Difference between revisions of "Wood Shop"
Line 140: | Line 140: | ||
|- | |- | ||
|[[File:Grinder station.jpg|alt=Grinder station|center|frameless|150x150px]] | |[[File:Grinder station.jpg|alt=Grinder station|center|frameless|150x150px]] | ||
− | |'''8" bench grinder on pedestal, blue and white grinding stones, Wolverine and Veritas sharpening devices, buffing wheel and compounds''' | + | |'''8" bench grinder on pedestal, blue and white grinding stones, Wolverine and Veritas sharpening devices, buffing wheel and compounds''' |
|[https://jettools.com/woodworking/ JET] | |[https://jettools.com/woodworking/ JET] | ||
|[https://jettools.com/726101 JWBG‑8 ] | |[https://jettools.com/726101 JWBG‑8 ] | ||
Line 149: | Line 149: | ||
| | | | ||
|- | |- | ||
+ | |[[File:3M hot melt glue gun.jpg|center|frameless|133x133px]] | ||
+ | |'''3M''' | ||
+ | '''glue gun, Hot Melt, 250 Watts''' | ||
+ | |[[File:3M logo.gif|alt=3M logo|left|frameless|33x33px|3M logo]] | ||
+ | |[https://multimedia.3m.com/mws/media/277207O/scotch-weldtm-applicator-ae-ii.pdf Scotch-Weld™ Applicator AE II] | ||
+ | |<p style="text-align:right;">$100</p> | ||
+ | | | ||
+ | |PPM<br>[https://wiki.pikespeakmakerspace.org/index.php/Donations_Received#2021_Donations (donated by David Wasmer, Sr.)] | ||
+ | |Up and Operational | ||
| | | | ||
− | | | + | |- |
| | | | ||
+ | |'''3M''' | ||
+ | '''sanding belts, disks and sheets''' | ||
+ | |[[File:3M logo.gif|alt=3M logo|left|frameless|33x33px|3M logo]] | ||
| | | | ||
− | |<p style="text-align:right;">$ | + | |<p style="text-align:right;">$100</p> |
| | | | ||
|PPM<br>[https://wiki.pikespeakmakerspace.org/index.php/Donations_Received#2021_Donations (donated by David Wasmer, Sr.)] | |PPM<br>[https://wiki.pikespeakmakerspace.org/index.php/Donations_Received#2021_Donations (donated by David Wasmer, Sr.)] | ||
− | | | + | | |
| | | | ||
|- | |- | ||
Line 170: | Line 182: | ||
|- | |- | ||
| | | | ||
− | |''' | + | |'''precision ground granite block, 2"x18"x3"''' |
− | |||
− | |||
| | | | ||
− | |||
| | | | ||
− | + | |<p style="text-align:right;">$200</p> | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |<p style="text-align:right;">$ | ||
| | | | ||
|PPM<br>[https://wiki.pikespeakmakerspace.org/index.php/Donations_Received#2021_Donations (donated by David Wasmer, Sr.)] | |PPM<br>[https://wiki.pikespeakmakerspace.org/index.php/Donations_Received#2021_Donations (donated by David Wasmer, Sr.)] | ||
Line 211: | Line 211: | ||
|'''Manufacturer''' | |'''Manufacturer''' | ||
|'''Model<br>Number''' | |'''Model<br>Number''' | ||
− | |Power Requirements | + | | Power Requirements |
|'''Estimated<br>Value''' | |'''Estimated<br>Value''' | ||
|'''Manual''' | |'''Manual''' | ||
Line 279: | Line 279: | ||
'''Miter Saw with dust hood''' | '''Miter Saw with dust hood''' | ||
|[[File:Logo DeWALT.png|alt=Logo DeWalt|left|frameless|50x50px]] | |[[File:Logo DeWALT.png|alt=Logo DeWalt|left|frameless|50x50px]] | ||
− | |DeWAL DW708 | + | | DeWAL DW708 |
| | | | ||
|<p style="text-align:right;">$350</p> | |<p style="text-align:right;">$350</p> | ||
Line 453: | Line 453: | ||
[[File:Level 3 badge.png|left|frameless|55x55px]] | [[File:Level 3 badge.png|left|frameless|55x55px]] | ||
|[[File:Festool-logo.min.png|alt=Festool-logo.min|left|frameless|91x91px]] | |[[File:Festool-logo.min.png|alt=Festool-logo.min|left|frameless|91x91px]] | ||
− | |TS 55 EQ | + | | TS 55 EQ |
|<p style="text-align:right;">$550</p> | |<p style="text-align:right;">$550</p> | ||
| | | | ||
Line 520: | Line 520: | ||
</gallery> | </gallery> | ||
