3D Scanning

From Pikes Peak Makerspace Wiki
Revision as of 21:09, 29 May 2023 by Warren (talk | contribs)
Jump to navigation Jump to search

Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative process by providing shared space, shared tools, software, materials and a knowledge base to turn their ideas into reality.

 3D Scanning Area  hand tools should be marked with orange tape or paint.

Safety First

Members must know the following information:

In case of emergency, call 911

Our physical location is:
735 East Pikes Peak Avenue
Colorado Springs, CO 80903
use this when ordering pizza or an ambulance

PPM Fire Escape Plan

Fire Escape Plan maps are posted throughout the Makerspace.
There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.

First Aid

There is a FIRST AID Supply Cabinet in our Kitchen Area.
FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.

Eye Wash Stations

Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.

Personal Protective Equipment (PPE)

Wear protective equipment in all Wood and Metal Shop Areas.
Wear gloves when using Isopropyl Alcohol and other cleaners.

Hazardous Chemicals

All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.
Review the Safety Data Sheet (SDS) information of unknown products before use.
SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.
Do not bring dangerous chemicals to the makerspace.
Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.
Please DO NOT paint indoors.

Classes and Training

New Member Orientation

Area Captain -- Trevor Banks

Additional 3D Scanning Captains wanted
To help out in the  3D Scanning Area  contact the Area Captain on Slack.


Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup


Links to other sites (external links):

How to Use 3D Scanning and 3D Printing for Reverse Engineering

For Additional Help

Use the PPM Slack channel #3d-printing
List of all PPM Slack channels
Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the community.

Equipment Lists

Item Manufacturer Model
iPad 4th Generation (2012)

(60GB) and charger

Apple MD527LL/A
Structure Sensor

and charger

Occipital ST01
Structure Sensor

bracket (Ice Blue)

Occipital SA03
3D scanner XBOX

Hand Tools

Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Donations Received

Wish List

Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make.


Links to other PPM Wiki pages (internal links):

Fusion 360

See Also

Links to other PPM Wiki pages (internal links):

3D Printing

Curated Links

Links to other sites (external links):

3D scan with a phone

Other Fun Stuff

Links to other sites (external links):

Multiple Raspberry PI 3D Scanner

PPM Tool Color Map — Interactive
Search our Wiki (If your answer is not here on the Wiki, please let us know!)