Difference between revisions of "3D Printing"
Jump to navigation
Jump to search
(Reserve Equipment) |
|||
| Line 28: | Line 28: | ||
===Tips=== | ===Tips=== | ||
| − | :Clear the resin trays carefully and completely to avoid cross-contamination. | + | :Clear the resin trays of the SLA printers carefully and completely to avoid cross-contamination. |
:[https://www.simplify3d.com/support/materials-guide/#all '''Ultimate 3D Printing Materials Guide'''] | :[https://www.simplify3d.com/support/materials-guide/#all '''Ultimate 3D Printing Materials Guide'''] | ||
:'''[https://www.youtube.com/channel/UCLHAxAdvAKJY0niRJZRYMvg Prusa 3D by Josef Prusa] - YouTube channel''' | :'''[https://www.youtube.com/channel/UCLHAxAdvAKJY0niRJZRYMvg Prusa 3D by Josef Prusa] - YouTube channel''' | ||
| Line 45: | Line 45: | ||
!'''Status<br>Up/Down''' | !'''Status<br>Up/Down''' | ||
!'''Problem<br>Description''' | !'''Problem<br>Description''' | ||
| + | |- | ||
| + | | | ||
| + | |'''Prusa MK2S''' | ||
| + | '''(Haywire)''' | ||
| + | |[https://www.prusa3d.com/ PRUSA RESEARCH] | ||
| + | |Prusa MK2S | ||
| + | |<p style="text-align:right;">$350</p> | ||
| + | |Included | ||
| + | |PPM | ||
| + | |Down | ||
| + | (12/10/21) | ||
| + | |Thermal Runaway. | ||
| + | Needs new bed and backup thermistors. | ||
|- | |- | ||
| | | | ||
| Line 54: | Line 67: | ||
|Included | |Included | ||
|PPM | |PPM | ||
| − | | | + | |Up |
| + | (12/10/21) | ||
| | | | ||
|- | |- | ||
| Line 66: | Line 80: | ||
|PPM | |PPM | ||
|Down | |Down | ||
| + | (12/10/21) | ||
|MMU (Multi Material Unit) needs repair. | |MMU (Multi Material Unit) needs repair. | ||
<s>Under Warranty?</s> | <s>Under Warranty?</s> | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
|- | |- | ||
|[[File:MR T.jpg|alt=MR T 3D printer|center|frameless|200x200px]] | |[[File:MR T.jpg|alt=MR T 3D printer|center|frameless|200x200px]] | ||
| Line 116: | Line 120: | ||
|[[File:UV Curing Box.jpg|alt=UV Curing Box|200x200px|center|frameless]] | |[[File:UV Curing Box.jpg|alt=UV Curing Box|200x200px|center|frameless]] | ||
|'''UV curing box''' | |'''UV curing box''' | ||
| + | (6x6x10 inches) | ||
|PPM | |PPM | ||
| | | | ||
| Line 122: | Line 127: | ||
|PPM | |PPM | ||
|Up | |Up | ||
| − | | | + | | |
| − | |||
|- | |- | ||
|[[File:Dryer oven.jpg|alt=Dryer oven|200x200px|center|frameless]] | |[[File:Dryer oven.jpg|alt=Dryer oven|200x200px|center|frameless]] | ||
|'''lab oven / dryer''' | |'''lab oven / dryer''' | ||
'''with timer''' | '''with timer''' | ||
| + | |||
| + | (12x12x12 interior) | ||
|Curtin Matheson | |Curtin Matheson | ||
| | | | ||
| Line 134: | Line 140: | ||
|PPM | |PPM | ||
|Up | |Up | ||
| − | | | + | | |
|- | |- | ||
|[[File:Filament dryer box.jpg|alt=filament dryer box|200x200px|center|frameless]] | |[[File:Filament dryer box.jpg|alt=filament dryer box|200x200px|center|frameless]] | ||
| Line 238: | Line 244: | ||
| | | | ||
| | | | ||
| − | | | + | |<p style="text-align:right;">?</p> |
| | | | ||
|PPM | |PPM | ||
| Line 248: | Line 254: | ||
| | | | ||
|'''computer''' | |'''computer''' | ||
| − | '''(Resin machine)''' | + | '''(Resin machine),''' |
| − | | | + | |
| − | | | + | "M-DESIGN-5-G" |
| + | | | ||
| + | | | ||
|<p style="text-align:right;">$300</p> | |<p style="text-align:right;">$300</p> | ||
|N/A | |N/A | ||
| Line 256: | Line 264: | ||
|Working(?) | |Working(?) | ||
| − | but not online | + | but not online, Windows 10 |
| | | | ||
|- | |- | ||
| | | | ||
|'''computer''' | |'''computer''' | ||
| − | '''(Slicing machine)''' | + | '''(Slicing machine),''' |
| − | | | + | |
| − | | | + | '''"M-DESIGN-3-G"''' |
| + | |hp | ||
| + | |Z200 | ||
