Photography Area

Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative process by providing shared space, shared tools, materials and a knowledge base to turn their ideas into reality.

Our members have built a large but portable table with seamless backdrop and lighting to use for product photography.

By large we mean the surface is a full 4'x8' sheet of plywood. (PPM does not have any cameras or darkroom facilities.)

File:Photography Area.jpg

Photography Area
(26 November 2021)

Safety First

Members must know the following information:

In case of emergency, call 911.

Our physical location is:

735 East Pikes Peak Avenue

Colorado Springs, CO 80903

use this when ordering pizza or an ambulance

• 

  IN CASE OF
  EMERGENCY
  sign

PPM Fire Escape Plan

Fire Escape Plan maps are posted throughout the Makerspace.

There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.

• 

  PPM Emergency
  Evacuation Plan.pdf

• 

  PPM Fire
  Prevention Plan.pdf

• 

  PPM Fire Escape
  Plan

First Aid

There is a FIRST AID Supply Cabinet in our Kitchen Area.

FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.

• 

  FIRST AID
  Supply Cabinet

• 

  FIRST AID
  Kit

Eye Wash Stations

Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.

• 

  Emergency
  Eye & Face Wash
  Station

Personal Protective Equipment (PPE)

Wear protective equipment in all Wood and Metal Shop Areas.

Wear gloves when using Isopropyl Alcohol and other cleaners.

• 

  Personal Protective Equipment (PPE)

Hazardous Chemicals

All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.

Review the Safety Data Sheet (SDS) information of unknown products before use.

SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.

Do not bring dangerous chemicals to the makerspace.

Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.

Please DO NOT paint indoors.

• 

  Flammables Cabinet
  in the Vented Room

Impairment

The use of PPM equipment requires you to be alert, attentive, and focused.

Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.

Classes and Training

Area Captain -- Volunteers needed

To help out with the Photography Area at PPM, post your ideas and comments on Slack.

Classes

Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup

Tips

Proper lighting is critical in photography, including product photography.

For Additional Help

Use the PPM Slack channel #general (or #showcase)

Equipment Lists

Lights

Picture	Item	Manufacturer	Model Number	Estimated Value	Owner	Status Up/Down	Problem Description
	overhead light			?	PPM	Up
	light source	westcott		?	PPM	Up
	light deflector	LimoStudio		?	PPM	Up
	box light	LimoStudio		?	PPM	Up
Picture	Item	Manufacturer	Model Number	Estimated Value	Owner	Status Up/Down	Problem Description

Hardware

Picture	Item	Manufacturer	Model Number	Estimated Value	Owner	Status Up/Down	Problem Description
	Display Turntable			?	?	Up
	turntable			?	PPM	Up
	tripod	Velbon	S-600	?	PPM	Up
Picture	Item	Manufacturer	Model Number	Estimated Value	Owner	Status Up/Down	Problem Description

Benefits and Policies

PPM members enjoy discounts at the following local merchants:

(bring proof of membership)

Company	Website	Benefit	Directions to
	Woodcraft of Colorado Springs	10% discount	4438 Austin Bluffs Parkway
	CO Lumber Specialties	10% discount	3636 Stone Avenue
	GENERAL AIR	10% discount	3031 N Nevada Ave.
	ACE Hardware Uintah Gardens	10% discount	1830 W Uintah Street

Map of stores that provide PPM member discounts

Map of helpful local resources curated by our makers

At home LightBurn subscriptions can be purchased at a discounted rate for being a PPM member.

The discount code is saved as a Pinned Message in our 'laser-cutter' channel in Slack.

Red Tags

Use a Red Tag, which can be found in the red tag area, to designate broken equipment.

Scrap and Trash

Trash day is MONDAY

Recycling day is MONDAY (96 gallon tote)

Single Stream Recycling provided by Waste Connections. Paper, cardboard, cans, glass, and one time use plastics.

Empty recycling and trash into our dumpster at the back (south side) of the building.

Always leave the space better than you found it.

Member Showcase

• 

  Laser cut
  wooden clock
  (by Trevor Banks)

For even more member projects, visit our #showcase channel on Slack, or follow our social media links.

See Also

Links to other PPM Wiki pages (internal links):

Curated Links

Links to other sites (external links):

Other Fun Stuff

Take High-Quality Product Photos

Composing Product Photos for Your Etsy Business

Applying to gettyimages

---

Search the PPM Wiki — include Content pages as well as Multimedia.

Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.