Laser Cutting Material Table
For 30 Watt Laser:
| Raster Engraving | Vector Cutting | |||
| Substrate | 250 DPI Speed / Power |
400 DPI Speed / Power |
500 DPI Speed / Power |
Speed / Power / Frequency |
| Wood Cherry - Alder - Walnut | 40 / 100 | 50 / 100 | 60 / 100 | ⅛ (3 mm) – 70 / 70 / 500 |
| ¼ (6.4 mm) – 15 / 100 / 500 | ||||
| (multiple passes may allow cutting of thicker materials) | ||||
| Acrylic | 100 / 100 | 100 / 80 | 100 / 60 | ⅛ (3 mm) – 15 / 100 / 5000 |
| ¼ (6.4 mm) – 5 / 100 / 5000 | ||||
| (multiple passes may allow cutting of thicker materials) | ||||
| Coran or Avonite ⅛” (3 mm) | 10 / 100 | 15 / 100 | 20 / 100 | 30 / 100 / 5000 |
| Delrin Seals | 100 / 100 | 100 / 80 | 100 / 70 | 50 / 50 / 5000 |
| Laserable Plastic | 100 / 80 | 100 / 70 | 100 / 60 | 50 / 30 / 5000 |
| Leather ⅛” (3 mm) | 100 / 65 | 100 / 55 | 100 / 45 | 50 / 50 / 500 |
| Matboard | 100 / 85 | 100 / 75 | 100 / 65 | 30 / 80 / 500 |
| Rubber and Rubber Stamps |
5 / 100 | 10 / 100 | 20 / 100 | 12 / 100 / 100 |
| Anodized Aluminum | 100 / 80 | 100 / 70 | 100 / 60 | |
| Brass-Painted | 100 / 80 | 100 / 70 | 100 / 60 | |
| Marbleized Painted Brass | 100 / 90 | 100 / 80 | 100 / 70 | |
| Glass | 15 / 100 | 20 / 100 | 25 / 100 | |
| Marble | 8 / 100 | 10 / 100 | 15 / 100 | |
| Melamine | 40 / 100 | 50 / 100 | 60 / 100 | |
| Stainless Steel with Cerdec Coating |
8 / 100 | 10 / 100 | 15 / 100 | |
Additional Help
Links to related PPM Wiki pages:
Search the PPM Wiki — include Content pages as well as Multimedia.
Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.