Difference between revisions of "3D Printing -- Resin"

Revision as of 19:04, 20 July 2023

Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative process by providing shared space, shared tools, software, materials and a knowledge base to turn their ideas into reality.

The 3D Printing Area at PPM consists mostly of Level 2 equipment.

Additional training is required to use our Level 2 equipment.

3D Printing Area hand tools should be marked with orange tape or paint.

Safety First

Members must know the following information:

In case of emergency, call 911.

Our physical location is:

735 East Pikes Peak Avenue

Colorado Springs, CO 80903

use this when ordering pizza or an ambulance

IN CASE OF
EMERGENCY
sign

PPM Fire Escape Plan

Fire Escape Plan maps are posted throughout the Makerspace.

There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.

PPM Emergency
Evacuation Plan.pdf
PPM Fire
Prevention Plan.pdf
PPM Fire Escape
Plan

First Aid

There is a FIRST AID Supply Cabinet in our Kitchen Area.

FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.

FIRST AID
Supply Cabinet
FIRST AID
Kit

Eye Wash Stations

Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.

Emergency
Eye & Face Wash
Station

Personal Protective Equipment (PPE)

Wear protective equipment in all Wood and Metal Shop Areas.

Wear gloves when using Isopropyl Alcohol and other cleaners.

Personal Protective Equipment (PPE)

Hazardous Chemicals

All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.

Review the Safety Data Sheet (SDS) information of unknown products before use.

SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.

Do not bring dangerous chemicals to the makerspace.

Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.

Please DO NOT paint indoors.

Flammables Cabinet
in the Vented Room

Impairment

The use of PPM equipment requires you to be alert, attentive, and focused.

Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.

Classes and Training

New Member Orientation

Area Leader — Chris MacNicol

To help out in the 3D Printing Area contact the Area Leader on Slack.

Classes

Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup

Our classes are run by dedicated volunteers who generously offer their time and expertise. As a result, class schedules and availability may be subject to change and limitations from time to time.

Please know that our volunteers are passionate about sharing their knowledge and ensuring a positive learning experience for all. We are grateful for their commitment and dedication to our community. Together, we can create a supportive, cooperative, and understanding community!

Training

FDM vs SLA 3D Printing — according to the "new Bing"

"FDM and SLA are two different types of 3D printing technologies that use different materials and methods to create parts. FDM stands for fused deposition modeling, and SLA stands for stereolithography. Here are some of the main differences between them:

FDM uses a heated nozzle to extrude melted plastic filament one layer at a time on a build platform. SLA uses a UV laser to cure liquid resin one layer at a time in a resin tank.

FDM can print with a variety of thermoplastic materials, such as ABS, PLA, PETG, and nylon. SLA can print with different types of resin materials, such as standard, engineering, and dental resins.

FDM has more color options and similar strength in the X and Y directions than SLA. SLA has better surface finish, detail, and speed than FDM.

FDM is cheaper, more user-friendly, and more reliable than SLA. SLA is more expensive, requires more post-processing, and is more sensitive to environmental factors than FDM.

FDM is suitable for basic proof-of-concept models, quick and low-cost prototyping, and simple parts that might be machined. SLA is ideal for high-detail parts, molds, patterns, and functional parts that require tight tolerances and smooth surfaces."

Intro to SLA 3D Printing — class info

Be sure to log your SLA printing job using the Printer Usage Form.

Clear the resin trays of the SLA printers carefully and completely to avoid cross-contamination.

For Additional Help

Use the PPM Slack channel #3d-printing

List of all PPM Slack channels

Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the community.

Equipment Lists

3D Printing Equipment

Picture	Item	Manufacturer	Model Number	Print Volume	Upgrades
	Resin Printer	Anycubic	Photon Mono 4k	163 x 102 x 180 mm tall
	Resin Printer	Anycubic	PHOTON MONO 2K	163 x 102 x 180 mm tall	magnetic bed
Picture	Item	Manufacturer	Model Number	Print Volume	Upgrades

3D Printing Equipment — Other

Picture	Item	Manufacturer
	Wash and Cure machine (2.0)	Anycubic

	UV curing box (6x6x10 inches)	PPM
	Fume Extractor	PACE 8888-0825
Picture	Item	Manufacturer

3D Printing — Computers

Picture	Item	Application Software	Manufacturer/ Model	CPU	Memory/ Storage	System Software
	computer (Resin machine), "M-DESIGN-5-G"	PrusaSlicer Lychee Slicer Repetier‑Server				Windows 10
Picture	Item	Application Software	Manufacturer/ Model	CPU	Memory/ Storage	System Software

Hand Tools

INFRARED THERMOMETER

3D Printing Area hand tools should be marked with orange tape or paint.

Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Donations Received

Wish List

Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make.

Benefits and Policies

PPM members enjoy discounts at the following local merchants:

(bring proof of membership)


Company	Website	Benefit	Directions to
	Woodcraft of Colorado Springs	10% discount	4438 Austin Bluffs Parkway
	CO Lumber Specialties	10% discount	3636 Stone Avenue
	GENERAL AIR	10% discount	3031 N Nevada Ave.
	ACE Hardware Uintah Gardens	10% discount	1830 W Uintah Street

Map of stores that provide PPM member discounts

Map of helpful local resources curated by our makers

At home LightBurn subscriptions can be purchased at a discounted rate for being a PPM member.

The discount code is saved as a Pinned Message in our 'laser-cutter' channel in Slack.

Equipment Reservations

PPE

Donate for PPE

Or, leave donations in a black payment box, or use a QR code.

Materials

Red Tags

If equipment needs repairs, place a Red Tag on it and report it via the Pikes Peak Makerspace Slack channel #red-tags-issues

This advises others on the malfunctioning equipment and ensures that actions can be taken to service/repair the equipment.

Scrap and Trash

Trash day is MONDAY

Recycling day is MONDAY (96 gallon tote)

Single Stream Recycling provided by Waste Connections. Paper, cardboard, cans, glass, and one time use plastics.

Empty recycling and trash into our dumpster at the back (south side) of the building.

Always leave the space better than you found it.

Related Software

Modeling sw

Autodesk Fusion 360 — integrated, cloud-based CAD and CAM software

Blender — for creating 3D printed models (and much more)

Slicing sw

Lychee Slicer — (free version) for ANYCUBIC resin printer.

Member Showcase

Images needed

For even more member projects, visit our #showcase channel on Slack, or follow our social media links.

Curated Links

Links to external sites:

Awesome 3D Printing — on GitHub

Other Fun Stuff