− | ===Power Tools=== | + | === Power Tools=== |
{| class="wikitable sortable" | {| class="wikitable sortable" | ||
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#42B649; color:#ffffff;" | |- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#42B649; color:#ffffff;" | ||
Line 707: | Line 707: | ||
|'''8" Quick Clamp''' | |'''8" Quick Clamp''' | ||
|[https://www.irwin.com/tools/trades/woodworker Irwin] | |[https://www.irwin.com/tools/trades/woodworker Irwin] | ||
− | |Quick Grip | + | | Quick Grip |
|<p style="text-align:center;">2</p> | |<p style="text-align:center;">2</p> | ||
|<p style="text-align:right;">$10</p> | |<p style="text-align:right;">$10</p> | ||
Line 716: | Line 716: | ||
|'''12" Quick Clamp''' | |'''12" Quick Clamp''' | ||
|[https://www.irwin.com/tools/trades/woodworker Irwin] | |[https://www.irwin.com/tools/trades/woodworker Irwin] | ||
− | |Quick Grip | + | | Quick Grip |
|<p style="text-align:center;">2</p> | |<p style="text-align:center;">2</p> | ||
|<p style="text-align:right;">$12</p> | |<p style="text-align:right;">$12</p> | ||
Line 725: | Line 725: | ||
|'''36" Quick Clamp''' | |'''36" Quick Clamp''' | ||
|[https://www.irwin.com/tools/trades/woodworker Irwin] | |[https://www.irwin.com/tools/trades/woodworker Irwin] | ||
− | |Quick Grip | + | | Quick Grip |
|<p style="text-align:center;">1</p> | |<p style="text-align:center;">1</p> | ||
|<p style="text-align:right;">$36</p> | |<p style="text-align:right;">$36</p> | ||
Line 971: | Line 971: | ||
==Member Showcase== | ==Member Showcase== | ||
− | ===Photo Gallery=== | + | === Photo Gallery=== |
<gallery> | <gallery> | ||
File:Wooden boxes by Jack Keenan.jpg|alt=Wooden boxes by Jack Keenan|<center>'''Wooden boxes<br>(by Jack Keenan)'''</center> | File:Wooden boxes by Jack Keenan.jpg|alt=Wooden boxes by Jack Keenan|<center>'''Wooden boxes<br>(by Jack Keenan)'''</center> | ||
Line 986: | Line 986: | ||
− | ==Other Fun Stuff== | + | == Other Fun Stuff== |
:[https://www.youtube.com/user/StumpyNubsWorkshop/videos '''Stumpy Nubs Woodworking Journal - YouTube'''] | :[https://www.youtube.com/user/StumpyNubsWorkshop/videos '''Stumpy Nubs Woodworking Journal - YouTube'''] | ||
Revision as of 19:37, 7 April 2022
The Wood Shop Area at Pikes Peak Makerspace (PPM) consists of
both Level 2 and Level 3 equipment.
Additional training is required to use our Level 3 equipment.
Wood Shop Area hand tools should be marked with green tape or paint or powdercoating.
Safety First
Members must know the following information:
- In case of emergency, call 911.
- Our physical location is:
- 735 East Pikes Peak Avenue
- Colorado Springs, CO 80903
- use this when ordering pizza or an ambulance
PPM Fire Escape Plan
- Fire Escape Plan maps are posted throughout the Makerspace.
- There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.
First Aid
- There is a FIRST AID Supply Cabinet in our Kitchen Area.
- FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.
Eye Wash Stations
- Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.
Personal Protective Equipment (PPE)
- Wear protective equipment in all Wood and Metal Shop Areas.
- Wear gloves when using Isopropyl Alcohol and other cleaners.
Hazardous Chemicals
- All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.
- Review the Safety Data Sheet (SDS) information of unknown products before use.
- SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.
- Do not bring dangerous chemicals to the makerspace.
- Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.
- Please DO NOT paint indoors.
