Laser Cutting Material Table

For 30 Watt Laser:

SUBSTRATE	250 DPI RASTER ENGRAVING SPEED/POWER	400 DPI RASTER ENGRAVING SPEED/POWER	500 DPI RASTER ENGRAVING SPEED/POWER	VECTOR CUTTING SPEED/POWER/FREQUENCY
Wood Cherry - Alder - Walnut	40/100	50/100	60/100	⅛ (3 mm) – 70/70/500
				¼ (6.4 mm) – 15/100/500
				(multiple passes may allow cutting of thicker materials)
Acrylic	100/100	100/80	100/60	⅛ (3 mm) – 15/100/5000
				¼ (6.4 mm) – 5/100/5000
				(multiple passes may allow cutting of thicker materials)
Anodized Aluminum	100/80	100/70	100/60	N/A
Brass-Painted	100/80	100/70	100/60	N/A
Marbleized Painted Brass	100/90	100/80	100/70	N/A
Coran Or Avonite	10/100	15/100	20/100	⅛” (3 mm) – 30/100/5000
Delrin Seals	100/100	100/80	100/70	50/50/5000
Glass	15/100	20/100	25/100	N/A
Laserable Plastic	100/80	100/70	100/60	50/30/5000
Leather	100/65	100/55	100/45	⅛” (3 mm) – 50/50/500
Marble	8/100	10/100	15/100	N/A
Matt board	100/85	100/75	100/65	30/80/500
Melamine	40/100	50/100	60/100	N/A
Stainless Stell with Cerdec Coating	8/100	10/100	15/100	N/A
Rubber & Rubber Stamps	5/100	10/100	20/100	12/100/100

For Additional Help

Search the PPM Wiki — include Content pages as well as Multimedia.

Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.

Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative processes by providing shared space, shared tools, materials, software, and a knowledge base to turn their ideas into reality.

---