Electronics
Pikes Peak Makerspace (PPM) provides a work area with electronic equipment and electronic components for all makers, from the very beginner to the expert.
Electronics Area hand tools should be marked with purple tape or paint.
Safety First
Members must know the following information:
- In case of emergency, call 911.
- Our physical location is:
- 735 East Pikes Peak Avenue
- Colorado Springs, CO 80903
- use this when ordering pizza or an ambulance
PPM Fire Escape Plan
- Fire Escape Plan maps are posted throughout the Makerspace.
- There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.
First Aid
- There is a FIRST AID Supply Cabinet in our Kitchen Area.
- FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.
Eye Wash Stations
- Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.
Personal Protective Equipment (PPE)
- Wear protective equipment in all Wood and Metal Shop Areas.
- Wear gloves when using Isopropyl Alcohol and other cleaners.
Hazardous Chemicals
- All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.
- Review the Safety Data Sheet (SDS) information of unknown products before use.
- SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.
- Do not bring dangerous chemicals to the makerspace.
- Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.
- Please DO NOT paint indoors.
Impairment
- The use of PPM equipment requires you to be alert, attentive, and focused.
- Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.
Classes and Training
New Member Orientation
Area Contact — Steve Leininger
To help out in the Electronics Area message the Area Contact on Slack.
Classes
PPM announces its Upcoming events, including classes, on Meetup
Training
Links to external sites:
- Basic Electronics — on AUTODESK Instructables
- How To Use A Multimeter — IFIXIT Guide
- Adafruit Learning System — Guides published within the last 90 days
- Adafruit Guide To Excellent Soldering (pdf)
Tips
- Measure twice, solder once.
- Our electronics-related books — on LibraryThing.com
Equipment Lists
Electronics Equipment
Picture | Item | Manufacturer/ Model |
Reference Materials |
logic analyzer | saleae | Saleae Support | |
oscilloscope
(250MHz, 2 channel) |
hp
54510A |
Front Panel Reference
(pdf) | |
digital oscilloscope
(100MHz) |
PHILIPS
PM 3070 |
||
DC POWER SUPPLY
60v 1.5a 90w 1Ch |
Protek
3006B |
||
AUTOMATIC VOLTAGE REGULATOR | SIMRAN
AR-350 |
||
MULTIMETER | hp
3478A |
||
PULSE/FUNCTION GENERATOR
50 MHz |
hp
8116A |
Manual | |
VACUUM TUBE
VOLTMETER (condition unknown) |
hp
400D |
OPERATING AND SERVICE MANUAL
(1966) | |
Soldering Equipment
Picture | Item | Manufacturer/ Model |
Reference Materials |
soldering stations (2)
70W |
HAKKO
DFX-888D |
HAKKO | |
Fume Extractor | PACE | ||
solder reflow oven | James Gravert | Class Documentation
(by Adam Gleason) | |
Hand Tools
Picture | Item | Manufacturer | Model Number |
Reference Materials |
DIGITAL MULTIMETERS
CEN-TECH 7 FUNCTION |
Harbor Freight | 90899 | ||
- Electronics Area hand tools should be marked with purple tape or paint.
- Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.
- Always leave the space better than you found it.
- Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make.
Benefits
- PPM members enjoy discounts at the following local merchants:
- (bring proof of membership)
Company | Website | Benefit | Directions to |
Woodcraft of Colorado Springs | 10% discount | 4438 Austin Bluffs Parkway | |
CO Lumber Specialties | 10% discount | 3636 Stone Avenue | |
GENERAL AIR | 10% discount | 3031 N Nevada Ave. | |
ACE Hardware Uintah Gardens | 10% discount | 1830 W Uintah Street | |
- Map of stores that provide PPM member discounts
- Map of helpful local resources curated by our makers
- At home LightBurn subscriptions can be purchased at a discounted rate for being a PPM member.
- The discount code is saved as a Pinned Message in our 'laser-cutter' channel in Slack.
Policies
Materials
- Donate for "General Supplies" via PayPal: bit.ly/ppmstuff
- Or, leave donations in a black payment box, or use a QR code.
Red Tags
- If equipment needs repairs, place a Red Tag on it and report it via the Pikes Peak Makerspace Slack channel #red-tags-issues
- This advises others on the malfunctioning equipment and ensures that actions can be taken to service/repair the equipment.
Related Software
Links to external sites:
- Autodesk Fusion — with integrated, cloud-based PCB design software
- KiCad — schematic capture, PCB layout, and simulation
- Fritzing — open source software to document, share, layout, and manufacture professional PCBs
Related Pages
Links to related PPM Wiki pages:
Hand-Curated Links
Links to member-recommended external sites:
- Battery Hookup — Genuine Lithium Batteries for DIY Projects
- EveryCircuit — Create, simulate, share, and explore electronic circuits
- IFIXIT — Repair guides for every thing, written by everyone
- Open Circuits — stunning cross-section photography of electrical components
- The Inner Beauty of Basic Electronics — Open Circuits feature in IEEE Spectrum
- Philips oscilloscopes — on WIKIMEDIA COMMONS
- IEEE (Education) — "leader in engineering and technology education"
- HACKADAY — community database of open-source hardware designs
- Maker's Guide to Boards — Make magazine
- CuriousMarc — Vintage HP Equipment Restoration
- DIY Solar Power with Will Prowse — on YouTube
- Right to Repair — on Wikipedia
For Additional Help
- Use the PPM Slack channel #electronics
- List of all PPM Slack channels
- Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the community.
Search the PPM Wiki — include Content pages as well as Multimedia.
Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.
Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative processes by providing shared space, shared tools, materials, software, and a knowledge base to turn their ideas into reality.