Impairment
- The use of PPM equipment requires you to be alert, attentive and focused.
- Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.
- Likewise, ensure that you are well-rested and alert.
Classes and Training
Area Leaders
- Mike Kentta, Rodney Roy, Henry Doheny
- View all PPM Area Captains
Area Captain Duties
- To help out in the Wood Shop Area, contact any of the Area Leaders on Slack.
Classes
- Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup
Training
Tips
- Leave the space better than you found it.
- Let the tool do the work. Don't force it.
For Additional Help
- Use the PPM Slack channel #wood-shop
The following pages contain historical information. The pages are provided for reference only.
• Introduction to Woodworking (14:45, 15 November 2015)
• Table saw (08:08, 25 November 2015)
Equipment Lists
POWERMATIC Equipment List
Picture | Item | Manufacturer | Model Number |
Power Requirements |
Estimated Value |
Manual | Owner | Status | Problem Description |
planer, 15", 4" Dust Port |
POWERMATIC 15HH | Single Phase, 230V, 60Hz, 15A | $4,000 |
Operating Instructions and Parts Manual
(2017) |
PPM | Up and Operational
(01/08/22) |
|||
lathe, 18" extension, swing away tail stock, ONEWAY bowl chuck |
POWERMATIC 3520B | Single Phase, 220V, 60Hz | $7,000 |
yes, POWERMATIC whitepaper | PPM (donated by Jim Kueck) |
Up and Operational (03/27/22) | |||
14" bandsaw, rip and cross-cut fences, 5" riser |
POWERMATIC PWBS‑14 | Single Phase, 115V, 60Hz, 11A | $900 |
yes | PPM (donated by Jim Kueck) |
Up and Operational
(02/28/22) |
|||
table saw, 2 hp, 48" Beisemeyer fence |
POWERMATIC PM66 | 3-phase | $1,500 |
no | PPM (donated by Jim Kueck) |
Up and Operational
(03/28/22) |
|||
Picture | Item | Manufacturer | Model Number |
Power Requirements |
Estimated Value |
Manual | Owner | Status | Problem Description |
Sharpening and Sanding Equipment List
Picture | Item | Manufacturer | Model Number |
Estimated Value |
Manual | Owner | Status | Problem Description |
8" bench grinder on pedestal, blue and white grinding stones, Wolverine and Veritas sharpening devices, buffing wheel and compounds | JET | JWBG‑8 | $500 |
PPM (donated by David Wasmer, Sr.) |
Up and Operational | |||
3M
glue gun, Hot Melt, 250 Watts |
Scotch-Weld™ Applicator AE II | $100 |
PPM (donated by David Wasmer, Sr.) |
Up and Operational | ||||
3M
sanding belts, disks and sheets |
$100 |
PPM (donated by David Wasmer, Sr.) |
||||||
variable speed buffer and buffing wheels | DeWALT DWP849 | $200 |
PPM (donated by David Wasmer, Sr.) |
Up and Operational | ||||
precision ground granite block, 2"x18"x3" | $200 |
PPM (donated by David Wasmer, Sr.) |
Up and Operational | |||||
Picture | Item | Manufacturer | Model Number |
Estimated Value |
Manual | Owner | Status | Problem Description |
- Do not store tools, or anything, on our granite block to avoid damage to its surface.
