3D Printing -- Resin

The 3D Printing Area at Pikes Peak Makerspace (PPM) consists mostly of Level 2 equipment.

Additional PPM training is required to use any of our Level 2 equipment.

Our trainers are passionate about sharing their knowledge and ensuring a positive learning experience for all.

We are grateful for their commitment and dedication to our community.

3D Printing Area hand tools should be marked with orange tape or paint.

 

Safety First

Members must know the following information:

In case of emergency, call 911.

Our physical location is:

735 East Pikes Peak Avenue

Colorado Springs, CO 80903

use this when ordering pizza or an ambulance

• 

  IN CASE OF
  EMERGENCY
  sign

PPM Fire Escape Plan

Fire Escape Plan maps are posted throughout the Makerspace.

There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.

• 

  PPM Emergency
  Evacuation Plan.pdf

• 

  PPM Fire
  Prevention Plan.pdf

• 

  PPM Fire Escape
  Plan

First Aid

There is a FIRST AID Supply Cabinet in our Kitchen Area.

FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.

• 

  FIRST AID
  Supply Cabinet

• 

  FIRST AID
  Kit

Eye Wash Stations

Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.

• 

  Emergency
  Eye & Face Wash
  Station

Personal Protective Equipment (PPE)

Wear protective equipment in all Wood and Metal Shop Areas.

Wear gloves when using Isopropyl Alcohol and other cleaners.

• 

  Personal Protective Equipment (PPE)

Hazardous Chemicals

All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.

Review the Safety Data Sheet (SDS) information of unknown products before use.

SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.

Do not bring dangerous chemicals to the makerspace.

Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.

Please DO NOT paint indoors.

• 

  Flammables Cabinet
  in the Vented Room

Impairment

The use of PPM equipment requires you to be alert, attentive, and focused.

Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.

 

Classes and Training

Area Leader — Chris MacNicol

To help out in the 3D Printing Area contact the Area Leader on Slack.

Classes

PPM announces all its Upcoming events, including classes, on Meetup

Training

FDM vs SLA 3D Printing — according to the "new Bing"

"FDM and SLA are two different types of 3D printing technologies that use different materials and methods to create parts. FDM stands for fused deposition modeling, and SLA stands for stereolithography. Here are some of the main differences between them:

FDM uses a heated nozzle to extrude melted plastic filament one layer at a time on a build platform. SLA uses a UV laser to cure liquid resin one layer at a time in a resin tank.

FDM can print with a variety of thermoplastic materials, such as ABS, PLA, PETG, and nylon. SLA can print with different types of resin materials, such as standard, engineering, and dental resins.

FDM has more color options and similar strength in the X and Y directions than SLA. SLA has better surface finish, detail, and speed than FDM.

FDM is cheaper, more user-friendly, and more reliable than SLA. SLA is more expensive, requires more post-processing, and is more sensitive to environmental factors than FDM.

FDM is suitable for basic proof-of-concept models, quick and low-cost prototyping, and simple parts that might be machined. SLA is ideal for high-detail parts, molds, patterns, and functional parts that require tight tolerances and smooth surfaces."

Intro to SLA 3D Printing

Anycubic resin settings

Be sure to log your SLA printing job using the Printer Usage Form.

Clear the resin trays of the SLA printers carefully and completely to avoid cross-contamination.

Equipment Lists

3D Printing Equipment

Picture	Item	Manufacturer/ Model Number	Print Volume	Upgrades	Reference Materials
	Resin Printer	Anycubic Photon Mono 4k	163 x 102 x 180 mm tall		All You Need to Know
	Resin Printer	Anycubic PHOTON MONO 2K	163 x 102 x 180 mm tall	magnetic bed
	Wash Station				Anycubic
	Curing Station				Anycubic

3D Printing Equipment — Other

Picture	Item	Manufacturer	Specifications	Reference Materials
	UV curing box	PPM	(6x6x10 inches)
	Fume Extractor	PACE 8888-0825		MANUAL (pdf)

3D Printing — Computers  

Item	Application Software	Manufacturer/ Model	CPU	Memory/ Storage	System Software
computer (Resin machine), "M-DESIGN-5-G"	PrusaSlicer Lychee Slicer Repetier‑Server				Microsoft Windows 10

Hand Tools

• 

  INFRARED THERMOMETER

3D Printing Area hand tools should be marked with orange tape or paint.

Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Donations Received

Wish List

Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make.

Benefits

PPM members enjoy discounts at the following local merchants:

(bring proof of membership)

Company	Website	Benefit	Directions to
	Woodcraft of Colorado Springs	10% discount	4438 Austin Bluffs Parkway
	CO Lumber Specialties	10% discount	3636 Stone Avenue
	GENERAL AIR	10% discount	3031 N Nevada Ave.
	ACE Hardware Uintah Gardens	10% discount	1830 W Uintah Street

Map of stores that provide PPM member discounts

Map of helpful local resources curated by our makers

At home LightBurn subscriptions can be purchased at a discounted rate for being a PPM member.

The discount code is saved as a Pinned Message in our 'laser-cutter' channel in Slack.

Policies

Materials

PPE

Donate for PPE

Or, leave donations in a black payment box, or use a QR code.

Red Tags

If equipment needs repairs, place a Red Tag on it and report it via the Pikes Peak Makerspace Slack channel #red-tags-issues

This advises others on the malfunctioning equipment and ensures that actions can be taken to service/repair the equipment.Scrap and Trash

Trash day is MONDAY

Recycling day is MONDAY (96 gallon tote)

Single Stream Recycling provided by Waste Connections. Paper, cardboard, cans, glass, and one time use plastics.

Empty recycling and trash into our dumpster at the back (south side) of the building.

Always leave the space better than you found it.

Related Software

Modeling software

Autodesk Fusion 360 — integrated, cloud-based CAD and CAM software

Blender — for creating 3D printed models (and much more)

Slicing software

Lychee Slicer — (free version) for ANYCUBIC resin printer.

Related Pages

Links to related PPM Wiki pages:

  3D Printing — Filament (FDM)  

  Computers  

Lychee Slicer Tips

Autodesk Fusion 360 Tips

Blender Tips

Curated Links

Links to member-recommended external sites:

Anycubic Community

3D Printer Resins — on MatterHackers

Awesome 3D Printing — on GitHub

35 Best Resin Printer Files in 2023

For Additional Help

Use the PPM Slack channel #3d-printing

List of all PPM Slack channels

Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the community.

Search the PPM Wiki — include Content pages as well as Multimedia.

Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.

 

Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative processes by providing shared space, shared tools, materials, software, and a knowledge base to turn their ideas into reality.