CNC
The CNC Area at Pikes Peak Makerspace consists mostly of Level 2 equipment.
Additional training is required to use our Level 2 equipment.
CNC Area hand tools should be marked with blue tape or paint.
Safety First
Members must know the following information:
- In case of emergency, call 911.
- Our physical location is:
- 735 East Pikes Peak Avenue
- Colorado Springs, CO 80903
- use this when ordering pizza or an ambulance
IN CASE OF
EMERGENCY
sign
PPM Fire Escape Plan
- Fire Escape Plan maps are posted throughout the Makerspace.
- There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.
PPM Emergency
Evacuation Plan.pdf
PPM Fire
Prevention Plan.pdf
PPM Fire Escape
Plan
First Aid
- There is a FIRST AID Supply Cabinet in our Kitchen Area.
- FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.
FIRST AID
Supply Cabinet
FIRST AID
Kit
Eye Wash Stations
- Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.
Emergency
Eye & Face Wash
Station
Personal Protective Equipment (PPE)
- Wear protective equipment in all Wood and Metal Shop Areas.
- Wear gloves when using Isopropyl Alcohol and other cleaners.
Personal Protective Equipment (PPE)
Hazardous Chemicals
- All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.
- Review the Safety Data Sheet (SDS) information of unknown products before use.
- SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.
- Do not bring dangerous chemicals to the makerspace.
- Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.
- Please DO NOT paint indoors.
Flammables Cabinet
Classes and Training
Area Captain
- Trevor Banks
Classes
- Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup
For Help
- Message in PPM Slack channel #cnc-machine
Tips
Equipment List
| Picture | Item | Manufacturer | Model
Number |
Estimated Value | Manual | Owner | Status | Problem
Description |
|---|---|---|---|---|---|---|---|---|
| CNC router parts
pro |
Avid cnc | $7,000 | no | PPM | working | |||
| shopmaster eldorado bridge mill | shopmaster | $5,000 | yes | PPM | working | |||
| handibot | shop bot | $2,000 | ? | John Norton | working | |||
| handibot | shop bot | ? | ? | PPM (donation) | ? | |||
| Roland cnc | roland | MODELA | ? | PPM | ? | |||
| CNC shark | Nextwave Automation | $3,500 | Drew | working | ||||
| Picture | Item | Manufacturer | Model
Number |
Estimated Value | Manual | Owner | Status | Problem
Description |
Hand Tools
- Hand tools that belong in the CNC Area should be marked with blue tape or paint.
- Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.
Donations Received
Wish List
Policies
PPE
Materials
- Donate for "General Supplies" via PayPal: bit.ly/ppmstuff
- Or, leave donations in a black payment box, or use a QR code.
- Help Us Keep Stocked Up!
Scrap and Trash
Software
- ===Fusion 360===
Showcase
Photo Gallery
PPM logo large
Other Fun Stuff
PPM YouTube Channel
- "featured" videos, (the YouTube "HOME" tab)
- "Things we've built", Created playlists, including 3D-printed robotic hand (2015)