Difference between revisions of "Vented Room"

From Pikes Peak Makerspace Wiki
Jump to navigation Jump to search
Line 23: Line 23:
  
 
'''Step-By-Step Process for Using the Vented Room'''
 
'''Step-By-Step Process for Using the Vented Room'''
* Use the Sign In Sheet
+
*'''Projects left over 36 hours will be subject to removal from the area'''
* Set fan and timer
+
 
 +
*Use the Sign In Sheet
 +
*Set fan and timer
 
*Sign in with QR code
 
*Sign in with QR code
*Setup paper
+
* Setup paper
 
*Wear PPE (Personal Protective Equipment)
 
*Wear PPE (Personal Protective Equipment)
 
*Put away all holding stands and materials after the final coat
 
*Put away all holding stands and materials after the final coat
*Absolutely no paint or finishing materials left out, ever
+
* Absolutely no paint or finishing materials left out, ever
 
*Remove workpiece as soon as dry
 
*Remove workpiece as soon as dry
*Items left more than 12 hours will be removed
 
 
<br>
 
<br>
 
'''Rules for the Vented Room'''
 
'''Rules for the Vented Room'''
*All hazardous chemicals, including spray paint, stains, and other approved items must be stored in the yellow hazardous chemical storage cabinet located in the Vented&nbsp;Room
+
cluding spray paint, stains, and other approved items must be stored in the yellow hazardous chemical storage cabinet located in the Vented&nbsp;Room
*Review the Safety Data Sheet (SDS) information of unknown products before&nbsp;use
+
*Review the Safety Data She
*SDS information is available via the QR code on the hazardous chemical storage&nbsp;cabinet
+
t (SDS) information of unknown products before&nbsp;use
*Do not bring dangerous chemicals to the makerspace
+
*SDS information is availab
*Must be continuously ventilated during occupied hours
+
e via the QR code on the hazardous chemical storage&nbsp;cabinet
*Take frequent fresh air breaks while painting
+
*Do not bring dangerous che
 +
icals to the makerspace
 +
*Must be continuously venti
 +
ated during occupied hours
 +
*Take frequent fresh air br
 +
aks while painting
 
*Leave painted areas if you experience eye watering, headaches, dizziness, or breathing&nbsp;problems
 
*Leave painted areas if you experience eye watering, headaches, dizziness, or breathing&nbsp;problems
*Turn on the timer and leave the door closed while in&nbsp;use
+
*Turn on the timer and leav
*When done, leave timer on to continue ventilating the room properly
+
the door closed while in&nbsp;use
*Use the correct PPE when you’re painting. Items such as a spray painting mask, and gloves are vital
+
*When done, leave timer on  
*Before you start to use your spray cans, make sure that you store them away from heat and fire. The aerosols are highly combustible, and will cause a lot of damage and potentially a lot of&nbsp;harm
+
o continue ventilating the room properly
*Clean your entire area after your job is complete; including, but not limited to, tables, walls, floors, cabinets, all materials put away
+
*Use the correct PPE when y
*Do not leave anything out long&nbsp;term
+
u’re painting. Items such as a spray painting mask, and gloves are vital
 +
*Before you start to use yo
 +
r spray cans, make sure that you store them away from heat and fire. The aerosols are highly combustible, and will cause a lot of damage and potentially a lot of&nbsp;harm
 +
*Clean your entire area aft
 +
r your job is complete; including, but not limited to, tables, walls, floors, cabinets, all materials put away
 +
*Do not leave anything out  
 +
ong&nbsp;term
 +
 
 +
==Equipment List==
 +
 
 +
===Ven
  
 
==Equipment List==
 
==Equipment List==
  
===Vented Room Equipment===
+
===Vented Room Equipment ===
 
{| class="wikitable"
 
{| class="wikitable"
 
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important;; background-color:#0F99D7; color:#ffffff;"
 
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important;; background-color:#0F99D7; color:#ffffff;"
Line 56: Line 72:
 
|Description
 
|Description
 
|Manufacturer
 
|Manufacturer
|Resources
+
| Resources
 
|-
 
|-
 
|<br>'''Exhaust fan'''<br><br>
 
|<br>'''Exhaust fan'''<br><br>
Line 64: Line 80:
 
|-
 
|-
 
|'''Flammable&nbsp;material<br>storage cabinet'''
 
|'''Flammable&nbsp;material<br>storage cabinet'''
| 43" wide
+
|43" wide
 
18" deep
 
18" deep
  
 
65" tall
 
65" tall
| A&A SHEET METAL PRODUCTS, INC.,  
+
|A&A SHEET METAL PRODUCTS, INC.,  
 
model number A245
 
model number A245
 
|
 
|
Line 99: Line 115:
 
adjustable height,<br>
 
adjustable height,<br>
 
on wheels
 
on wheels
|PPM  
+
| PPM  
 
(Mathew Palfenier)
 
(Mathew Palfenier)
 
|
 
|
 
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#ffffff;"
 
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#ffffff;"
|  
+
|
 
|
 
|
 
|
 
|
Line 131: Line 147:
 
:Review SDS information of unknown products before use. SDS available [https://docs.google.com/spreadsheets/d/1Tt_gtHYF7himKy2lNIdiUzButwbBVWlP/edit?usp=sharing&ouid=100083100224773113376&rtpof=true&sd=true here] and via QR code in hazardous chemical storage.
 
:Review SDS information of unknown products before use. SDS available [https://docs.google.com/spreadsheets/d/1Tt_gtHYF7himKy2lNIdiUzButwbBVWlP/edit?usp=sharing&ouid=100083100224773113376&rtpof=true&sd=true here] and via QR code in hazardous chemical storage.
 
:Do not bring dangerous chemicals to the space.
 
