Introduction to Woodworking
Woodworking comes in a wide variety of flavors ranging from using a hand saw to cut a 2x4 to creating intricate inlays in a nice piece of Mahogany and beyond. No matter what your taste, there are a few things to keep in mind while working in the woodshop to make it a safe and pleasant environment.
Safety
Remain focused while using woodworking equipment.
Think about what you are doing while using the equipment. Plan out your cut before you turn the equipment on. Know where your hands are going to land and ensure that any aids that you'll need (push stick) are within arms reach.
Personal Protective Equipment
While woodworking, be cognizant of your attire. It should not be loose, cover your hands, or otherwise have the potential to get snagged and pulled into a piece of equipment. Also, safety glasses, hearing protection, and dust masks (especially while sanding) are important.
Know how to use the tools
Learn about the safety considerations that you need to account for with each specific tool. Some of the considerations will be common to each tool, and some will be unique. It is strongly advised that you learn the specifics about the table saw before you use it, as its safety considerations revolve more around kickback which is not as 'common sense' of a concern as keeping your fingers out of the blade.
Wood Allergies
Some woods, such as Mansonia, can cause serious allergic reactions. Do yourself and others that might be walking through the woodshop a favor and do a little bit of research on the wood and take the appropriate precautions.
Courtesy
Keep it clean
Cleaning up the area before you leave is a good general rule for any shared work environment. With the woodshop in particular, a mess can be made very quickly with just a quick cut or two.
Terminology
There are some common terms that can be found on the woodworking terminology page that you might find helpful when trying to decipher things written in the woodworking section.
Tools
There are a plethora of different tools in woodworking and each has a fairly unique specialty. Some of the more common tools include:
Table Saw
The table saw functions as the main workhorse of the woodshop. It offers a fair bit of versatility with the use of jigs.
Band Saw
The band saw has a thin kerf which makes it an excellent choice for resawing a board. Smaller blades can also be installed in the band saw for curved pieces.
Jointer
The jointer is used in conjunction with the depth planer to mill wood. The jointer's job is to first make one face of the board straight and flat. Once the face is flat, that face is run against the fence to make an adjoining edge straight and 90 degrees.
Depth Planer
The depth planer's job is to make the non-jointed face parallel to the jointed face. It also allows you to make boards a uniform thickness.
Router
A router is a multifunction rotary tool. It has specialized bits for a wide variety of applications, and is most commonly used for joinery and edge embellishment.
Drill Press
The drill press allows you to drill holes into the wood at a consistent angle and to an adjustable depth.
Miter Saw
A miter saw consists of a powered circular saw that can be positioned at a variety of angles and lowered onto a board positioned against a backstop called the fence. It is used to make a quick, accurate crosscut in a workpiece at a selected angle.
Watch this video to learn more about the basic function and safety
Sanders
There are many different types of sanders and each has their specialty however they all function to smooth the surface of the wood.
Scroll Saw
The scroll saw is used for delicate work to produce very fine curves and cuts.
Lathe
A lathe spins the work piece around and allows cuts to be made by resting the cutting tool on the tool rest and easing it into the work piece. A lathe is commonly used to make bowls, pens, table legs, and handles.
For Additional Help
Search the PPM Wiki — include Content pages as well as Multimedia.
Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.
Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative processes by providing shared space, shared tools, materials, software, and a knowledge base to turn their ideas into reality.