Difference between revisions of "Sandbox - 01"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
| − | |||
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|80x80px]] | [[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|80x80px]] | ||
'''The CNC Area at Pikes Peak Makerspace consists mostly of Level 3 equipment'''. | '''The CNC Area at Pikes Peak Makerspace consists mostly of Level 3 equipment'''. | ||
Revision as of 21:09, 10 January 2022
The CNC Area at Pikes Peak Makerspace consists mostly of Level 3 equipment.
Additional training is required to use our Level 3 equipment.
CNC Area hand tools should be marked with blue tape or paint.
Our CNC room is 234 square feet (13'x18'). It is a small but important part of our 5,500 square foot facility.
Safety First
Members must know the following information:
- In case of emergency, call 911.
- Our physical location is:
- 735 East Pikes Peak Avenue
- Colorado Springs, CO 80903
- use this when ordering pizza or an ambulance
IN CASE OF
EMERGENCY
sign
PPM Fire Escape Plan
- Fire Escape Plan maps are posted throughout the Makerspace.
- There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.
PPM Emergency
Evacuation Plan.pdf
PPM Fire
Prevention Plan.pdf
PPM Fire Escape
Plan
First Aid
- There is a FIRST AID Supply Cabinet in our Kitchen Area.
- FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.
FIRST AID
Supply Cabinet
FIRST AID
Kit
Eye Wash Stations
- Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.
Emergency
Eye & Face Wash
Station
Personal Protective Equipment (PPE)
- Wear protective equipment in all Wood and Metal Shop Areas.
- Wear gloves when using Isopropyl Alcohol and other cleaners.
Personal Protective Equipment (PPE)
Hazardous Chemicals
- All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.
- Review the Safety Data Sheet (SDS) information of unknown products before use.
- SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.
- Do not bring dangerous chemicals to the makerspace.
- Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.
- Please DO NOT paint indoors.
Flammables Cabinet
in the Vented Room
Impairment
- The use of PPM equipment requires you to be alert, attentive, and focused.
- Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.