Laser Cutting Material Table
Jump to navigation
Jump to search
Table is for 30 Watt Laser
SUBSTRATE | 250 DPI RASTER ENGRAVING SPEED/POWER |
400 DPI RASTER ENGRAVING SPEED/POWER |
500 DPI RASTER ENGRAVING SPEED/POWER |
VECTOR CUTTING SPEED/POWER/FREQUENCY |
---|---|---|---|---|
Wood Cherry - Alder - Walnut | 40/100 | 50/100 | 60/100 | ⅛ (3 mm) – 70/70/500 |
¼ (6.4 mm) – 15/100/500 | ||||
(multiple passes may allow cutting of thicker materials) | ||||
Acrylic | 100/100 | 100/80 | 100/60 | ⅛ (3 mm) – 15/100/5000 |
¼ (6.4 mm) – 5/100/5000 | ||||
(multiple passes may allow cutting of thicker materials) | ||||
Anodized Aluminum | 100/80 | 100/70 | 100/60 | N/A |
Brass-Painted | 100/80 | 100/70 | 100/60 | N/A |
Marbleized Painted Brass | 100/90 | 100/80 | 100/70 | N/A |
Coran Or Avonite | 10/100 | 15/100 | 20/100 | ⅛” (3 mm) – 30/100/5000 |
Delrin Seals | 100/100 | 100/80 | 100/70 | 50/50/5000 |
Glass | 15/100 | 20/100 | 25/100 | N/A |
Laserable Plastic | 100/80 | 100/70 | 100/60 | 50/30/5000 |
Leather | 100/65 | 100/55 | 100/45 | ⅛” (3 mm) – 50/50/500 |
Marble | 8/100 | 10/100 | 15/100 | N/A |
Matt board | 100/85 | 100/75 | 100/65 | 30/80/500 |
Melamine | 40/100 | 50/100 | 60/100 | N/A |
Stainless Stell with Cerdec Coating | 8/100 | 10/100 | 15/100 | N/A |
Rubber & Rubber Stamps | 5/100 | 10/100 | 20/100 | 12/100/100 |