Vinyl Cutting

Vinyl Cutting Area

File:Training Level 2 icon.pdf

The Vinyl Cutting Area at Pikes Peak Makerspace consists mostly of Level 2 equipment.

Additional training is required to use our Level 2 equipment.

Safety First

Members must know the following information:

In case of emergency, call 911.

Our physical location is:

735 East Pikes Peak Avenue

Colorado Springs, CO 80903

use this when ordering pizza or an ambulance

IN CASE OF
EMERGENCY
sign

PPM Fire Escape Plan

Fire Escape Plan maps are posted throughout the Makerspace.

There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.

PPM Emergency
Evacuation Plan.pdf
PPM Fire
Prevention Plan.pdf
PPM Fire Escape
Plan

First Aid

There is a FIRST AID Supply Cabinet in our Kitchen Area.

FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.

FIRST AID
Supply Cabinet
FIRST AID
Kit

Eye Wash Stations

Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.

Emergency
Eye & Face Wash
Station

Personal Protective Equipment (PPE)

Wear protective equipment in all Wood and Metal Shop Areas.

Wear gloves when using Isopropyl Alcohol and other cleaners.

Personal Protective Equipment (PPE)

Hazardous Chemicals

All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.

Review the Safety Data Sheet (SDS) information of unknown products before use.

SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.

Do not bring dangerous chemicals to the makerspace.

Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.

Please DO NOT paint indoors.

Flammables Cabinet
in the Vented Room

Impairment

The use of PPM equipment requires you to be alert, attentive, and focused.

Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.

Classes and Training

Area Captain

(Open)

Classes

Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup

For Help

Message in PPM Slack channel #vinyl-cutter

Tips

Some vinyl materials (e.g. Con-Tact brand paper) contain PVC. Do not cut these on the laser engravers.

Pick the small Application launcher button from CorelDRAW, and then "Send Cut Lines to CM3".

If you receive a no Media Error, and your job pauses, try pressing ENTER to override the sensor and continue your cutting.

To turn on the lights on the vinyl cutter cart, use the remote and point at the receiver near the power strip.

Equipment Lists

24" Graphtec cutter
Picture	Item	Manufacturer	Model Number	Estimated Value	Manual	Serial Number	Owner	Status	Problem Description
	24" Cutting Plotter File:Training Level 2 icon.pdf	Graphtec	CE5000-60	$500	yes	A60810979	PPM (donated by PARADIGM SYSTEMS)	working
	Vinyl cutter cart lighting remote				no		PPM	working
Picture	Item	Manufacturer	Model Number	Estimated Value	Manual	Serial Number	Owner	Status	Problem Description

34" VEVOR cutter
Picture	Item	Manufacturer	Model Number	Estimated Value	Manual	Serial Number	Owner	Status	Problem Description
	34" vinyl cutter	VEVOR	KI-870				Theo	??	In storage
Picture	Item	Manufacturer	Model Number	Estimated Value	Manual	Serial Number	Owner	Status	Problem Description

Computers
Picture	Item	Manufacturer	Model Number	Estimated Value	Manual	Serial Number	Owner	Status	Problem Description
	PC	HP	h8-1117c	$250	no		PPM	working
	monitor	Dell	V226HQL	$100	no		PPM	working
	wired mouse and keyboard	Amazon (both)	amazon basics (both)	$10 each	no		PPM	working
Picture	Item	Manufacturer	Model Number	Estimated Value	Manual	Serial Number	Owner	Status	Problem Description