Raspberry Pi

From Pikes Peak Makerspace Wiki
Revision as of 16:44, 2 December 2021 by Warren (talk | contribs) (→‎Software)
Jump to navigation Jump to search
RPi Workstation
Raspberry Pi Workstation
(in our Electronics Area)

Safety First

Members must know the following information:

In case of emergency, call 911.
Our physical location is:
735 East Pikes Peak Avenue
Colorado Springs, CO 80903
use this when ordering pizza or an ambulance

PPM Fire Escape Plan

Fire Escape Plan maps are posted throughout the Makerspace.
There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.

First Aid

There is a FIRST AID Supply Cabinet in our Kitchen Area.
FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.

Eye Wash Stations

Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.

Personal Protective Equipment (PPE)

Wear protective equipment in all Wood and Metal Shop Areas.
Wear gloves when using Isopropyl Alcohol and other cleaners.

Hazardous Chemicals

All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.
Review the Safety Data Sheet (SDS) information of unknown products before use.
SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.
Do not bring dangerous chemicals to the makerspace.
Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.
Please DO NOT paint indoors.



Impairment

The use of PPM equipment requires you to be alert, attentive, and focused.
Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.

Classes and Training

Area Captain

(None)

Classes

Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup

For Help

Message in PPM Slack channel #electronics or #general

Or message Warren Jokinen on Slack

Tips

At times the 3b+ may seem slow or unresponsive, so check the green light at the edge of the board for activity

Equipment Lists

Hardware

1) Raspberry Pi for "Mall Map"

3b+ (heatsinks, no case)

large HDMI (VIZIO) display with remote

32GB SD card (no SSD)

wired USB keyboard and mouse (Dell)

Wi-Fi connection

"Raspberry Pi Friendly" Dell monitors (quantity 3, 4 or 5?)

2) Raspberry Pi with volumio audio player

3) Raspberry Pi from Epilog engraver area

4) Raspberry Pi from 3D Printer donation

Software

32-bit Raspberry Pi OS "Buster", (not "Bullseye")

Mathematica free on every Raspberry Pi

Python

Visual Studio Code

etc.

Donations Received

Wish List

Showcase

Other Fun Stuff

MagPi the official Raspberry Pi magazine