Laser — Epilog Zing
Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative process by providing shared space, shared tools, software, materials and a knowledge base to turn their ideas into reality.
The Laser Engraver/Cutter Area at Pikes Peak Makerspace (PPM) consists mostly of Level 3 equipment.
Additional training and certification is required to use any of our Level 3 equipment.
Laser Area hand tools should be marked with red tape or paint.
Safety First
Members must know the following information:
- In case of emergency, call 911.
- Our physical location is:
- 735 East Pikes Peak Avenue
- Colorado Springs, CO 80903
-
IN CASE OF
EMERGENCY
sign
PPM Fire Escape Plan
- Fire Escape Plan maps are posted throughout the Makerspace.
- There are 7 fire extinguishers on the fire escape plan map.
- Review the PPM Fire Escape Plan for locations.
-
PPM Emergency
Evacuation Plan.pdf -
PPM Fire
Prevention Plan.pdf -
PPM Fire Escape
Plan
First Aid
- There is a FIRST AID Supply Cabinet in our Kitchen Area.
- FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.
-
FIRST AID
Supply Cabinet -
FIRST AID
Kit
Eye Wash Stations
- Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.
-
Emergency
Eye & Face Wash
Station
Personal Protective Equipment (PPE)
- Wear protective equipment in all Wood and Metal Shop Areas.
- Wear gloves when using Isopropyl Alcohol and other cleaners.
- Gloves should not be worn when using powered equipment (saws, jointers, drills, or other equipment). Leather gloves can be worn for handling materials, but not when operating machinery.
-
Personal Protective Equipment (PPE)
Hazardous Chemicals
- All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.
- Review the Safety Data Sheet (SDS) information of unknown products before use.
- SDS information is available via this spreadsheet.
- Do not bring dangerous chemicals to the makerspace.
- Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.
- Please DO NOT paint indoors.
-
Flammables Cabinet
in the Vented Room
Other Hazards
- Avoid placing uncovered (extension) cords, hoses, cables, or wires across the floors of our shops.
Impairment
- The use of PPM equipment requires you to be alert, attentive, and focused.
- Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.
Classes and Training
New Member Orientation
Area Captain
- Jonathan Wommack (Epilog Laser)
- Area Captain Duties
Classes
- Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup
Training
- Jonathan Wommack (Epilog Laser)
-
Zing
Instruction Sheetv3.pdf
DO NOT cut materials with PVC on either laser, this will release chlorine gas which is toxic.
- ALWAYS ensure the work area interior and exterior is clean before and after your work.
- The maximum bed size for vector cutting or raster etching is 16” x 12” or less.
Events
-
TOSC tour
(2021-11-24) -
Intro to Laser Cutting
Manitou Art Center
(January 15, 2015)
For Additional Help
- Use the PPM Slack channel #laser-cutter
- List of all PPM Slack channels
The following pages contain historical information. The pages are provided for reference only.
• Introduction to the Zing Laser (15:26, 20 May 2015)
• Laser Cutting Material Table (15:41, 21 May 2015)
• Laser Cutting Acrylic (16:31, 24 November 2015)
Equipment Lists
Zing LASER
| Picture | Item | Manufacturer/ Model |
Manual | Estimated Value |
Owner |
 |
zing 30 Watt
CO2 Laser Cutter/Engraver |
Epilog Laser
10000 Laser System |
yes, and online | $5,800 |
PPM |
Model |
Value |
Zing LASER Computer
| Picture | Item | Manufacturer/ Model |
System Software |
Application Software |
Estimated Value |
Owner |
| Computer,
i7 3.4 GHz, new Dell keyboard (02/17/23) |
hp | Windows 10 Pro | Adobe Acrobat, Adobe Illustrator, |
$250 |
PPM | |
 |
Monitor, 20" widescreen | Asus
VH202 |
$100 |
PPM | ||
Model |
Software |
Software |
Value |
Hand Tools
- Laser Area hand tools should be marked with red tape or paint.
- Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.
Donations Received
Wish List
- Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make.
Benefits and Policies
- PPM members enjoy discounts at the following local merchants:
- (bring proof of PPM membership)
| Website | Benefit | Address |
|---|---|---|
| Woodcraft of Colorado Springs | 10% discount | 4438 Austin Bluffs Parkway |
| CO Lumber Specialties | 10% discount | 3636 Stone Avenue |
| GENERAL AIR | 10% discount | 3031 N Nevada Ave. |
| ACE Hardware Uintah Gardens | 10% discount | 1830 W Uintah Street |
Equipment Reservations
Materials
- DO NOT cut materials with PVC on either laser, this will release chlorine gas which is toxic.
- Avoid reflective material.
- Donate for "Wood Sheet for Laser" via PayPal: bit.ly/ppmstuff
- Or, leave donations in a black payment box, or use a QR code.
Red Tags
Scrap and Trash
- Trash day is TUESDAY (Extra pickups can be called from Waste Connections for around $75)
- Recycling day is MONDAY (96 gallon tote should be placed out back by the dumpster)
- Single Stream Recycling provided by Waste Connections. Paper, cardboard, cans, glass, and one time use plastics.
- Empty interior trash cans into our dumpster at the back (south side) of the building.
- Always leave the space better than you found it.
Software
Design Software
Printing Software
- Adobe Acrobat
Member Showcase
-
Engraved photo
by Chris Stevens
(09/09/22)
-
Engraved journal cover
by Marvin Harrell
(05/09/22) -
Round PCB
PPM clock -
PPM engraved
PCB keychain -
Minnesota NICE
(May 29, 2015)
See Also
Links to other PPM Wiki pages (internal links):
Curated Links
Links to other sites (external links):
- Homebrew CO2 Laser Page -- by John Doran (Epilog VP of Engineering)
- ImagR -- Prepare your image for laser engraving
- Cut boxes with a laser cutter: MakerCase or Boxes.py
- Bell Laser - After market parts for laser machines
- Laser Research Optics - Alternative and cheaper sources of lenses
Other Fun Stuff
Links to other sites (external links):
Search the PPM Wiki — include Content pages as well as Multimedia.
Contact Us if you cannot find your answer here on our Wiki or if you notice any outdated information.