Vinyl Cutting

From Pikes Peak Makerspace Wiki
Revision as of 20:02, 29 November 2021 by Warren (talk | contribs)
Jump to navigation Jump to search
Vinyl Cutter Area
Vinyl Cutting Area

File:Training Level 2 icon.pdfThe Vinyl Cutting Area at Pikes Peak Makerspace consists mostly of Level 2 equipment.

Additional training is required to use our Level 2 equipment.

Safety First

Covid-19 notice

In case of emergency, call 911

Our location is 735 East Pikes Peak Avenue, Colorado Springs, CO 80903

Personal Protective Equipment (PPE)

Classes and Training

Area Captain

(Open)

Classes

Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup

For Help

Message in PPM Slack channel #vinyl-cutter

Tips

Pick the small Application launcher button from CorelDRAW, and then "Send Cut Lines to CM3".

If you receive a no Media Error, and your job pauses, try pressing ENTER to override the sensor and continue your cutting.

To turn on the lights on the vinyl cutter cart, use the remote and point at the receiver near the power strip.

Equipment Lists

24" Graphtec cutter
Picture Item Manufacturer Model

Number

Estimated Value Manual Serial

Number

Owner Status Problem

Description

vinyl cutter 24" Cutting Plotter

File:Training Level 2 icon.pdf

Graphtec CE5000-60 $500 yes A60810979 PPM

(donated by PARADIGM SYSTEMS)

working
Vinyl cutter cart lighting remote
Vinyl cutter cart lighting remote no PPM working
??
Picture Item Manufacturer Model

Number

Estimated Value Manual Serial

Number

Owner Status Problem

Description

34" VEVOR cutter
Picture Item Manufacturer Model

Number

Estimated Value Manual Serial

Number

Owner Status Problem

Description

34"

vinyl cutter

VEVOR KI-870 PPM ?? In storage
Picture Item Manufacturer Model

Number

Estimated Value Manual Serial

Number

Owner Status Problem

Description

Computers
Picture Item Manufacturer Model

Number

Estimated Value Manual Serial

Number

Owner Status Problem

Description

PC HP h8-1117c $250 no PPM working
monitor Dell V226HQL $100 no PPM working
wired mouse

and keyboard

Amazon

(both)

amazon basics

(both)

$10 each no PPM working
Picture Item Manufacturer Model

Number

Estimated Value Manual Serial

Number

Owner Status Problem

Description

The vinyl cutting PC is not a design workstation. Please limit the use of the station to printing/cutting only.

Wish List

Donations Received

Hand Tools

Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Policies

Reservations

No reservation system at this time. First come, first served. (It's usually available.)

Materials

Cost

Vinyl $0.25/foot

R Tape $0.25/foot

TOTAL $0.50/foot

Donate for "Vinyl Stickers and R Tape" via PayPal: bit.ly/ppmstuff

Or, leave donations in a black payment box, or use a QR code.

Help Us Keep Stocked Up!

PPE

Scrap and Trash

Software

CorelDRAW X6 (64-Bit)

Cutting Master 3

Showcase

Photo Gallery

(in no particular order)

Other Fun Stuff

PPM YouTube Channel

"featured" videos, (the YouTube "HOME" tab)

"Things we've built", Created playlists, including 3D-printed robotic hand (2015)