Vinyl Cutting

From Pikes Peak Makerspace Wiki
Revision as of 20:39, 18 November 2021 by Warren (talk | contribs)
Jump to navigation Jump to search

The Vinyl Cutting Area consists mostly of Level 2 equipment.

Additional training is required to use our Level 2 equipment.

Safety First

Covid-19 notice

Emergency Contact:

Drew Johnson, Executive Director

Personal Protective Equipment (PPE):

Wear gloves when using Isopropyl Alcohol and other cleaners.

Classes/Training

For Help:

Message in PPM Slack channel #vinyl-cutter

Equipment List

Item Owner Manufacturer Model

Number

Estimated Value Manual Serial

Number

Status Problem

Description

Cutting Plotter PPM Graphtec CE5000-60 $500 yes A60810979 working
PC PPM HP h8-1117c $250 no working
Monitor PPM Acer V226HQL $100 no working

Hand Tools

Hand tools that belong in the 3D Printing Area should be marked with orange tape or paint.

Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Policies

Materials:

PPE:

Scrap/Trash:

Software

Wish List

TODO: Donations Received

Donations Received

Showcase

Photo Gallery:

YouTube:

"Things we've built", Created playlists (2015)

Other Fun Stuff