Vented Room

Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative process by providing shared space, shared tools, materials and a knowledge base to turn their ideas into reality.

We provide a vented, well-lit room for painting and staining, and so forth. It is roughly 14 x 6.5 sq. ft. (730 cu. ft.)

Burst welcome page

Safety First

Members must know the following information:

In case of emergency, call 911.

Our physical location is:

735 East Pikes Peak Avenue

Colorado Springs, CO 80903

• 
  IN CASE OF
  EMERGENCY
  sign

PPM Fire Escape Plan

Fire Escape Plan maps are posted throughout the Makerspace.

There are 7 fire extinguishers on the fire escape plan map.

Review the PPM Fire Escape Plan for locations.

• 
  PPM Emergency
  Evacuation Plan.pdf
• 
  PPM Fire
  Prevention Plan.pdf
• 
  PPM Fire Escape
  Plan

First Aid

There is a FIRST AID Supply Cabinet in our Kitchen Area.

FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.

• 
  FIRST AID
  Supply Cabinet
• 
  FIRST AID
  Kit

Eye Wash Stations

Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.

• 
  Emergency
  Eye & Face Wash
  Station

Personal Protective Equipment (PPE)

Wear protective equipment in all Wood and Metal Shop Areas.

Wear gloves when using Isopropyl Alcohol and other cleaners.

Gloves should not be worn when using powered equipment (saws, jointers, drills, or other equipment). Leather gloves can be worn for handling materials, but not when operating machinery.

• 
  Personal Protective Equipment (PPE)

Hazardous Chemicals

All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.

Review the Safety Data Sheet (SDS) information of unknown products before use.

SDS information is available via this spreadsheet.

Do not bring dangerous chemicals to the makerspace.

Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.

Please DO NOT paint indoors.

• 
  Flammables Cabinet
  in the Vented Room

Other Hazards

Avoid placing uncovered (extension) cords, hoses, cables, or wires across the floors of our shops.

Impairment

The use of PPM equipment requires you to be alert, attentive, and focused.

Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.

Classes and Training

Classes

Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup

Training

Use the Sign In Sheet

Step-By-Step Process for Using the Vented Room

• Set fan and timer
• Sign in with QR code
• Setup paper
• Wear PPE (Personal Protective Equipment)
• Put away all holding stands and materials after the final coat
• Absolutely no paint or finishing materials left out, ever
• Remove workpiece as soon as dry
• Items left more than 12 hours will be removed

Rules for the Vented Room

• All hazardous chemicals, including spray paint, stains, and other approved items must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room
• Review the Safety Data Sheet (SDS) information of unknown products before use
• SDS information is available via the QR code on the hazardous chemical storage cabinet
• Do not bring dangerous chemicals to the makerspace
• Must be continuously ventilated during occupied hours
• Take frequent fresh air breaks while painting
• Leave painted areas if you experience eye watering, headaches, dizziness, or breathing problems
• Turn on the timer and leave the door closed while in use
• When done, leave timer on to continue ventilating the room properly
• Use the correct PPE when you’re painting. Items such as a spray painting mask, and gloves are vital
• Before you start to use your spray cans, make sure that you store them away from heat and fire. The aerosols are highly combustible, and will cause a lot of damage and potentially a lot of harm.
• Clean your entire area after your job is complete; including, but not limited to, tables, walls, floors, cabinets, all materials put away
• Do not leave anything out long term

For Additional Help

Use the PPM Slack channel:

#computing

Equipment List

Vented Room Equipment

Picture	Item	Manufacturer	Estimated Value	Owner
	Exhaust fan, with 4-hour timer			PPM
	Flammable material storage cabinet, 43" wide 18" deep 65" tall	A&A SHEET METAL PRODUCTS, INC., model number A245	$950	PPM (donated by Qualtek Manufacturing)
	storage cabinet, metal (grey)		?	PPM
	storage cabinet, metal, with key, (tan)		?	PPM
	DESIGN STATION ONE 68"x 34" table, adjustable height, on wheels	PPM (Mathew Palfenier)	?	PPM
	DESIGN STATION TWO 73"x 34" table, adjustable height, on wheels	PPM (Mathew Palfenier)	?	PPM
Picture	Item	Manufacturer	Estimated Value	Owner

• 
  Flammables cabinet label

Hand Tools

Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Wish List

Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make.

Benefits and Policies

PPM members enjoy discounts at the following local merchants:

(bring proof of PPM membership)

Website	Benefit	Address
Woodcraft of Colorado Springs	10% discount	4438 Austin Bluffs Parkway
CO Lumber Specialties	10% discount	3636 Stone Avenue
GENERAL AIR	10% discount	3031 N Nevada Ave.
ACE Hardware Uintah Gardens	10% discount	1830 W Uintah Street

Materials

Safety Data Sheets

Review SDS information of unknown products before use. SDS available here and via QR code in hazardous chemical storage.

Do not bring dangerous chemicals to the space.

Spray paint, stains, and other approved items must be stored in the flammables cabinet in the Vented Room.

Do not paint indoors.

• 
  Spill Clean-up Kit

Red Tags

Scrap and Trash

Trash day is TUESDAY (Extra pickups can be called from Waste Connections for around $75)

Recycling day is MONDAY (96 gallon tote should be placed out back by the dumpster)

Single Stream Recycling provided by Waste Connections. Paper, cardboard, cans, glass, and one time use plastics.

Empty interior trash cans into our dumpster at the back (south side) of the building.

Always leave the space better than you found it.

Other Fun Stuff

Links to other sites (external links):

Bill Making Stuff -- "Scratch Builder" on YouTube

---

Search the PPM Wiki — include Content pages as well as Multimedia.

Contact Us if you cannot find your answer here on our Wiki or if you notice any outdated information.