Wood Shop

From Pikes Peak Makerspace Wiki
Jump to navigation Jump to search
Level 3 badge

The Wood Shop Area at Pikes Peak Makerspace (PPM) consists of

both Level 2  and Level 3 equipment.

Additional training is required to use our Level 3 equipment.

 Wood Shop Area  hand tools should be marked with green tape or paint or powder coating.

Wood Shop Area
 Wood Shop Area  (03/15/22) 

Safety First

Members must know the following information:

In case of emergency, call 911.
Our physical location is:
735 East Pikes Peak Avenue
Colorado Springs, CO 80903
use this when ordering pizza or an ambulance

PPM Fire Escape Plan

Fire Escape Plan maps are posted throughout the Makerspace.
There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.

First Aid

There is a FIRST AID Supply Cabinet in our Kitchen Area.
FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.

Eye Wash Stations

Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.

Personal Protective Equipment (PPE)

Wear protective equipment in all Wood and Metal Shop Areas.
Wear gloves when using Isopropyl Alcohol and other cleaners.

Hazardous Chemicals

All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.
Review the Safety Data Sheet (SDS) information of unknown products before use.
SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.
Do not bring dangerous chemicals to the makerspace.
Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.
Please DO NOT paint indoors.



Impairment

The use of PPM equipment requires you to be alert, attentive, and focused.
Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.

Classes and Training

New Member Orientation

Area Captains -- Volunteers needed

Dust Deputy -- Vincent Flowers
Woodshop Configuration Captain -- Vincent Flowers
Lathe Captain -- Lucas Weismann
Table Saw Captain -- Bri Pomerantz
Sanding Station Captain -- Volunteers needed
Bandsaw Captain -- Jeff Rossmanith
View all PPM Area Captains

Area Captain Duties

To help out in the Wood Shop Area, contact any of the Area Leaders on Slack.

Classes

Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup

Training

Check-in/ Check-out REQUIRED (use the QR Code)
Let the tool do the work. Don't force it.

For Additional Help

Use the PPM Slack channel #wood-shop



Warn.png The following pages contain historical information. The pages are provided for reference only.

Introduction to Woodworking‏‎ (14:45, 15 November 2015)

Woodworking terminology‏‎


Equipment Lists

POWERMATIC Equipment List

Picture Item Manufacturer Model
Number
Power
Requirements
Estimated
Value
Manual Owner Status Training Video Link Problem
Description
6" Belt/
12" Disc
Combination Sander

Level 3 badge
Powermatic-logo
POWERMATIC 30B 3-phase Replacement Parts PPM Not yet installed

(01/19/23)

(500 lbs)
POWERMATIC planer
planer, 15", 4" Dust Port
Level 3 badge
Powermatic-logo
POWERMATIC 15HH Single Phase, 230V, 60Hz, 15A

$4,000

Operating Instructions and Parts Manual

(2017)

PPM Up and Operational

(01/08/22)

3520B POWERMATIC lathe

lathe, 18" extension, swing away tail stock, ONEWAY bowl chuck
Level 3 badge

Powermatic-logo
POWERMATIC 3520B Single Phase, 220V, 60Hz

$7,000

POWERMATIC whitepaper PPM
(donated by 
Jim Kueck)
Up and Operational (03/27/22)
POWERMATIC bandsaw
14" bandsaw, rip and cross-cut fences, 5" riser
Level 3 badge
Powermatic-logo
POWERMATIC PWBS‑14 Single Phase, 115V, 60Hz, 11A

$900

Operating Instructions and Parts Manual PPM
(donated by 
Jim Kueck)

table saw, 2 hp, 48" Beisemeyer fence
Level 3 badge
Powermatic-logo
POWERMATIC PM66 3-phase

$1,500

no PPM
(donated by 
Jim Kueck)
Picture
Item
Manufacturer
Model
Number
Power
Requirements
Estimated
Value
Manual
Owner
Status
Training Video Link
Problem
Description


Sharpening and Sanding Equipment List

Picture Item Manufacturer Model
Number
Estimated
Value
Manual Owner Status Problem
Description
Grinder station
8" bench grinder on pedestal, blue and white grinding stones, Wolverine and Veritas sharpening devices, buffing wheel and compounds JET JWBG‑8 

$500

Wolverine Dressing Jig Instructions
PPM
(donated by David Wasmer, Sr.)
Up and Operational
variable speed buffer and buffing wheels
Logo DeWalt
DeWALT DWP849

$200

PPM
(donated by David Wasmer, Sr.)
Up and Operational
3M

sanding belts, disks and sheets

3M logo

$100

PPM
(donated by David Wasmer, Sr.)
Granite block
precision ground granite block, 12"x18"x3" ? ?

$200

PPM
(donated by David Wasmer, Sr.)
Picture
Item
Manufacturer
Model
Number
Estimated
Value
Manual
Owner
Status
Problem
Description
Do not store tools, or anything, on our granite block to avoid damage to its surface.

