Difference between revisions of "3D Printing"

From Pikes Peak Makerspace Wiki
Jump to navigation Jump to search
Line 29: Line 29:
 
{| class="wikitable sortable mw-collapsible"
 
{| class="wikitable sortable mw-collapsible"
 
|+
 
|+
 +
3D Printing Equipment
 
! Picture
 
! Picture
 
!'''Item'''
 
!'''Item'''
Line 36: Line 37:
 
!'''Estimated Value'''
 
!'''Estimated Value'''
 
!'''Manual'''
 
!'''Manual'''
−
!'''Serial'''
 
−
'''Number'''
 
 
!'''Owner'''
 
!'''Owner'''
 
!'''Status'''
 
!'''Status'''
Line 47: Line 46:
 
|'''Prusa Mk2s'''
 
|'''Prusa Mk2s'''
 
'''(Medussa)'''
 
'''(Medussa)'''
−
|Prusa Research
+
|[https://www.prusa3d.com/ PRUSA RESEARCH]
 
|N/A
 
|N/A
 
|$1,000
 
|$1,000
 
|Included
 
|Included
−
|N/A
 
 
|PPM
 
|PPM
 
|Down
 
|Down
Line 59: Line 57:
 
|'''Prusa Mk2s'''
 
|'''Prusa Mk2s'''
 
'''MMU2'''
 
'''MMU2'''
−
|Prusa Research
+
|[https://www.prusa3d.com/ PRUSA RESEARCH]
 
|
 
|
 
|
 
|
 
|Included
 
|Included
−
|N/A
 
 
|PPM
 
|PPM
 
|Down
 
|Down
Line 71: Line 68:
 
|
 
|
 
|'''Prusa MK2S (Haywire)'''
 
|'''Prusa MK2S (Haywire)'''
−
|Prusa Research
+
|[https://www.prusa3d.com/ PRUSA RESEARCH]
 
|Prusa MK2S
 
|Prusa MK2S
 
|$350
 
|$350
 
|Included
 
|Included
−
|N/A
 
 
|PPM
 
|PPM
 
|Down
 
|Down
Line 83: Line 79:
 
|'''Taz 5'''
 
|'''Taz 5'''
 
'''(MR. T)'''
 
'''(MR. T)'''
−
|Lulzbot
+
|[https://www.lulzbot.com/ LULZBOT]
 
|Taz 5
 
|Taz 5
 
|$1,200
 
|$1,200
 
|Included
 
|Included
−
|N/A
 
 
|PPM
 
|PPM
 
|Down
 
|Down
Line 95: Line 90:
 
|'''Taz 5'''
 
|'''Taz 5'''
 
'''(TIZZY)'''
 
'''(TIZZY)'''
−
|Lulzbot
+
|[https://www.lulzbot.com/ LULZBOT]
−
|Taz 5
+
|Taz 5,
 +
KITTAZ
 
|$1,200
 
|$1,200
 
|Included
 
|Included
−
|N/A
 
 
|PPM
 
|PPM
 
|Down
 
|Down
Line 106: Line 101:
 
|-
 
|-
 
|[[File:ANYCUBIC_3D_Printer.jpg|alt=ANYCUBIC 3D Printer|center|frameless|200x200px]]
 
|[[File:ANYCUBIC_3D_Printer.jpg|alt=ANYCUBIC 3D Printer|center|frameless|200x200px]]
−
|'''ANYCUBIC Photon'''
+
|'''ANYCUBIC PHOTON MONO 2K'''
 
'''resin printer'''
 
'''resin printer'''
−
|Anycubic
+
|[https://www.anycubic.com/ Anycubic]
 
|N/A
 
|N/A
 
|$200
 
|$200
−
|N/A
 
 
|N/A
 
|N/A
 
|PPM
 
|PPM
Line 119: Line 113:
 
|[[File:UV Curing Box.jpg|alt=UV Curing Box|200x200px|center|frameless]]
 
|[[File:UV Curing Box.jpg|alt=UV Curing Box|200x200px|center|frameless]]
 
|'''UV curing box'''
 
|'''UV curing box'''
−
|
+
|PPM
−
|
 
 
|
 
|
 
|
 
|
Line 135: Line 128:
 
|
 
|
 
|(none)
 
