Wood Shop: Difference between revisions

← Older edit Newer edit →

VisualWikitext

Revision as of 17:49, 10 April 2022

The Wood Shop Area at Pikes Peak Makerspace (PPM) consists of

both Level 2 and Level 3 equipment.

Additional training is required to use our Level 3 equipment.

Wood Shop Area hand tools should be marked with green tape or paint or powdercoating.

Wood Shop Area

Wood Shop Area 03/15/22

Safety First

Members must know the following information:

In case of emergency, call 911.

Our physical location is:

735 East Pikes Peak Avenue

Colorado Springs, CO 80903

IN CASE OF
EMERGENCY
sign

PPM Fire Escape Plan

Fire Escape Plan maps are posted throughout the Makerspace.

There are 7 fire extinguishers on the fire escape plan map.

Review the PPM Fire Escape Plan for locations.

PPM Emergency
Evacuation Plan.pdf
PPM Fire
Prevention Plan.pdf
PPM Fire Escape
Plan

First Aid

There is a FIRST AID Supply Cabinet in our Kitchen Area.

FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.

FIRST AID
Supply Cabinet
FIRST AID
Kit

Eye Wash Stations

Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.

Emergency
Eye & Face Wash
Station

Personal Protective Equipment (PPE)

Wear protective equipment in all Wood and Metal Shop Areas.

Wear gloves when using Isopropyl Alcohol and other cleaners.

Gloves should not be worn when using powered equipment (saws, jointers, drills, or other equipment). Leather gloves can be worn for handling materials, but not when operating machinery.

Personal Protective Equipment (PPE)

Hazardous Chemicals

All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.

Review the Safety Data Sheet (SDS) information of unknown products before use.

SDS information is available via this spreadsheet.

Do not bring dangerous chemicals to the makerspace.

Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.

Please DO NOT paint indoors.

Flammables Cabinet
in the Vented Room

Other Hazards

Avoid placing uncovered (extension) cords, hoses, cables, or wires across the floors of our shops.

Impairment

The use of PPM equipment requires you to be alert, attentive, and focused.

Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.

Classes and Training

Area Leaders

Mike Kentta, Rodney Roy, Henry Doheny

View all PPM Area Captains

Area Captain Duties

To help out in the Wood Shop Area, contact any of the Area Leaders on Slack.

Classes

Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup

Training

PPM Band Saw
Safety and Operation
(POWERMATIC)
PPM Jointer
Safety and Operation
(JET)
PPM Router
Safety and Operation
PPM Table Saw
Safety and Operation
(POWERMATIC)

Tips

Leave the space better than you found it.

Let the tool do the work. Don't force it.

For Additional Help

Use the PPM Slack channel #wood-shop

The following pages contain historical information. The pages are provided for reference only.

• Introduction to Woodworking‏‎ (14:45, 15 November 2015)

• Table saw‏‎ (08:08, 25 November 2015)

• Woodworking terminology‏‎

Equipment Lists

POWERMATIC Equipment List

Picture	Item	Manufacturer	Model Number	Power Requirements	Estimated Value	Manual	Owner	Status	Problem Description
	planer, 15", 4" Dust Port	Powermatic-logo	POWERMATIC 15HH	Single Phase, 230V, 60Hz, 15A	$4,000	Operating Instructions and Parts Manual (2017)	PPM	Up and Operational (01/08/22)
	lathe, 18" extension, swing away tail stock, ONEWAY bowl chuck	Powermatic-logo	POWERMATIC 3520B	Single Phase, 220V, 60Hz	$7,000	yes, POWERMATIC whitepaper	PPM (donated by Jim Kueck)	Up and Operational (03/27/22)
	14" bandsaw, rip and cross-cut fences, 5" riser	Powermatic-logo	POWERMATIC PWBS‑14	Single Phase, 115V, 60Hz, 11A	$900	yes	PPM (donated by Jim Kueck)	Up and Operational (02/28/22)
Table saw with outfeed table	table saw, 2 hp, 48" Beisemeyer fence	Powermatic-logo	POWERMATIC PM66	3-phase	$1,500	no	PPM (donated by Jim Kueck)	Down, Red tagged(04/08/22)
Picture	Item	Manufacturer	Model Number	Power Requirements	Estimated Value	Manual	Owner	Status	Problem Description