:Do not bring dangerous chemicals to the space.
: Spray paint, stains, and other approved items must be stored in the flammables cabinet in the Vented&nbsp;Room.
+
:Spray paint, stains, and other approved items must be stored in the flammables cabinet in the Vented&nbsp;Room.
 
:Do not paint indoors.
 
:Do not paint indoors.
  

Revision as of 19:57, 28 October 2024

Level 1 badge used at Pikes Peak Makerspace

Pikes Peak Makerspace (PPM) provides a vented, well-lit room for painting and staining, and so forth.

Our Vented Room is roughly 14 x 6.5 sq. ft. (730 cu. ft.)

It is for all our members to use without any additional required training (Level 1).

Reservations are required.

Vented Room Check-in and Reservation

Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.

 


Safety First

Members must know the following information:

In case of emergency, call 911.
Our physical location is:
735 East Pikes Peak Avenue
Colorado Springs, CO 80903
use this when ordering pizza or an ambulance

PPM Fire Escape Plan

Fire Escape Plan maps are posted throughout the Makerspace.
There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.

First Aid

There is a FIRST AID Supply Cabinet in our Kitchen Area.
FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.

Eye Wash Stations

Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.

Personal Protective Equipment (PPE)

Wear protective equipment in all Wood and Metal Shop Areas.
Wear gloves when using Isopropyl Alcohol and other cleaners.

Hazardous Chemicals

All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.
Review the Safety Data Sheet (SDS) information of unknown products before use.
SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.
Do not bring dangerous chemicals to the makerspace.
Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.
Please DO NOT paint indoors.



Impairment

The use of PPM equipment requires you to be alert, attentive, and focused.
Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.


 

Training

Step-By-Step Process for Using the Vented Room

  • Projects left over 36 hours will be subject to removal from the area
  • Use the Sign In Sheet
  • Set fan and timer
  • Sign in with QR code
  • Setup paper
  • Wear PPE (Personal Protective Equipment)
  • Put away all holding stands and materials after the final coat
  • Absolutely no paint or finishing materials left out, ever
  • Remove workpiece as soon as dry


Rules for the Vented Room cluding spray paint, stains, and other approved items must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room

  • Review the Safety Data She

t (SDS) information of unknown products before use

  • SDS information is availab

e via the QR code on the hazardous chemical storage cabinet

  • Do not bring dangerous che

icals to the makerspace

  • Must be continuously venti

ated during occupied hours

  • Take frequent fresh air br

aks while painting

  • Leave painted areas if you experience eye watering, headaches, dizziness, or breathing problems
  • Turn on the timer and leav
the door closed while in use
  • When done, leave timer on

o continue ventilating the room properly

  • Use the correct PPE when y

u’re painting. Items such as a spray painting mask, and gloves are vital

  • Before you start to use yo

r spray cans, make sure that you store them away from heat and fire. The aerosols are highly combustible, and will cause a lot of damage and potentially a lot of harm

  • Clean your entire area aft

r your job is complete; including, but not limited to, tables, walls, floors, cabinets, all materials put away

  • Do not leave anything out

ong term

Equipment List

===Ven

Equipment List

Vented Room Equipment

Item Description Manufacturer Resources

Exhaust fan

with 4-hour timer
Flammable material
storage cabinet
43" wide

18" deep

65" tall

A&A SHEET METAL PRODUCTS, INC.,

model number A245


storage cabinet

metal (grey)

storage cabinet

metal, with key (tan)
Table 1 68"x 34" table,

adjustable height,
on wheels

PPM

(Mathew Palfenier)

Table 2 73"x 34" table,

adjustable height,
on wheels

PPM

(Mathew Palfenier)

Equipment Reservations

  • Use of the Vented Room REQUIRES a reservation.
  • Must reserve the Vented Room at least 2 hours in advance.
  • DO NOT leave projects in the room more than 12 hours.
    • Any projects left more than 12 hours will be subject to removal.
  • If at all possible, limit your use of the vented room to ONE table.
  • Use this form to sign in (No more paper)

Hand Tools

Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Benefits

PPM members enjoy discounts at the following local merchants:
(bring proof of membership)
Company Website Benefit Directions to
Logo WOODCRAFT
Woodcraft of Colorado Springs 10% discount    4438 Austin Bluffs Parkway
Logo CO Lumber
CO Lumber Specialties 10% discount 3636 Stone Avenue
Logo General Air
GENERAL AIR 10% discount 3031 N Nevada Ave.
Logo ACE
ACE Hardware Uintah Gardens 10% discount 1830 W Uintah Street
Map of stores that provide PPM member discounts
Map of helpful local resources curated by our makers
At home LightBurn subscriptions can be purchased at a discounted rate for being a PPM member.
The discount code is saved as a Pinned Message in our 'laser-cutter' channel in Slack.

Policies

Materials

Safety Data Sheets

Review SDS information of unknown products before use. SDS available here and via QR code in hazardous chemical storage.
Do not bring dangerous chemicals to the space.
Spray paint, stains, and other approved items must be stored in the flammables cabinet in the Vented Room.
Do not paint indoors.

Red Tags

If equipment needs repairs, place a Red Tag on it and report it via the Pikes Peak Makerspace Slack channel #red-tags-issues
This advises others on the malfunctioning equipment and ensures that actions can be taken to service/repair the equipment.

Related Pages

Links to related PPM Wiki pages:

  Metal Shop  
  Wood Shop  
  Shed  
QR Codes

For Additional Help

Use the PPM Slack channel #general
List of all PPM Slack channels
Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the community.

Search the PPM Wiki — include Content pages as well as Multimedia.

Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.

Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative processes by providing shared space, shared tools, materials, software, and a knowledge base to turn their ideas into reality.