|(none)
−
|
 
 
| PPM
 
| PPM
 
|Up
 
|Up
Line 142: Line 134:
 
|[[File:Filament dryer box.jpg|alt=filament dryer box|200x200px|center|frameless]]
 
|[[File:Filament dryer box.jpg|alt=filament dryer box|200x200px|center|frameless]]
 
|'''filament dryer box'''
 
|'''filament dryer box'''
−
|N/A
+
|PPM
 
|N/A
 
|N/A
 
|
 
|
 
|
 
|
−
|N/A
 
 
|PPM
 
|PPM
 
|Up
 
|Up
Line 157: Line 148:
 
|
 
|
 
|none
 
|none
−
|60112
 
 
|PPM
 
|PPM
 
|?
 
|?
Line 166: Line 156:
 
|
 
|
 
|STAR TREK
 
|STAR TREK
−
|
 
 
|
 
|
 
|
 
|
Line 179: Line 168:
 
|?
 
|?
 
|
 
|
−
| 364381443
 
 
|PPM
 
|PPM
 
|Up
 
|Up
 
|
 
|
 
|-
 
|-
−
|'''Picture'''
+
|Picture
 
|'''Item'''
 
|'''Item'''
 
|'''Manufacturer'''
 
|'''Manufacturer'''
Line 191: Line 179:
 
|'''Estimated Value'''
 
|'''Estimated Value'''
 
|'''Manual'''
 
|'''Manual'''
−
|'''Serial'''
 
−
'''Number'''
 
 
|'''Owner'''
 
|'''Owner'''
 
|'''Status'''
 
|'''Status'''
−
'''Up/Down'''
+
Up/Down
 
|'''Problem'''
 
|'''Problem'''
 
'''Description'''
 
'''Description'''
Line 209: Line 195:
 
!'''Estimated Value'''
 
!'''Estimated Value'''
 
!'''Manual'''
 
!'''Manual'''
−
!'''Serial'''
 
−
'''Number'''
 
 
!'''Owner'''
 
!'''Owner'''
 
!'''Status'''
 
!'''Status'''
Line 222: Line 206:
 
|hp
 
|hp
 
|EliteBook 8570w
 
|EliteBook 8570w
−
|
 
 
|
 
|
 
|
 
|
Line 236: Line 219:
 
|'''Estimated Value'''
 
|'''Estimated Value'''
 
|'''Manual'''
 
|'''Manual'''
−
|'''Serial'''
 
−
'''Number'''
 
 
|'''Owner'''
 
|'''Owner'''
 
|'''Status'''
 
|'''Status'''
 
'''Up/Down'''
 
'''Up/Down'''
−
|
+
|'''Problem'''
 +
'''Description'''
 
|}
 
|}
 
{| class="wikitable sortable mw-collapsible"
 
{| class="wikitable sortable mw-collapsible"
 
|+
 
|+
 +
3D Printing - Not Working
 
!Picture
 
!Picture
 
!'''Item'''
 
!'''Item'''
Line 252: Line 235:
 
!'''Estimated Value'''
 
!'''Estimated Value'''
 
!'''Manual'''
 
!'''Manual'''
−
!'''Serial'''
 
−
'''Number'''
 
 
!'''Owner'''
 
!'''Owner'''
 
!'''Status'''
 
!'''Status'''
Line 262: Line 243:
 
|
 
|
 
|'''various Raspberry Pi boards'''
 
|'''various Raspberry Pi boards'''
−
|
 
 
|
 
|
 
|
 
|
Line 280: Line 260:
 
|$300
 
|$300
 
|N/A
 
|N/A
−
|M-DESIGN-3-G
 
 
|PPM
 
|PPM
 
|Working(?)
 
|Working(?)
Line 294: Line 273:
 
|$500
 
|$500
 
|N/A
 
|N/A
−
|M-DESIGN-5-G
 
 
|PPM
 
|PPM
 
|Working(?)
 