Sharpening and Sanding Equipment List

Picture	Item	Manufacturer	Model Number	Estimated Value	Manual	Owner	Status	Problem Description
	8" bench grinder on pedestal, blue and white grinding stones, Wolverine and Veritas sharpening devices, buffing wheel and compounds	JET	JWBG‑8	$500		PPM (donated by David Wasmer, Sr.)	Up and Operational
	3M glue gun, Hot Melt, 250 Watts	3M logo 3M logo	Scotch-Weld™ Applicator AE II	$100		PPM (donated by David Wasmer, Sr.)	Up and Operational
	3M sanding belts, disks and sheets	3M logo 3M logo		$100		PPM (donated by David Wasmer, Sr.)
	variable speed buffer and buffing wheels	Logo DeWalt	DeWALT DWP849	$200		PPM (donated by David Wasmer, Sr.)	Up and Operational
	precision ground granite block, 2"x18"x3"			$200		PPM (donated by David Wasmer, Sr.)	Up and Operational
Picture	Item	Manufacturer	Model Number	Estimated Value	Manual	Owner	Status	Problem Description

Do not store tools, or anything, on our granite block to avoid damage to its surface.

Wood Shop Equipment List

Picture	Item	Manufacturer	Model Number	Power Requirements	Estimated Value	Manual	Owner	Status	Problem Description
	AIR FILTRATION SYSTEM with remote	BAILEIGH	AFS-2400	single phase, 110 Volts, 14 Amps, 60HZ	($1,853 new)	OPERATOR'S MANUAL	PPM (donated by TITAN ROBOTICS)	Installed 04/07/22
JET Jointer	8" Jointer with Shelix cutting head installed	JET	JJ-8CS		$1,000		PPM	Up and Operational (02/28/22)
	12-1/2" Thickness Planer	Logo DeWalt	DeWALT DW734		$400		Barry	Working
	Oscillating Edge Belt / Spindle Sander	RIDGID	EB4424 0		$250	Manual	On loan from Wentworth Aggregates LLC	Working (12/28/21)
	12" Sliding Compound Miter Saw with dust hood	Logo DeWalt	DeWALT DW708		$350		Les	Working (12/29/21)
	wood tool sharpener	WORK SHARP	WS3000		$200		John Norton
	Router and Shaper with bits on rolling carts	DELTA	?		?		PPM	Working (02/23/22)
	6" Disk 4" Belt Sander	WEN	6502T		$120		PPM
	1" x 30" belt & 5" disk sander	Dremel	?		$75		PPM
	Free standing 6"x84" Horizontal Belt Sander	JET	?		$800		PPM
	Free standing dust collector & vacuum	Dust Deputy & Craftsmen	?		$150		PPM
	Dust Collector 1.5HP 6" inlet	DELTA	?		$550		PPM
	Floor drill press	PORTER-CABLE	?		$500		PPM
	Mobile Base, Adjustable Universal	HTC	HTC2000	N/A	$80	yes, and online	PPM (donated by Jim Kueck)
Tablesaw dust collector	overarm tablesaw blade guard and dust collector	SOMMERVILLE DESIGN	EXCALIBUR	N/A	$150	no	PPM	?
	cross-cut slide	EXAKTOR	?	N/A	?	no	PPM	For Sale
Picture	Item	Manufacturer	Model Number	Power Requirements	Estimated Value	Manual	Owner	Status	Problem Description

AFS-2400
nameplate
3520B POWERMATIC lathe
Lathe chuck
Lathe tools
Bench grinder
POWERMATIC
bandsaw
POWERMATIC
bandsaw
POWERMATIC table saw

POWERMATIC
table saw
PM 66

PM 66
Powermatic 66 Inspection tag

Powermatic 66 Inspection tag
JET Jointer nameplate

JET Jointer
nameplate

FESTOOL Equipment List -- Level 3 Tools

Picture	Item	Manufacturer	Model Number	Estimated Value	Manual	Owner	Status	Problem Description
	Track Saw	Festool-logo.min	TS 55 EQ	$550		John Norton	Working
	Sander (Half Sheet)	Festool-logo.min	RS 2-E-Plus	$350		John Norton	Working
	Sander (Orbital)	Festool-logo.min	ETS 150/5 EQ-Plus	$350		John Norton	Working
	Dust Collector	Festool-logo.min	CLEANTEC CT 22 E	$600		John Norton	Working
	Multifunction Table	Festool-logo.min	1080	$760		John Norton	Working
Picture	Item	Manufacturer	Model Number	Estimated Value	Manual	Owner	Status	Problem Description

