protective Equipment (PPE)

Wear protective equipment in all Wood and Metal Shop Areas.

Wear gloves when using Isopropyl Alcohol and other cleaners.

Gloves should not be worn when using powered equipment (saws, jointers, drills, or other equipment). Leather gloves can be worn for handling materials, but not when operating machinery.

• 
  Personal Protective Equipment (PPE)

Hazardous Chemicals

All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.

Review the Safety Data Sheet (SDS) information of unknown products before use.

SDS information is available via this spreadsheet.

Do not bring dangerous chemicals to the makerspace.

Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.

Please DO NOT paint indoors.

• 
  Flammables Cabinet
  in the Vented Room

Other Hazards

Avoid placing uncovered (extension) cords, hoses, cables, or wires across the floors of our shops.

Impairment

The use of PPM equipment requires you to be alert, attentive, and focused.

Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.

Classes and Training

Area Captain -- Trevor Banks

View all PPM Area Captains

Area Captain Duties

To help out in the Metal Shop, contact the Area Captain on Slack.

Classes

Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup

Training

Evolution Power Tools -- on YouTube

Tips

Before using air tools add 1 drop of air tool oil

For Additional Help

Use the PPM Slack channel #metal-shop

Equipment Lists

Metal Shop Equipment

Picture	Item	Manufacturer	Model Number	Estimated Value	Manual	Owner	Status
	drill press	ROCKWELL	DG08	$500	no	PPM (donated by Qualtek Manufacturing)
	metal band saw	DoALL	M602	$500	no	PPM (donated by Qualtek Manufacturing)	Working
	evolution Metal Cutting Chop Saw 14" blade	evolution POWER TOOLS	evoSAW	?	yes	PPM	FULLY FUNCTIONING
	5 in. Bench Grinder on stand	CRAFTSMAN		?		PPM
6in Bench Grinder	6 in. Bench Grinder on stand	CRAFTSMAN		?		PPM	2 new grinding wheels, (12/13/21)
	30" BENDING BRAKE	CENTRAL MACHINERY	61791	$70	Owner's Manual	PPM (donated by Josh Harlow)	working
	vacuum former	PLAST-O-CRAFT		?		?	working (12/10/22)
	TOOL PRESS 1/2 TON	JANESVILLE	ILP-500	$386	ON LINE	PPM	FULLY FUNCTIONING
	METAL BAND SAW (horizontal)	WELLS	Wellsaw 58B	?	Review	?	?
	parts washer with pump (20 gallon)	CENTRAL MACHINERY	60769	$128	Owner's Manual	PPM (donated by Qualtek Manufacturing)	not yet installed (02/21/22)
Picture	Item	Manufacturer	Model Number	Estimated Value	Manual	Owner	Status

• DOALL Saw Length
  DOALL band saw
  Saw Length
• 
  DG08 Rockwell
  drill press nameplate
• Parts washer label
  Parts washer
  label

Lathe Equipment

Picture	Item	Manufacturer	Model Number	Estimated Value	Manual	Owner
Grizzly Lathe	combination machine (Mill)	Grizzly logo	Grizzly G0516	?	online	Bill Epperson
Grizzly Lathe	combination machine (Lathe)	Grizzly logo	Grizzly G0516	?	online	Bill Epperson
File:Tool cabinet.jpg	tool cabinet	U.S. General		?		Bill Epperson
Picture	Item	Manufacturer	Model Number	Estimated Value	Manual	Owner

• Grizzly G0516 WARNING
  Grizzly G0516 Mill/Drill/Lathe
  WARNING

Hand Tools

Picture	Item	Manufacturer	Model Number	Estimated Value	Owner
	vise grips				PPM
	Drill Bit Set, 29 pieces, Titanium	Milwaukee	48-89-4632	$129	PPM
	Punch Set in plastic case	Wheeler	link	$30	PPM
Picture	Item	Manufacturer	Model Number	Estimated Value	Owner

 Metal Shop Area  hand tools should be marked with pink tape or paint or powder coating.

Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Wish List

Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make.

Benefits and Policies

PPM members enjoy discounts at the following local merchants:

(bring proof of PPM membership)

Website	Benefit	Address
Woodcraft of Colorado Springs	10% discount	4438 Austin Bluffs Parkway
CO Lumber Specialties	10% discount	3636 Stone Avenue
GENERAL AIR	10% discount	3031 N Nevada Ave.
ACE Hardware Uintah Gardens	10% discount	1830 W Uintah Street

Materials

Donate for "General Supplies" via PayPal: bit.ly/ppmstuff

Or, leave donations in a black payment box, or use a QR code.

Red Tags

Use a Red Tag, which can be found in the red tag area, to designate broken equipment.

Scrap and Trash

Trash day is TUESDAY (Extra pickups can be called from Waste Connections for around $75)

Recycling day is MONDAY (96 gallon tote should be placed out back by the dumpster)

Single Stream Recycling provided by Waste Connections. Paper, cardboard, cans, glass, and one time use plastics.

Empty interior trash cans into our dumpster at the back (south side) of the building.

Always leave the space better than you found it.

Software

Links to other PPM Wiki pages (internal links):

Fusion 360

See Also

Links to other PPM Wiki pages (internal links):

Sandblasting Cabinet

Powder Coating

Powder Coating Area

Welding Area

Shed

Curated Links

Links to other sites (external links):

Jamie Hyneman On Welding in His Workshop

Other Fun Stuff

Links to other sites (external links):

Adam Savage's Guide to Drill Bits!

---

Search the PPM Wiki — include Content pages as well as Multimedia.

Contact Us if you cannot find your answer here on our Wiki or if you notice any outdated information.