|Working(?)
Line 306: Line 284:
 
|N/A
 
|N/A
 
|$1,000
 
|$1,000
−
|N/A
 
 
|N/A
 
|N/A
 
|PPM
 
|PPM
Line 318: Line 295:
 
|$75
 
|$75
 
|N/A
 
|N/A
−
|21711
 
 
|PPM
 
|PPM
 
|Down
 
|Down
Line 329: Line 305:
 
|$2,500
 
|$2,500
 
|Included
 
|Included
−
|ChemicalBear
 
 
|PPM
 
|PPM
 
|Down
 
|Down
Line 340: Line 315:
 
|RapMan 3
 
|RapMan 3
 
|$100
 
|$100
−
|N/A
 
 
|N/A
 
|N/A
 
|PPM
 
|PPM
Line 353: Line 327:
 
|'''Estimated Value'''
 
|'''Estimated Value'''
 
|'''Manual'''
 
|'''Manual'''
−
|'''Serial'''
 
−
'''Number'''
 
 
|'''Owner'''
 
|'''Owner'''
 
|'''Status'''
 
|'''Status'''
Line 362: Line 334:
 
|}
 
|}
  
−
===[[Wish List]]===
+
===Hand Tools===
−
===[[Donations Received]]===
 
−
 
 
−
==Hand Tools==
 
 
Hand tools that belong in the 3D Printing Area should be marked with '''orange''' tape or paint.
 
Hand tools that belong in the 3D Printing Area should be marked with '''orange''' tape or paint.
  
 
Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.
 
Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.
  
 +
===[[Donations Received]]===
 +
===[[Wish List]]===
 
==Policies==
 
==Policies==
 
===Materials===
 
===Materials===
Line 394: Line 365:
 
[https://www.prusa3d.com/page/prusaslicer_424/ PrusaSlicer]
 
[https://www.prusa3d.com/page/prusaslicer_424/ PrusaSlicer]
  
−
[https://lychee.mango3d.io/ Lychee Slicer] (free version)
+
[https://lychee.mango3d.io/ Lychee Slicer] (free version) for ANYCUBIC resin printer
  
 
===Server sw===
 
===Server sw===

Revision as of 16:56, 2 December 2021

50x50px

The 3D Printing Area at Pikes Peak Makerspace consists mostly of Level 2 equipment.

Additional training is required to use our Level 2 equipment.

Safety First

Members must know the following information:

In case of emergency, call 911.
Our physical location is:
735 East Pikes Peak Avenue
Colorado Springs, CO 80903
use this when ordering pizza or an ambulance
  • Emergency sign

    IN CASE OF
    EMERGENCY
    sign

PPM Fire Escape Plan

Fire Escape Plan maps are posted throughout the Makerspace.
There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.
  • PPM Emergency Evacuation Plan 040721

    PPM Emergency
    Evacuation Plan.pdf

  • PPM Fire Prevention Plan 0407022

    PPM Fire
    Prevention Plan.pdf

  • PPM Fire Escape Plan

    PPM Fire Escape
    Plan

First Aid

There is a FIRST AID Supply Cabinet in our Kitchen Area.
FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.
  • FIRST AID Supply Cabinet

    FIRST AID
    Supply Cabinet

  • FIRST AID kit

    FIRST AID
    Kit

Eye Wash Stations

Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.
  • EMERGENCY EYE & FACE WASH STATION

    Emergency
    Eye & Face Wash
    Station

Personal Protective Equipment (PPE)

Wear protective equipment in all Wood and Metal Shop Areas.
Wear gloves when using Isopropyl Alcohol and other cleaners.
  • SAFETY GOGGLES

    Personal Protective Equipment (PPE)

Hazardous Chemicals

All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.
Review the Safety Data Sheet (SDS) information of unknown products before use.
SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.
Do not bring dangerous chemicals to the makerspace.
Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.
Please DO NOT paint indoors.
  • flammables cabinet

    Flammables Cabinet
    in the Vented Room



Impairment

The use of PPM equipment requires you to be alert, attentive, and focused.
Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.

3D Printing Classes and Training

Area Captain

Trevor Banks

Classes

Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup


Introduction to 3D Printing class info

Intro to SLA 3D Printing class info

For Help

Message in PPM Slack channel #3d-printing

Tips

Clear the resin trays carefully and completely to avoid cross-contamination.

Equipment Lists

3D Printing Equipment
Picture Item Manufacturer Model

Number

Estimated Value Manual Owner Status

Up/Down

Problem

Description

Prusa Mk2s

(Medussa)

PRUSA RESEARCH N/A $1,000 Included PPM Down
Prusa Mk2s

MMU2

PRUSA RESEARCH Included PPM Down MMU (Multi Material Unit) needs repair.