FESTOOL
Track Saw,
in Systainer
FESTOOL
Orbital Sander,
in Systainer
FESTOOL
Half Sheet Sander,
in Systainer

Power Tools

Picture	Item	Manufacturer	Model Number	Estimated Value	Manual	Owner	Status	Problem Description
	185mm Circular Saw	Makita logo	Makita 5007NB			PPM (donated by David Wasmer, Sr.)		discontinued product
	Router	Makita logo	Makita 3601B			PPM (donated by David Wasmer, Sr.)
	RECIPROCATING SAW	Logo DeWalt	DeWALT DW304P	$100		Greg C. (?)	?	discontinued product
	JIG SAW	Logo DeWalt	DeWALT DW331	$150		John Norton	?
	Jig Saw	BOSCH	1590EVS			PPM	?
AIR NAILER	AIR NAILER/ STAPLER	CENTRAL PNEUMATIC	64269	$30		PPM	New, (12/14/21)
	Biscuit Jointer	Craftsman		$130		PPM
	Circular Saw	Craftsman		$50		PPM
	Belt Sander (handheld)	Craftsman		$50		PPM
	Belt Sander (handheld)	Logo RYOBI	RYOBI			???
	Orbital Sander	PORTER-CABLE	Quicksand			PPM
	Orbital Sander	Logo RYOBI	RYOBI	$75		PPM
	Mouse Sander/ Polisher	File:Logo BLACK&DECKER.png	BLACK&DECKER FMS50	$25		PPM
Picture	Item	Manufacturer	Model Number	Estimated Value	Manual	Owner	Status	Problem Description

Clamps

Item	Manufacturer		Quantity	Price Each	Owner	Status	Problem Description
6" Wooden Handscrew Clamps	ROCKLER	Wooden Handscrew Clamps	2	$14	PPM
8" Quick Clamp	Irwin	Quick Grip	2	$10	PPM
12" Quick Clamp	Irwin	Quick Grip	2	$12	PPM
36" Quick Clamp	Irwin	Quick Grip	1	$36	Bill Epperson
30" Bessey Pipe Bar Clamp	Bessey		4	$20	Bill Epperson
48" Bessey Pipe Bar Clamp	Bessey		2	$20	Bill Epperson
60" Bessey Pipe Bar Clamp	Bessey		2	$20	Bill Epperson
36" Quick Release Steel Bar Clamp	Jorgensen	CABINENT MASTER 8036	5	$50	PPM
6" Quick Release Bar Clamp	PITTSBURGH		2	$3	Bill Epperson
12" Quick Release Bar Clamp	PITTSBURGH		0		PPM
18" Quick Release Bar Clamp	PITTSBURGH		0		PPM
24" Quick Release Bar Clamp	PITTSBURGH		2	$6	PPM
30" Quick Release Bar Clamp	PITTSBURGH		0		PPM
36" Quick Release Bar Clamp	PITTSBURGH	ITEM 60539	6	$9	PPM (donated by David Wasmer, Sr.)
60" Quick Release Bar Clamp	PITTSBURGH	ITEM 60673	2	$18	PPM
50" CLAMP & CUT EDGE GUIDE	PITTSBURGH	ITEM 66581	1	$20	PPM
6" Ratcheting Bar Clamp	PITTSBURGH		0		PPM
12" Ratcheting Bar Clamp	PITTSBURGH		6	$4	PPM
24" Ratcheting Bar Clamp	PITTSBURGH		0		PPM
Item	Manufacturer		Quantity	Price Each	Owner	Status	Problem Description

Hand Tools

Picture	Item	Manufacturer	Model Number	Estimated Value	Manual	Owner	Status	Problem Description
CRAFTSMAN Laser Level	4-in-1 LEVEL with Laser Trac (2?)	CRAFTSMAN	320.48247	?	yes	PPM	?
METAL DETECTOR	HAND HELD METAL DETECTOR	EASYVIEW TECHNOLOGY	GC-101H	$20	no	PPM	Working
	Forstner bit set (16 bits)			?	no	PPM (donated by Uncle Mike Mike)	Working
Coping saws and blades	coping saws and spare blades			?	no	PPM	Working
Picture	Item	Manufacturer	Model Number	Estimated Value	Manual	Owner	Status	Problem Description

Wood Shop Area hand tools should be marked with green tape or paint.

Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Donations Received

Wish List

Policies

Equipment Reservations

Materials

Donate for "Sheet Goods" via PayPal: bit.ly/ppmstuff

Or, leave donations in a black payment box, or use a QR code.

Help Us Keep Stocked Up!

PPM members enjoy discounts at the following local merchants:

(bring proof of PPM membership)


Website	Benefit	Address
Woodcraft of Colorado Springs	10% discount	4438 Austin Bluffs Parkway
CO Lumber Specialties	10% discount	3636 Stone Avenue
GENERAL AIR	10% discount	3031 N Nevada Ave.
ACE Hardware Uintah Gardens	10% discount	1830 W Uintah Street

Scrap and Trash

Trash day is TUESDAY (Extra pickups can be called from Waste Connections for around $75)

Recycling day is MONDAY (96 gallon tote should be placed out back by the dumpster)

Single Stream Recycling provided by Waste Connections. Paper, cardboard, cans, glass, and one time use plastics.

Empty interior trash cans into our dumpster at the back (south side) of the building.

Always leave the space better than you found it.

Member Showcase

Photo Gallery

Wooden boxes by Jack Keenan

Wooden boxes
(by Jack Keenan)
Miniature wooden wheelbarrow

Miniature wooden wheelbarrow
(by Mike Kentta)
Squirrel feeding

Squirrel feeding
Squirrel Feeder (by Mike Kentta)

Squirrel Feeder
(by Mike Kentta)
Tea Candle Holders

Tea Candle Holders
(by Mike Kentta)

Template:Showcase blurb

PPM YouTube Channel

"featured" videos, (the YouTube "HOME" tab)

"Things we've built", Created playlists, including 3D-printed robotic hand (2015)

Curated Links

Other Fun Stuff

Stumpy Nubs Woodworking Journal - YouTube

Inkscape Tutorial, For Engineers And Shaper Origin Users

BodgedButWorks -- YouTube channel

Vintage Machinery Photo Index -- POWERMATIC

Search the PPM Wiki — include Content pages as well as Multimedia.

Contact Us if you cannot find your answer here on our Wiki or if you notice any outdated information.