|<p style="text-align:right;">$500</p> | |<p style="text-align:right;">$500</p> | ||
|N/A | |N/A | ||
|PPM | |PPM | ||
| − | | | + | |Up |
| − | + | |Windows 7 | |
| − | |||
| − | | | ||
|- | |- | ||
| | | | ||
| Line 293: | Line 301: | ||
|- | |- | ||
|[[File:Monoprice.jpg|200x200px|alt=|center|frameless]] | |[[File:Monoprice.jpg|200x200px|alt=|center|frameless]] | ||
| − | |'''Monoprice Mini 3D Printer''' | + | |'''Monoprice Mini 3D Printer''' |
|Monoprice | |Monoprice | ||
|Mini E3D Edition | |Mini E3D Edition | ||
| Line 300: | Line 308: | ||
|PPM | |PPM | ||
|Down | |Down | ||
| − | |Not plugged in. Should work, needs to be tested. | + | |Not plugged in. Should work, needs to be tested. |
| + | SD card only. PLA ONLY. | ||
|- | |- | ||
|[[File:Formlabs Form 2.jpg|alt=Formlabs Form 2 resin printer|200x200px|center|frameless]] | |[[File:Formlabs Form 2.jpg|alt=Formlabs Form 2 resin printer|200x200px|center|frameless]] | ||
| Line 311: | Line 320: | ||
|PPM | |PPM | ||
|Down | |Down | ||
| − | |Unable to get successful prints. | + | |Unable to get successful prints. May need new resin. |
| − | May need new resin. | ||
|- | |- | ||
| | | | ||
Revision as of 18:12, 10 December 2021
The 3D Printing Area at Pikes Peak Makerspace consists mostly of Level 2 equipment.
Additional training is required to use our Level 2 equipment.
3D Printing Area hand tools should be marked with orange tape or paint.
Safety First
Members must know the following information:
- In case of emergency, call 911.
- Our physical location is:
- 735 East Pikes Peak Avenue
- Colorado Springs, CO 80903
- use this when ordering pizza or an ambulance
IN CASE OF
EMERGENCY
sign
PPM Fire Escape Plan
- Fire Escape Plan maps are posted throughout the Makerspace.
- There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.
PPM Emergency
Evacuation Plan.pdf
PPM Fire
Prevention Plan.pdf
PPM Fire Escape
Plan
First Aid
- There is a FIRST AID Supply Cabinet in our Kitchen Area.
- FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.
FIRST AID
Supply Cabinet
FIRST AID
Kit
Eye Wash Stations
- Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.
Emergency
Eye & Face Wash
Station
Personal Protective Equipment (PPE)
- Wear protective equipment in all Wood and Metal Shop Areas.
- Wear gloves when using Isopropyl Alcohol and other cleaners.
Personal Protective Equipment (PPE)
Hazardous Chemicals
- All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.
- Review the Safety Data Sheet (SDS) information of unknown products before use.
- SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.
- Do not bring dangerous chemicals to the makerspace.
- Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.
- Please DO NOT paint indoors.
Flammables Cabinet
in the Vented Room
Impairment
- The use of PPM equipment requires you to be alert, attentive, and focused.
- Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.
3D Printing Classes and Training
Area Captain
- Trevor Banks
Classes
- Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup
Training
- Introduction to 3D Printing class info
- Intro to SLA 3D Printing class info
For Help
- Message in PPM Slack channel #3d-printing
Tips
- Clear the resin trays of the SLA printers carefully and completely to avoid cross-contamination.
- Ultimate 3D Printing Materials Guide
- Prusa 3D by Josef Prusa - YouTube channel
Equipment Lists
| Picture | Item | Manufacturer | Model Number |
Estimated Value |
Manual | Owner | Status Up/Down |
Problem Description |
|---|---|---|---|---|---|---|---|---|
| Prusa MK2S
(Haywire) |
PRUSA RESEARCH | Prusa MK2S | $350 |
Included | PPM | Down
(12/10/21) |
Thermal Runaway.