Wood Shop Equipment List
Picture | Item | Manufacturer | Model Number |
Power Requirements | Estimated Value |
Manual | Owner | Status | Problem Description |
AIR FILTRATION SYSTEM
with remote |
AFS-2400 | single phase,
110 Volts, 14 Amps, 60HZ |
($1,853 new) | OPERATOR'S MANUAL | PPM (donated by TITAN ROBOTICS) | Installed
04/07/22 |
|||
8" Jointer with Shelix cutting head installed | JET | JJ-8CS | $1,000 |
PPM | Up and Operational
(02/28/22) |
||||
12-1/2" Thickness Planer | DeWALT DW734 | $400 |
Barry | Working | |||||
Oscillating
Edge Belt / Spindle Sander |
RIDGID | EB4424 0 | $250 |
Manual | On loan from
Wentworth Aggregates LLC |
Working
(12/28/21) |
|||
12" Sliding Compound
Miter Saw with dust hood |
DeWAL DW708 | $350 |
Les | Working (12/29/21) | |||||
wood tool sharpener | WORK SHARP | WS3000 | $200 |
John Norton | |||||
Router and Shaper with bits on rolling carts | DELTA | ? | ? |
PPM | Working (02/23/22) | ||||
6" Disk 4" Belt Sander | WEN | 6502T | $120 |
PPM | |||||
1" x 30" belt & 5" disk sander | Dremel | ? | $75 |
PPM | |||||
Free standing 6"x84" Horizontal Belt Sander | JET | ? | $800 |
PPM | |||||
Free standing dust collector & vacuum | Dust Deputy & Craftsmen | ? | $150 |
PPM | |||||
Dust Collector 1.5HP 6" inlet | DELTA | ? | $550 |
PPM | |||||
Floor drill press | PORTER-CABLE | ? | $500 |
PPM | |||||
Mobile Base, Adjustable Universal | HTC | HTC2000 | N/A | $80 |
yes, and | PPM (donated by Jim Kueck) |
|||
overarm tablesaw blade guard and dust collector | SOMMERVILLE DESIGN | EXCALIBUR | N/A | $150 |
PPM | ? | |||
cross-cut slide | EXAKTOR | no | PPM | For Sale | |||||
Picture | Item | Manufacturer | Model Number |
Power Requirements | Estimated Value |
Manual | Owner | Status | Problem Description |
- Powermatic 66 Inspection tag.jpg
Powermatic 66 Inspection tag
FESTOOL Equipment List -- Level 3 Tools
Picture | Item | Manufacturer | Model Number |
Estimated Value |
Manual | Owner | Status | Problem Description |
Track Saw |
TS 55 EQ | $550 |
John Norton | Working | ||||
Sander (Half Sheet) |
RS 2-E-Plus | $350 |
John Norton | Working | ||||
Sander (Orbital) |
ETS 150/5 EQ-Plus | $350 |
John Norton | Working | ||||
Dust Collector |
CLEANTEC CT 22 E | $600 |
John Norton | Working | ||||
Multifunction Table |
1080 | $760 |
John Norton | Working | ||||
Picture | Item | Manufacturer | Model Number |
Estimated Value |
Manual | Owner | Status | Problem Description |
Power Tools
Picture | Item | Manufacturer | Model Number |
Estimated Value |
Manual | Owner | Status | Problem Description |
185mm
Circular Saw |
Makita | PPM (donated by David Wasmer, Sr.) |
discontinued product | |||||
Router | Makita | PPM (donated by David Wasmer, Sr.) |
||||||
RECIPROCATING SAW | DeWALT
DW304P |
$100 |
Greg C. (?) | ? | discontinued product | |||
JIG SAW | DeWALT
DW331 |
$150 |
John Norton | ? | ||||
Jig Saw | BOSCH | 1590EVS | PPM | ? | ||||
AIR NAILER/
STAPLER |
CENTRAL PNEUMATIC | 64269 | $30 |
PPM | New, (12/14/21) | |||
Biscuit
Jointer |
Craftsman | $130 |
PPM | |||||
Circular
Saw |
Craftsman | $50 |
PPM | |||||
Belt Sander (handheld) | Craftsman | $50 |
PPM | |||||
Belt Sander (handheld) | RYOBI | ??? | ||||||
Orbital Sander | PORTER-CABLE | Quicksand | PPM | |||||
Orbital Sander | RYOBI | $75 |
PPM | |||||
Mouse Sander/ Polisher |
BLACK&DECKER FMS50 | $25 |
PPM | |||||
Picture | Item | Manufacturer | Model Number |
Estimated Value |
Manual | Owner | Status | Problem Description |
Clamps
Item | Manufacturer | Quantity | Price Each |
Owner | Status | Problem Description | |
6" Wooden Handscrew Clamps | ROCKLER | Wooden Handscrew Clamps | 2 |
$14 |
PPM | ||
8" Quick Clamp | Irwin | Quick Grip | 2 |
$10 |
PPM | ||
12" Quick Clamp | Irwin | Quick Grip | 2 |
