Laser Cutting Acrylic

Overview

Acrylic is a type of plastic that can be easily cut and formed to be used in many applications.

Safety

ALWAYS keep a close eye on the machine when cutting acrylic due to its flammability.

Two Main Types of Acrylic Sheet

Extruded Acrylic

Created by extruding molten acrylic pellets through a machine.

Pros
- Cheaper
- Better tolerances
- Easier to bend and form
- Easier to flame polish edge
Cons
- Easy to crack
- Engraving produces grey frost
- Lower optical clarity when compared to cast (still very high)
- Less scratch resistant

Cast Acrylic

Created by pouring molten acrylic pellets into a mold.

Pros
- Produces better results when engraving (white frost)
- Comes in many colors
- Machines better
- Higher optical clarity
- More scratch resistant
Cons
- Expensive (your kid might not be going to college)

Cutting/Engraving

Table for common settings

SUBSTRATE	250 DPI RASTER ENGRAVING SPEED/POWER	400 DPI RASTER ENGRAVING SPEED/POWER	500 DPI RASTER ENGRAVING SPEED/POWER	VECTOR CUTTING SPEED/POWER/FREQUENCY
Acrylic	100/100	100/80	100/60	⅛ (3 mm) – 15/100/5000
				¼ (6.4 mm) – 5/100/5000
				(multiple passes may allow cutting of thicker materials)

Tips

If engraving, try to use cast acrylic as it will produce better results
When vector cutting, use masking tape on the backside of the piece to protect against flair up scorch marks as the laser hits the cutting grid

For Additional Help

Search the PPM Wiki — include Content pages as well as Multimedia.

Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.

Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative processes by providing shared space, shared tools, materials, software, and a knowledge base to turn their ideas into reality.