@@ Line 24: / Line 24: @@
 ===Training===
 <gallery>
-File:PPM Band Saw Safety and Operation.pdf|alt=PPM Band Saw Safety and Operation|<center>'''PPM Band Saw<br>Safety and Operation<br>(POWERMATIC)'''</center>
+File:PPM Band Saw Safety and Operation.pdf|alt=PPM Band Saw Safety and Operation|<center>PPM Band Saw<br>Safety and Operation<br>(POWERMATIC)</center>
-File:PPM Jointer safety and operation.pdf|alt=PPM Jointer Safety and Operation|<center>'''PPM Jointer<br>Safety and Operation<br>(JET)'''</center>
+File:PPM Jointer safety and operation.pdf|alt=PPM Jointer Safety and Operation|<center>PPM Jointer<br>Safety and Operation<br>(JET)</center>
-File:PPM router safety and operation - fixed.pdf|alt=PPM Router Safety and Operation|<center>'''PPM Router<br>Safety and Operation'''</center>
+File:PPM router safety and operation - fixed.pdf|alt=PPM Router Safety and Operation|<center>PPM Router<br>Safety and Operation</center>
-File:PPM Table Saw safety and operation.pdf|alt=PPM Table Saw Safety and Operation|<center>'''PPM Table Saw<br>Safety and Operation<br>(POWERMATIC)'''</center>
+File:PPM Table Saw safety and operation.pdf|alt=PPM Table Saw Safety and Operation|<center>PPM Table Saw<br>Safety and Operation<br>(POWERMATIC)</center>
 </gallery>
@@ Line 33: / Line 33: @@
 ===Tips===
 :Leave the space better than you found it.
-: Let the tool do the work. Don't force it.
+:Let the tool do the work. Don't force it.
 ===For Additional Help===
 :Use the PPM Slack channel #wood-shop
@@ Line 203: / Line 203: @@
 :'''Do not store tools, or anything, on our granite block to avoid damage to its surface.'''
-===Wood Shop Equipment List===
+=== Wood Shop Equipment List===
 {| class="wikitable sortable"
 |- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#42B649; color:#ffffff;"
@@ Line 210: / Line 210: @@
 |'''Manufacturer'''
 |'''Model<br>Number'''
-| Power Requirements
+|Power Requirements
 |'''Estimated<br>Value'''
 |'''Manual'''
@@ Line 278: / Line 278: @@
 '''Miter Saw with&nbsp;dust&nbsp;hood'''
 |[[File:Logo DeWALT.png|alt=Logo DeWalt|left|frameless|50x50px]]
-| DeWALT DW708
+|DeWALT DW708
 |
 |<p style="text-align:right;">$350</p>
@@ Line 343: / Line 343: @@
 |
 |'''Free standing dust collector & vacuum'''
-|Dust Deputy & [https://www.sears.com/tools-craftsman-tools/b-1324478419?sortOption=UNITS_HIGH_TO_LOW Craftsmen]
+| Dust Deputy & [https://www.sears.com/tools-craftsman-tools/b-1324478419?sortOption=UNITS_HIGH_TO_LOW Craftsmen]
 |?
 |
@@ Line 388: / Line 388: @@
 |[[File:Tablesaw dust collector.jpg|alt=Tablesaw dust collector|center|frameless|150x150px]]
 |'''overarm tablesaw blade guard and dust collector'''
-|SOMMERVILLE DESIGN
+| SOMMERVILLE DESIGN
 |EXCALIBUR
 |N/A
@@ Line 451: / Line 451: @@
 [[File:Level 3 badge.png|left|frameless|55x55px]]
 |[[File:Festool-logo.min.png|alt=Festool-logo.min|left|frameless|91x91px]]
-| TS 55 EQ
+|TS 55 EQ
 |<p style="text-align:right;">$550</p>
 |
@@ Line 518: / Line 518: @@
 </gallery>
-=== Power Tools===
+===Power Tools===
 {| class="wikitable sortable"
 |- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#42B649; color:#ffffff;"
@@ Line 705: / Line 705: @@
 |'''8" Quick Clamp'''
 |[https://www.irwin.com/tools/trades/woodworker Irwin]
-| Quick Grip
+|Quick Grip
 |<p style="text-align:center;">2</p>
 |<p style="text-align:right;">$10</p>
@@ Line 714: / Line 714: @@
 |'''12" Quick Clamp'''
 |[https://www.irwin.com/tools/trades/woodworker Irwin]
-| Quick Grip
+|Quick Grip
 |<p style="text-align:center;">2</p>
 |<p style="text-align:right;">$12</p>
@@ Line 723: / Line 723: @@
 |'''36" Quick Clamp'''
 |[https://www.irwin.com/tools/trades/woodworker Irwin]
-| Quick Grip
+|Quick Grip
 |<p style="text-align:center;">1</p>
 |<p style="text-align:right;">$36</p>
@@ Line 891: / Line 891: @@
 |[[File:CRAFTSMAN Laser Level.jpg|alt=CRAFTSMAN Laser Level|center|frameless|133x133px]]
 |'''4-in-1 LEVEL<br>with Laser Trac<br>(2?)'''
-|CRAFTSMAN
+| CRAFTSMAN
 |320.48247
 |<p style="text-align:right;">?</p>
@@ Line 902: / Line 902: @@
 |'''HAND HELD'''
 '''METAL DETECTOR'''
-|EASYVIEW TECHNOLOGY
+| EASYVIEW TECHNOLOGY
 |[https://www.securinadetection.com/product/Security-Portable-Handheld-Metal-Detector-GC-101H.html GC-101H]
 |<p style="text-align:right;">$20</p>
@@ Line 918: / Line 918: @@
 |no
 |PPM [[Donations Received#2022 Donations|(donated by Uncle Mike Mike)]]
-|Working
+| Working
 |
 |-
@@ Line 949: / Line 949: @@
 ===[[Wish List#Wood Shop|Wish List]]===
-==Policies==
+== Policies==
 ===[https://pikespeakmakerspace.org/reserve-equipment Equipment Reservations]===
@@ Line 969: / Line 969: @@
 ==Member Showcase==
-=== Photo Gallery===
+===Photo Gallery===
 <gallery>
 File:Wooden boxes by Jack Keenan.jpg|alt=Wooden boxes by Jack Keenan|<center>Wooden boxes<br>(by Jack Keenan)</center>
@@ Line 985: / Line 985: @@
-==Curated Links==
+==Curated Links ==
 <br>
 ==Other Fun Stuff==