Wood Shop Equipment List

Picture Item Manufacturer Model
Number
Power Requirements Estimated
Value
Manual Owner Status Problem
Description
BAYLEIGH AIR FILTRATION SYSTEM
AIR FILTRATION SYSTEM

with remote

BAILEIGH AFS-2400 single phase,

110 Volts,

14 Amps,

60HZ

($1,853 new) OPERATOR'S MANUAL PPM (donated by TITAN ROBOTICS) Installed

04/07/22

RIDGID Oscillating Sander
Oscillating

Edge Belt /

Spindle Sander

RIDGID EB4424 0 single phase,

110 Volts,

6 Amps,

60HZ

$250

Manual On loan from

Wentworth Aggregates LLC

Miter saw with new dust hood
12" Sliding Compound

Miter Saw, dust hood & RIGID vacuum

Logo DeWalt
DeWALT DW708 single phase,

110 Volts,

13 Amps,

60HZ

$350

Les Working (12/29/21)
JET Jointer
8" Jointer with Shelix cutting head installed JET JJ-8CS single phase,

110 Volts,

15 Amps,

60HZ

$1,000

PPM
WORK SHARP sharpener
wood tool sharpener WORK SHARP WS3000 single phase,

110 Volts,

2 Amps,

60HZ

$200

John Norton
DELTA Router Table
Router and Shaper with bits on rolling carts DELTA ? single phase,

110 Volts,

9 Amps,

60HZ

?

PPM Working (02/23/22)
Fan rolling black.jpg
24" 2-speed fan

in rolling frame

UTILITECH PRO ?

?

PPM Working, Repaired by Eman

(04/27/22)

Box fan
Box fan,

20", 3-speed

LASKO N/A

$30

PPM
6" Disk 4" Belt Sander WEN 6502T single phase,

110 Volts,

4.3 Amps,

60HZ

$120

PPM
1" x 30" belt & 5" disk sander Dremel ? single phase,

110 Volts,

3 Amps,

60HZ

$75

PPM
Free standing dust collector & vacuum Dust Deputy & Craftsmen ?

$150

PPM
Dust Collector 1.5HP 6" inlet DELTA ?

$550

PPM
Floor drill press PORTER-CABLE ? single phase,

110 Volts,

8 Amps,

60HZ

$500

PPM
Mobile Base, Adjustable Universal HTC HTC2000 N/A

$80

yes, and

online

PPM
(donated by 
Jim Kueck)
overarm table saw blade guard and dust collector SOMMERVILLE DESIGN EXCALIBUR N/A

$150

no PPM ?
Picture
Item
Manufacturer
Model
Number
Power Requirements
Estimated
Value
Manual
Owner
Status
Problem
Description


FESTOOL Equipment List -- Level 3 Tools

Picture Item Manufacturer Model
Number
Estimated
Value
Owner Status Problem
Description
Festool Track Saw
Track Saw
Level 3 badge.png
Festool-logo.min
TS 55 EQ

$550

John Norton Working
Festool Half Sheet Sander
Sander (Half Sheet)
Level 3 badge.png
Festool-logo.min
RS 2-E-Plus

$350

John Norton Working
Festool Orbital Sander
Sander (Orbital)
Level 3 badge.png
Festool-logo.min
ETS 150/5 EQ-Plus

$350

John Norton Working
Festool Dust Extractor
Dust Collector
Level 3 badge.png
Festool-logo.min
CLEANTEC CT 22 E

$600

John Norton Working
Multifunction Table
Level 3 badge.png
Festool-logo.min
1080

$760

John Norton Working
Picture
Item
Manufacturer
Model
Number
Estimated
Value
Owner
Status
Problem
Description

Power Tools

'A Tool Is Just An Opportunity With A Handle' ~Kevin Kelly

Picture Item Manufacturer Model
Number
Estimated
Value
Manual Owner Status Problem
Description
Milwaukee Compact Router
COMPACT ROUTER

M18 FUEL

Milwaukee

2723-20

$200

link PPM New,

01/01/23

JIG SAW Milwaukee
JIG SAW

M18 FUEL

D-Handle

Milwaukee

2737-20

$200

link PPM New,

12/17/22

Makita Circular Saw
Circular Saw,

185mm

Makita logo
Makita

5007NB

PPM
(donated by David Wasmer, Sr.)
discontinued product
Makita Router 3601B
Router
Makita logo
Makita

3601B

PPM
(donated by David Wasmer, Sr.)
DeWALT sawsall
RECIPROCATING SAW
Logo DeWalt
DeWALT

DW304P

$100

Greg C. (?) ? discontinued product
DeWALT jigsaw
JIG SAW
Logo DeWalt
DeWALT

DW331

$150

John Norton ?
BOSCH jigsaw 1590EVS
Jig Saw BOSCH 1590EVS PPM ?
AIR NAILER
AIR NAILER/

STAPLER

CENTRAL PNEUMATIC 64269

$30

PPM New, (12/14/21)
Biscuit Joiner In Red Case
Biscuit

Joiner

Craftsman

$130

PPM

(donated by

John Norton)

