Vented Room

Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative process by providing shared space, shared tools, materials and a knowledge base to turn their ideas into reality.

We provide a vented, well-lit room for painting and staining, and so forth. It is roughly 14 x 6.5 sq. ft. (730 cu. ft.)

Safety First

Members must know the following information:

In case of emergency, call 911.

Our physical location is:

735 East Pikes Peak Avenue

Colorado Springs, CO 80903

use this when ordering pizza or an ambulance

IN CASE OF
EMERGENCY
sign

PPM Fire Escape Plan

Fire Escape Plan maps are posted throughout the Makerspace.

There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.

PPM Emergency
Evacuation Plan.pdf
PPM Fire
Prevention Plan.pdf
PPM Fire Escape
Plan

First Aid

There is a FIRST AID Supply Cabinet in our Kitchen Area.

FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.

FIRST AID
Supply Cabinet
FIRST AID
Kit

Eye Wash Stations

Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.

Emergency
Eye & Face Wash
Station

Personal Protective Equipment (PPE)

Wear protective equipment in all Wood and Metal Shop Areas.

Wear gloves when using Isopropyl Alcohol and other cleaners.

Personal Protective Equipment (PPE)

Hazardous Chemicals

All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.

Review the Safety Data Sheet (SDS) information of unknown products before use.

SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.

Do not bring dangerous chemicals to the makerspace.

Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.

Please DO NOT paint indoors.

Flammables Cabinet
in the Vented Room

Impairment

The use of PPM equipment requires you to be alert, attentive, and focused.

Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.

Classes and Training

New Member Orientation

Classes

Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup

Training

Use the Sign In Sheet

Step-By-Step Process for Using the Vented Room

Set fan and timer
Sign in with QR code
Setup paper
Wear PPE
Put away all holding stands and materials after the final coat
Absolutely no paint or finishing materials left out, ever
Remove workpiece as soon as dry
Items left more than 12 hours will be removed

Rules for the Vented Room

All hazardous chemicals, including spray paint, stains, and other approved items must be stored in the yellow hazardous chemical storage cabinet located in the vented room
Review the Safety Data Sheet (SDS) information of unknown products before use
SDS information is available via the QR code on the hazardous chemical storage cabinet
Do not bring dangerous chemicals to the makerspace
Must be continuously ventilated during occupied hours
Take frequent fresh air breaks while painting
Leave painted areas if you experience eye watering, headaches, dizziness, or breathing problems
Turn on the timer and leave the door closed while in use
When done, leave timer on to continue ventilating the room properly
Use the correct P.P.E (Personal Protective Equipment) when you’re painting. Items such as a spray painting mask, and gloves are vital
Before you start to use your spray cans, make sure that you store them away from heat and fire. The aerosols are highly combustible, and will cause a lot of damage and potentially a lot of harm.
Clean your entire area after your job is complete; including, but not limited to, tables, walls, floors, cabinets, all materials put away
Do not leave anything out long term

For Additional Help

Use the PPM Slack channel #general

Equipment List

Vented Room Equipment

Picture	Item	Manufacturer	Model Number	Estimated Value	Owner	Status	Problem Description
	Exhaust fan				PPM	4-hour timer installed (05/17/22)
	Flammable material storage cabinet, 43" wide 18" deep 65" tall	A&A SHEET METAL PRODUCTS, INC.	A245	$950	PPM (donated by Qualtek Manufacturing)
	storage cabinet, metal (grey)			?	PPM
	storage cabinet, metal, with key, (tan)			?	PPM
	DESIGN STATION ONE 68"x 34", adjustable height, on wheels	PPM (Mathew Palfenier)		?	PPM
	DESIGN STATION TWO 73"x 34", adjustable height, on wheels	PPM (Mathew Palfenier)		?	PPM
Picture	Item	Manufacturer	Model Number	Estimated Value	Owner	Status	Problem Description

Flammables cabinet label

Hand Tools

Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Donations Received

Wish List

Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make.

Benefits and Policies

PPM members enjoy discounts at the following local merchants:

(bring proof of membership)


Company	Website	Benefit	Directions to
	Woodcraft of Colorado Springs	10% discount	4438 Austin Bluffs Parkway
	CO Lumber Specialties	10% discount	3636 Stone Avenue
	GENERAL AIR	10% discount	3031 N Nevada Ave.
	ACE Hardware Uintah Gardens	10% discount	1830 W Uintah Street

Map of stores that provide PPM member discounts

Map of helpful local resources curated by our makers

At home LightBurn subscriptions can be purchased at a discounted rate for being a PPM member.

The discount code is saved as a Pinned Message in our 'laser-cutter' channel in Slack.

Equipment Reservations

Materials

Safety Data Sheets

Review SDS information of unknown products before use. SDS available here and via QR code in hazardous chemical storage.

Do not bring dangerous chemicals to the space.

Spray paint, stains, and other approved items must be sto in the flammables cabinet in the vented room.

Do not paint indoors.

Spill Clean-up Kit

Red Tags

Use a Red Tag, which can be found in the red tag area, to designate broken equipment.

Scrap and Trash

Trash day is MONDAY

Recycling day is MONDAY (96 gallon tote)

Single Stream Recycling provided by Waste Connections. Paper, cardboard, cans, glass, and one time use plastics.

Empty recycling and trash into our dumpster at the back (south side) of the building.

Always leave the space better than you found it.

Other Fun Stuff

Links to other sites (external links):

Bill Making Stuff -- "Scratch Builder" on YouTube

Search the PPM Wiki — include Content pages as well as Multimedia.

Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.