Under Warranty?

Prusa MK2S (Haywire) PRUSA RESEARCH Prusa MK2S $350 Included PPM Down Needs new bed and backup thermistors.
200x200px
 Taz 5

(MR. T)

LULZBOT Taz 5 $1,200 Included PPM Down
150x150px
 Taz 5

(TIZZY)

LULZBOT Taz 5,

KITTAZ

$1,200 Included PPM Down Board may need to be replaced. PEI sheet broken in half.

Needs new sheet.

ANYCUBIC 3D Printer
 ANYCUBIC PHOTON MONO 2K

resin printer

Anycubic N/A $200 N/A PPM Up
UV Curing Box
 UV curing box PPM PPM Up Description:

6x 6x10 inches

Dryer oven
 lab oven / dryer with timer Curtin Matheson (none) PPM Up Description: ~12x12x12 interior
filament dryer box
 filament dryer box PPM N/A PPM Up
Fume Extractor
 Fume Extractor PACE 8888-0825 none PPM ? needs filters, probably
3Doodler create
 3Doodler create STAR TREK PPM
INFRARED THERMOMETER
 INFRARED THERMOMETER CEN-TECH ? PPM Up
Picture Item Manufacturer Model

Number

Estimated Value Manual Owner Status

Up/Down

Problem

Description

3D Printing Computer
Picture Item Manufacturer Model

Number

Estimated Value Manual Owner Status

Up/Down

Problem

Description

computer

(laptop)

hp EliteBook 8570w PPM Up
Picture Item Manufacturer Model

Number

Estimated Value Manual Owner Status

Up/Down

Problem

Description

3D Printing - Not Working
Picture Item Manufacturer Model

Number

Estimated Value Manual Owner Status

Up/Down

Problem

Description

various Raspberry Pi boards PPM Working(?)

but not online

computer

(Resin machine)

Custom N/A $300 N/A PPM Working(?)

but not online

computer

(Slicing machine)

Custom N/A $500 N/A PPM Working(?)

but not online

3D Printer (high temp) Stratasys N/A $1,000 N/A PPM Down Under construction
200x200px
 Monoprice Mini 3D Printer Monoprice Mini E3D Edition $75 N/A PPM Down Not plugged in. Should work, needs to be tested.
Formlabs Form 2 resin printer
 Form 2 resin printer Form Form 2 $2,500 Included PPM Down Unable to get successful prints

May need new resin.

RapMan 3 3D Printer Unknown RapMan 3 $100 N/A PPM Down Needs board wired and powersupply hooked up.
Picture Item Manufacturer Model

Number

Estimated Value Manual Owner Status

Up/Down

Problem

Description

Hand Tools

Hand tools that belong in the 3D Printing Area should be marked with orange tape or paint.

Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Donations Received

Wish List

Policies

Materials

Donate for "3D Print Filament": bit.ly/ppmstuff

Filament Cost $0.029 per Gram

Or, leave donations in a black payment box, or use a QR code.

PPE

Donate for PPE

Or, leave donations in a black payment box, or use a QR code.

Scrap and Trash

Separate scrap PLA and PETG plastics from Trash, so the plastics can be recycled.

Software

Modeling sw

Fusion 360

Slicing sw

PrusaSlicer

Lychee Slicer (free version) for ANYCUBIC resin printer

Server sw

Repetier-Server

Showcase

Photo Gallery

(Displayed in random order.)

  • Taz 5 display
  • 3D printed camera slider
    3D printed camera slider
    (PETG)
  • camera slider closeup
  • 3D Printed Lion
    3D Printed Lion
    (PLA)
  • 3D printed Nikola Tesla
    Tesla bust
    8 inch tall (PLA)
  • Filament dryer box
    Filament dryer box
  • Toilet paper holder
    Toilet paper holder
  • exiii prosthetic/robotic hand
    3D Printed open-source
    prosthetic/robotic hand

PPM YouTube Channel

"featured" videos, (the YouTube "HOME" tab)

"Things we've built", Created playlists, including 3D-printed robotic hand (2015)

Other Fun Stuff

"Wear you some gloves.", https://shop.crafnation.com/product/wearyousomegloves

Make QR Codes

Lithophane Links

Retrieved from "https://wiki.pikespeakmakerspace.org/index.php?title=3D_Printing&oldid=1223"