3D Printing — Resin (SLA)
The 3D Printing Area at Pikes Peak Makerspace (PPM) consists mostly of Level 2 equipment.
Additional training is required to use our Level 2 equipment.
3D Printing Area hand tools should be marked with orange tape or paint.
Safety First
Members must know the following information:
- In case of emergency, call 911.
- Our physical location is:
- 735 East Pikes Peak Avenue
- Colorado Springs, CO 80903
-
IN CASE OF
EMERGENCY
sign
PPM Fire Escape Plan
- Fire Escape Plan maps are posted throughout the Makerspace.
- There are 7 fire extinguishers on the fire escape plan map.
- Review the PPM Fire Escape Plan for locations.
-
PPM Emergency
Evacuation Plan.pdf -
PPM Fire
Prevention Plan.pdf -
PPM Fire Escape
Plan
First Aid
- There is a FIRST AID Supply Cabinet in our Kitchen Area.
- FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.
-
FIRST AID
Supply Cabinet -
FIRST AID
Kit
Eye Wash Stations
- Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.
-
Emergency
Eye & Face Wash
Station
Personal Protective Equipment (PPE)
- Wear protective equipment in all Wood and Metal Shop Areas.
- Wear gloves when using Isopropyl Alcohol and other cleaners.
- Gloves should not be worn when using powered equipment (saws, jointers, drills, or other equipment). Leather gloves can be worn for handling materials, but not when operating machinery.
-
Personal Protective Equipment (PPE)
Hazardous Chemicals
- All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.
- Review the Safety Data Sheet (SDS) information of unknown products before use.
- SDS information is available via this spreadsheet.
- Do not bring dangerous chemicals to the makerspace.
- Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.
- Please DO NOT paint indoors.
-
Flammables Cabinet
in the Vented Room
Other Hazards
- Avoid placing uncovered (extension) cords, hoses, cables, or wires across the floors of our shops.
Impairment
- The use of PPM equipment requires you to be alert, attentive, and focused.
- Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.
Classes and Training
New Member Orientation
Area Captain -- Chris MacNicol
- To help out in the 3D Printing Area contact the Area Captain on Slack.
Classes
- Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup
Training
- Intro to SLA 3D Printing -- class info
- Be sure to log your SLA printing job using the Printer Usage Form.
- Clear the resin trays of the SLA printers carefully and completely to avoid cross-contamination.
For Additional Help
- Use the PPM Slack channel #3d-printing
- List of all PPM Slack channels
- Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the community.
Equipment Lists
3D Printing Equipment
| Picture | Item | Manufacturer | Model Number |
Print Volume |
Upgrades |
| Resin Printer |
Anycubic | PHOTON MONO 2K | 163 x 102 x 180 mm tall | magnetic bed | |
Number |
Volume |
3D Printing Equipment -- Other
| Picture | Item | Manufacturer |
 |
UV curing box
(6x6x10 inches) |
PPM |
 |
Fume Extractor | PACE
8888-0825 |
-
IMPULSE SEALER
label
3D Printing -- Computers
| Picture | Item | Manufacturer/
Model |
CPU | Memory | Storage | System Software |
Application Software |
| computer
(Resin machine), "M-DESIGN-5-G" |
Windows 10 | PrusaSlicer | |||||
Model |
Software |
Software |
Hand Tools
-
INFRARED THERMOMETER
- 3D Printing Area hand tools should be marked with orange tape or paint.
- Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.
Donations Received
Wish List
- Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make.
Benefits and Policies
- PPM members enjoy discounts at the following local merchants:
- (bring proof of PPM membership)
| Website | Benefit | Address |
|---|---|---|
| Woodcraft of Colorado Springs | 10% discount | 4438 Austin Bluffs Parkway |
| CO Lumber Specialties | 10% discount | 3636 Stone Avenue |
| GENERAL AIR | 10% discount | 3031 N Nevada Ave. |
| ACE Hardware Uintah Gardens | 10% discount | 1830 W Uintah Street |
Equipment Reservations
PPE
- Donate for PPE
- Or, leave donations in a black payment box, or use a QR code.
Materials
Red Tags
Scrap and Trash
- Trash day is TUESDAY (Extra pickups can be called from Waste Connections for around $75)
- Recycling day is MONDAY (96 gallon tote should be placed out back by the dumpster)
- Single Stream Recycling provided by Waste Connections. Paper, cardboard, cans, glass, and one time use plastics.
- Empty interior trash cans into our dumpster at the back (south side) of the building.
- Always leave the space better than you found it.
Software
Modeling sw
Slicing sw
- Lychee Slicer (free version) for ANYCUBIC resin printer.
Member Showcase
See Also
Links to other PPM Wiki pages (internal links):
Curated Links
Links to other sites (external links):
Other Fun Stuff
Links to other sites (external links):
Search the PPM Wiki — include Content pages as well as Multimedia.
Contact Us if you cannot find your answer here on our Wiki or if you notice any outdated information.