Large Format Printing
Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative process by providing shared space, shared tools, materials and a knowledge base to turn their ideas into reality.
The Large Format Printing Area at Pikes Peak Makerspace (PPM) consists mostly of Level 2 equipment.
Additional training is required to use our Level 2 equipment.
Safety First
Members must know the following information:
- In case of emergency, call 911.
- Our physical location is:
- 735 East Pikes Peak Avenue
- Colorado Springs, CO 80903
- use this when ordering pizza or an ambulance
PPM Fire Escape Plan
- Fire Escape Plan maps are posted throughout the Makerspace.
- There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.
First Aid
- There is a FIRST AID Supply Cabinet in our Kitchen Area.
- FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.
Eye Wash Stations
- Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.
Personal Protective Equipment (PPE)
- Wear protective equipment in all Wood and Metal Shop Areas.
- Wear gloves when using Isopropyl Alcohol and other cleaners.
Hazardous Chemicals
- All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.
- Review the Safety Data Sheet (SDS) information of unknown products before use.
- SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.
- Do not bring dangerous chemicals to the makerspace.
- Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.
- Please DO NOT paint indoors.
Impairment
- The use of PPM equipment requires you to be alert, attentive, and focused.
- Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.
Classes and Training
New Member Orientation
Area Captain -- Volunteers needed
- To help out with the Large Format Printer, post your ideas/comments on Slack.
Classes
- Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup
Training
- After loading a new roll of material, be sure the roll spins freely. (Be sure it doesn't rub against the printer.)
- Use the small power button on the front, lower left of the printer for an "Emergency Stop", if necessary.
- Otherwise, to clear the printer, cycle the power using the power switch in the back, next to the power cord.
- Plain paper is recyclable. (Photo paper and canvas are not.)
- Be sure to log your printing job using the new Printer Usage Form.
The following pages contain historical information. The pages are provided for reference only.
Captured transcript of Large Format Printer Refresher video (by former PPM member Logan Henning):
Tips
- - The media profile for "Canvas" does not allow cutting at the end of the job (or even manually), just use the scissors instead.
- - If printer reports "Print Head Path Error 2", check the (Illustrator) file to see if it has elements that need to be trimmed to fit within the artboard.
For Additional Help
- Use the #printer-suite or #computing channels in Slack!
Equipment Lists
Large Format Printer
Picture | Item | Manufacturer | Model Number |
Estimated Value |
Owner |
---|---|---|---|---|---|
Large Format
4-Color Inkjet Printer |
hp
with (416 MB memory upgrade) |
? |
PPM | ||
2" spindle hub
(3D-printed) |
Trevor Banks | designed by
Trevor Banks (04/12/22) |
priceless | PPM | |
3" to 2" spindle hub adapter
(3D-printed) |
Trevor Banks | designed by
Trevor Banks (04/16/22) |
priceless | PPM | |
Number |
Value |
Hand Tools
- Use scissors to cut canvas, (the media profile "Canvas" does not allow cutting.)
- Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.
Donations Received
Wish List
Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make.
Benefits and Policies
- PPM members enjoy discounts at the following local merchants:
- (bring proof of membership)
Company | Website | Benefit | Directions to |
Woodcraft of Colorado Springs | 10% discount | 4438 Austin Bluffs Parkway | |
CO Lumber Specialties | 10% discount | 3636 Stone Avenue | |
GENERAL AIR | 10% discount | 3031 N Nevada Ave. | |
ACE Hardware Uintah Gardens | 10% discount | 1830 W Uintah Street | |
- Map of stores that provide PPM member discounts
- Map of helpful local resources curated by our makers
- At home LightBurn subscriptions can be purchased at a discounted rate for being a PPM member.
- The discount code is saved as a Pinned Message in our 'laser-cutter' channel in Slack.
Equipment Reservations
Materials
- Donate for Printing Materials: https://printing.cheddarup.com Use checkout for all payment methods.
- If paying by cash, leave donations in a black payment box after login in Cheddar Up.
- 14", 24", and 30" (Fredrix brand) stretcher boards, stretcher tool and stapler for mounting canvas prints, cost TBD.
Large Format Printing Supplies
Item | Weight | Size | Core Size
2 or 3 in |
Quantity | Recommendation | Date |
---|---|---|---|---|---|---|
HP Everyday
Instant-Dry Gloss Photo Paper |
42" | 2 in | 5/12/22 | |||
HP Everyday Blockout
Display Film |
36inx100ft | 2 in | (1 unopened) |
4/16/22 | ||
Presentation Grade
Matte Paper |
36" | |||||
Bright White
Bond Paper |
20lb | 30" | ||||
Premium
Matte Paper |
47lb | 24" | ||||
Bright White
Bond Paper |
20lb | 33" | ||||
Bright White
Bond Paper |
20lb | 23.5" | ||||
Heavy Weight
Coated Paper |
36" | |||||
Bright White
Bond Paper |
20lb | 24" | ||||
Translucent
Bond Paper |
15lb | 24" | ||||
Off White
Bond Paper |
24" | |||||
Bright White
Bond Paper |
20lb | 36" | ||||
Bright White
Bond Paper |
20lb | 11" | Sell | |||
Bright White
Bond Paper |
20lb | 11.5" | Sell | |||
Translucent
Bond Paper |
15lb | 36" | Sell | |||
Translucent
Bond Paper |
15lb | 48" | Sell -- too wide | |||
Red Tags
Scrap and Trash
- Trash day is MONDAY
- Recycling day is MONDAY (96 gallon tote)
- Single Stream Recycling provided by Waste Connections. Paper, cardboard, cans, glass, and one time use plastics.
- Empty recycling and trash into our dumpster at the back (south side) of the building.
- Always leave the space better than you found it.
Software
Design Software
Printing Software
- Adobe Acrobat
- Preview -- Print directly from Macintosh applications, including Preview
Member Showcase
- For even more member projects, visit our #showcase channel on Slack, or follow our social media links.
See Also
Links to other PPM Wiki pages (internal links):
Curated Links
Links to other sites (external links):
Other Fun Stuff
Links to other sites (external links):
- Consider Hofstadter's law
Search the PPM Wiki — include Content pages as well as Multimedia.
Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.