Vinyl Cutting

The Vinyl Cutting Area at Pikes Peak Makerspace (PPM) consists mostly of Level 2 equipment.
Additional training is required to use our Level 2 equipment.

Vinyl Cutting Area
(20 November 2021)

Safety First

Members must know the following information:

In case of emergency, call 911.

Our physical location is:

735 East Pikes Peak Avenue

Colorado Springs, CO 80903

use this when ordering pizza or an ambulance

IN CASE OF
EMERGENCY
sign

PPM Fire Escape Plan

Fire Escape Plan maps are posted throughout the Makerspace.

There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.

PPM Emergency
Evacuation Plan.pdf
PPM Fire
Prevention Plan.pdf
PPM Fire Escape
Plan

First Aid

There is a FIRST AID Supply Cabinet in our Kitchen Area.

FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.

FIRST AID
Supply Cabinet
FIRST AID
Kit

Eye Wash Stations

Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.

Emergency
Eye & Face Wash
Station

Personal Protective Equipment (PPE)

Wear protective equipment in all Wood and Metal Shop Areas.

Wear gloves when using Isopropyl Alcohol and other cleaners.

Personal Protective Equipment (PPE)

Hazardous Chemicals

All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.

Review the Safety Data Sheet (SDS) information of unknown products before use.

SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.

Do not bring dangerous chemicals to the makerspace.

Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.

Please DO NOT paint indoors.

Flammables Cabinet

Classes and Training

New Member Orientation

Area Captain -- Volunteers needed

To help out with the Vinyl Cutter, post your ideas and comments on Slack.

View all PPM Area Captains

Classes

Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup

Training

- Pick the small Application Launcher button from CorelDRAW, and then "Send Cut Lines to CM3".

- If you receive a no Media Error, and your job pauses, try pressing ENTER to override the sensor and continue your cutting.

- Some vinyl materials contain PVC. Do not use these on either of our laser engravers.

(e.g. Oracal ORAMASK 813 Stencil Film and Con-Tact brand paper)

Vinyl Cutter
Overview and Instructions.pdf

Tips

To turn on the lights on the vinyl cutter cart, use the remote and point at the receiver near the power strip.

For Additional Help

Use the PPM Slack channel #vinyl-cutter

Equipment Lists

24" Graphtec cutter

Picture	Item	Manufacturer	Model Number	Estimated Value	Manual	Owner	Status
	24" Cutting Plotter	Graphtec	CE5000‑60	$500	yes	PPM (donated by PARADIGM SYSTEMS)	working
	Vinyl cutter cart lighting remote				no	PPM	working
Picture	Item	Manufacturer	Model Number	Estimated Value	Manual	Owner	Status

Vinyl Cutting Computer

Picture	Item	Manufacturer	Model Number	Estimated Value	Software	Owner	Status
	PC	HP	h8-1117c	$250	Windows 10 Pro, CorelDRAW X6, Cutting Master 3, Graphtec Pro Studio	PPM	working
	monitor	Dell	V226HQL	$100		PPM	working
	wired mouse and keyboard	Amazon, Dell		~ $5 - $10 each		PPM	working
Picture	Item	Manufacturer	Model Number	Estimated Value	Software	Owner	Status

The vinyl cutting PC is not a design workstation. Please limit the use of the station to printing/cutting only.

34" VEVOR cutter

Picture	Item	Manufacturer	Model Number	Estimated Value	Manual	Owner	Status	Problem Description
	34" vinyl cutter	VEVOR	KI-870	?		Theo	?	In storage
Picture	Item	Manufacturer	Model Number	Estimated Value	Manual	Owner	Status	Problem Description

Hand Tools

Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Donations Received

Wish List

Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make.

Benefits and Policies

PPM members enjoy discounts at the following local merchants:

(walk in, show proof of membership)


Company	Website	Benefit	Directions to
	Woodcraft of Colorado Springs	10% discount	4438 Austin Bluffs Parkway
	CO Lumber Specialties	10% discount	3636 Stone Avenue
	GENERAL AIR	10% discount	3031 N Nevada Ave.
	ACE Hardware Uintah Gardens	10% discount	1830 W Uintah Street