$12 |
PPM | ||
36" Quick Clamp | Irwin | Quick Grip | 1 |
$36 |
Bill Epperson | ||
30" Bessey Pipe Bar Clamp | Bessey | 4 |
$20 |
Bill Epperson | |||
48" Bessey Pipe Bar Clamp | Bessey | 2 |
$20 |
Bill Epperson | |||
60" Bessey Pipe Bar Clamp | Bessey | 2 |
$20 |
Bill Epperson | |||
36" Quick Release Steel Bar Clamp | Jorgensen | CABINENT MASTER 8036 | 5 |
$50 |
PPM | ||
6" Quick Release Bar Clamp | PITTSBURGH | 2 |
$3 |
Bill Epperson | |||
12" Quick Release Bar Clamp | PITTSBURGH | 0 |
PPM | ||||
18" Quick Release Bar Clamp | PITTSBURGH | 0 |
PPM | ||||
24" Quick Release Bar Clamp | PITTSBURGH | 2 |
$6 |
PPM | |||
30" Quick Release Bar Clamp | PITTSBURGH | 0 |
PPM | ||||
36" Quick Release Bar Clamp | PITTSBURGH | ITEM 60539 | 6 |
$9 |
PPM (donated by David Wasmer, Sr.) |
||
60" Quick Release Bar Clamp | PITTSBURGH | ITEM 60673 | 2 |
$18 |
PPM | ||
50" CLAMP & CUT EDGE GUIDE | PITTSBURGH | ITEM 66581 | 1 |
$20 |
PPM | ||
6" Ratcheting Bar Clamp | PITTSBURGH | 0 |
PPM | ||||
12" Ratcheting Bar Clamp | PITTSBURGH | 6 |
$4 |
PPM | |||
24" Ratcheting Bar Clamp | PITTSBURGH | 0 |
PPM | ||||
Item | Manufacturer | Quantity | Price Each |
Owner | Status | Problem Description |
Hand Tools
Picture | Item | Manufacturer | Model Number |
Estimated Value |
Manual | Owner | Status | Problem Description |
4-in-1 LEVEL with Laser Trac (2?) |
CRAFTSMAN | 320.48247 | ? |
yes | PPM | ? | ||
HAND HELD
METAL DETECTOR |
EASYVIEW TECHNOLOGY | GC-101H | $20 |
no | PPM | Working | ||
Forstner bit set
(16 bits) |
? |
no | PPM (donated by Uncle Mike Mike) | Working | ||||
coping saws and spare blades |
? |
no | PPM | Working | ||||
Picture | Item | Manufacturer | Model Number |
Estimated Value |
Manual | Owner | Status | Problem Description |
- Wood Shop Area hand tools should be marked with green tape or paint.
- Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.
Donations Received
Wish List
Policies
Equipment Reservations
Materials
- Donate for "Sheet Goods" via PayPal: bit.ly/ppmstuff
- Or, leave donations in a black payment box, or use a QR code.
- Help Us Keep Stocked Up!
- PPM members enjoy discounts at the following local merchants:
- (bring proof of membership)
Company | Website | Benefit | Directions to |
Woodcraft of Colorado Springs | 10% discount | 4438 Austin Bluffs Parkway | |
CO Lumber Specialties | 10% discount | 3636 Stone Avenue | |
GENERAL AIR | 10% discount | 3031 N Nevada Ave. | |
ACE Hardware Uintah Gardens | 10% discount | 1830 W Uintah Street | |
- Map of stores that provide PPM member discounts
- Map of helpful local resources curated by our makers
- At home LightBurn subscriptions can be purchased at a discounted rate for being a PPM member.
- The discount code is saved as a Pinned Message in our 'laser-cutter' channel in Slack.
Scrap and Trash
- Trash day is MONDAY
- Recycling day is MONDAY (96 gallon tote)
- Single Stream Recycling provided by Waste Connections. Paper, cardboard, cans, glass, and one time use plastics.
- Empty recycling and trash into our dumpster at the back (south side) of the building.
- Always leave the space better than you found it.
Software
Fusion 360
Inkscape
VCarve
Member Showcase
Photo Gallery
- For even more member projects, visit our #showcase channel on Slack, or follow our social media links.
PPM YouTube Channel
- "featured" videos, (the YouTube "HOME" tab)
- "Things we've built", Created playlists, including 3D-printed robotic hand (2015)
Other Fun Stuff
- BodgedButWorks -- YouTube channel
PPM Tool Color Map — Interactive
Search the PPM Wiki — include Content pages as well as Multimedia.
Contact Us if you cannot find your answer here on our Wiki or if you notice any info that is outdated.