Circular

Saw

Craftsman

$50

PPM
Belt Sander (handheld) Craftsman

$50

PPM
Belt Sander (handheld)
Logo RYOBI
RYOBI ???
Sander PORTER-CABLE
Orbital Sander PORTER-CABLE Quicksand PPM
Sander Mouse

Mouse Sander/ Polisher

Logo BLACK&DECKER.png
BLACK&DECKER FMS50

$25

PPM
Picture
Item
Manufacturer
Model
Number
Estimated
Value
Manual
Owner
Status
Problem
Description


Clamps

Item Manufacturer Quantity Price
Each
Owner Status Problem
Description
6" Wooden Handscrew Clamps ROCKLER Wooden Handscrew Clamps

2

$14

PPM
8" Quick Clamp Irwin Quick Grip

2

$10

PPM
12" Quick Clamp Irwin Quick Grip

2

$12

PPM
36" Quick Clamp Irwin Quick Grip

1

$36

Bill Epperson
30" Bessey Pipe Bar Clamp Bessey

4

$20

Bill Epperson
48" Bessey Pipe Bar Clamp Bessey

2

$20

Bill Epperson
60" Bessey Pipe Bar Clamp Bessey

2

$20

Bill Epperson
36" Quick Release Steel Bar Clamp Jorgensen CABINENT MASTER 8036

5

$50

PPM
6" Quick Release Bar Clamp PITTSBURGH

2

$3

Bill Epperson
12" Quick Release Bar Clamp PITTSBURGH

0

PPM
18" Quick Release Bar Clamp PITTSBURGH

0

PPM
24" Quick Release Bar Clamp PITTSBURGH

2

$6

PPM
30" Quick Release Bar Clamp PITTSBURGH

0

PPM
36" Quick Release Bar Clamp PITTSBURGH ITEM 60539

6

$9

PPM
(donated by David Wasmer, Sr.)
60" Quick Release Bar Clamp PITTSBURGH ITEM 60673

2

$18

PPM
50" CLAMP & CUT EDGE GUIDE PITTSBURGH ITEM 66581

1

$20

PPM
6" Ratcheting Bar Clamp PITTSBURGH

0

PPM
12" Ratcheting Bar Clamp PITTSBURGH

6

$4

PPM
24" Ratcheting Bar Clamp PITTSBURGH

0

PPM
Item
Manufacturer
Quantity
Price
Each
Owner
Status
Problem
Description

Hand Tools

Picture Item Manufacturer Model
Number
Estimated
Value
Owner Status Problem
Description
Ten million dollar stick
10 Million Dollar Stick FastCap

$20

PPM Working
METAL DETECTOR
HAND HELD

METAL DETECTOR

EASYVIEW TECHNOLOGY GC-101H

$20

PPM Working
Forstner bit set
Forstner bit set

(16 bits)

?

PPM

(donated by Mike Mike)

Working
Picture
Item
Manufacturer
Model
Number
Estimated
Value
Owner
Status
Problem
Description
 Wood Shop Area  hand tools should be marked with green tape or paint or powder coating.
Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Donations Received

Wish List

A SawStop table saw is on order! (01/3/23)

Benefits and Policies

PPM members enjoy discounts at the following local merchants:
(bring proof of membership)
Company Website Benefit Directions to
Logo WOODCRAFT
Woodcraft of Colorado Springs 10% discount    4438 Austin Bluffs Parkway
Logo CO Lumber
CO Lumber Specialties 10% discount 3636 Stone Avenue
Logo General Air
GENERAL AIR 10% discount 3031 N Nevada Ave.
Logo ACE
ACE Hardware Uintah Gardens 10% discount 1830 W Uintah Street
Map of stores that provide PPM member discounts
Map of helpful local resources curated by our makers
At home LightBurn subscriptions can be purchased at a discounted rate for being a PPM member.
The discount code is saved as a Pinned Message in our 'laser-cutter' channel in Slack.

Equipment Reservations

Materials

Donate for "Sheet Goods" via PayPal: bit.ly/ppmstuff
Or, leave donations in a black payment box, or use a QR code.

Scrap and Trash

Trash day is MONDAY
Recycling day is MONDAY (96 gallon tote)
Single Stream Recycling provided by Waste Connections. Paper, cardboard, cans, glass, and one time use plastics.
Empty recycling and trash into our dumpster at the back (south side) of the building.
Always leave the space better than you found it.

Software

Fusion 360
Inkscape
VCarve

Member Showcase

For even more member projects, visit our #showcase channel on Slack, or follow our social media links.


See Also

Links to other PPM Wiki pages (internal links):

CNC Area
Shed

Curated Links

Links to other sites (external links):

LibraryThing -- Our wood working-related books
Fine Wood Working Magazine Shop Tips

Other Fun Stuff

Links to other sites (external links):

Vintage Machinery Photo Index -- POWERMATIC
Stumpy Nubs Woodworking Journal - YouTube
Inkscape Tutorial, For Engineers And Shaper Origin Users
Welding for Woodworkers



Search the PPM Wiki — include Content pages as well as Multimedia.

Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.