Needs new bed and backup thermistors. | |
| Prusa Mk2s
(Medussa) |
PRUSA RESEARCH | N/A | $1,000 |
Included | PPM | Up
(12/10/21) |
||
| Prusa Mk2s
MMU2 |
PRUSA RESEARCH | Included | PPM | Down
(12/10/21) |
MMU (Multi Material Unit) needs repair.
| |||
| Taz 5
(MR. T) |
LULZBOT | Taz 5 | $1,200 |
Included | PPM | Down | ||
| Taz 5
(TIZZY) |
LULZBOT | Taz 5,
KITTAZ |
$1,200 |
Included | PPM | Down | Under Repair (12/06/21) | |
 |
ANYCUBIC PHOTON MONO 2K
resin printer |
Anycubic | N/A | $200 |
N/A | PPM | Up | |
 |
UV curing box
(6x6x10 inches) |
PPM | PPM | Up | ||||
 |
lab oven / dryer
with timer (12x12x12 interior) |
Curtin Matheson | (none) | PPM | Up | |||
 |
filament dryer box | PPM | N/A | PPM | Up | |||
 |
Fume Extractor | PACE | 8888-0825 | none | PPM | ? | needs filters, probably | |
 |
3Doodler create | STAR TREK | PPM | |||||
 |
INFRARED THERMOMETER | CEN-TECH | PPM | Up | ||||
| Picture | Item | Manufacturer | Model Number |
Estimated Value |
Manual | Owner | Status Up/Down |
Problem Description |
| Picture | Item | Manufacturer | Model Number |
Estimated Value |
Manual | Owner | Status Up/Down |
Problem Description |
|---|---|---|---|---|---|---|---|---|
| computer
(laptop) |
hp | EliteBook 8570w | PPM | Up | ||||
| Picture | Item | Manufacturer | Model Number |
Estimated Value |
Manual | Owner | Status Up/Down |
Problem Description |
| Picture | Item | Manufacturer | Model Number |
Estimated Value |
Manual | Owner | Status
Up/Down |
Problem Description |
|---|---|---|---|---|---|---|---|---|
| various Raspberry Pi boards | ? |
PPM | Working(?)
but not online |
|||||
| computer
(Resin machine), "M-DESIGN-5-G" |
$300 |
N/A | PPM | Working(?)
but not online, Windows 10 |
||||
| computer
(Slicing machine), "M-DESIGN-3-G" |
hp | Z200 | $500 |
N/A | PPM | Up | Windows 7 | |
| hot air material (pellet) dryer | Plastic Process Equipment | THD-U SERIES | ? |
Yes | PPM (donated by TITAN ROBOTICS) | Down | Under construction | |
| 3D Printer (high temp) |
Stratasys | N/A | $1,000 |
N/A | PPM (donated by TITAN ROBOTICS) | Down | Under construction | |
| Monoprice Mini 3D Printer | Monoprice | Mini E3D Edition | $75 |
N/A | PPM | Down | Not plugged in. Should work, needs to be tested.
SD card only. PLA ONLY. | |
 |
Form 2
resin printer |
Form | Form 2 | $2,500 |
Included | PPM | Down | Unable to get successful prints. May need new resin. |
| RapMan 3
3D Printer |
Unknown | RapMan 3 | $100 |
N/A | PPM | Down | Needs board wired and power supply hooked up. | |
| Picture | Item | Manufacturer | Model Number |
Estimated Value |
Manual | Owner | Status Up/Down |
Problem Description |
Hand Tools
- Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.
Donations Received
Wish List
Policies
PPE
- Donate for PPE
- Or, leave donations in a black payment box, or use a QR code.
Reserve Equipment
Materials
- Donate for "3D Print Filament": bit.ly/ppmstuff
- Filament Cost $0.029 per Gram
- Or, leave donations in a black payment box, or use a QR code.
Scrap and Trash
- Separate scrap PLA and PETG plastics from Trash, so the plastics can be recycled.
Software
Modeling sw
- Fusion 360
Slicing sw
- Lychee Slicer (free version) for ANYCUBIC resin printer
Server sw
Showcase
Photo Gallery
- (Displayed in random order.)
Taz 5 display 
3D printed camera slider
(PETG)
camera slider closeup 
3D Printed Lion
(PLA)
Tesla bust
8 inch tall (PLA)
Filament dryer box 
Toilet paper holder 
3D Printed open-source
prosthetic/robotic hand
PPM YouTube Channel
- "featured" videos, (the YouTube "HOME" tab)
- "Things we've built", Created playlists, including 3D-printed robotic hand (2015)
Other Fun Stuff
"Wear you some gloves.", https://shop.crafnation.com/product/wearyousomegloves