Rules and Policies

Rule and Policy Changes

These rules and policies are subject to change. Changes will become effective immediately upon successful vote of adoption by the Board of Directors or by the membership at a membership meeting. A summarized version of these rules will be posted in the space, with a link to the full rules.

Code of Conduct

1. All guests and members must follow the Code of Conduct.
2. Safety is important, if you are unsure of how to safely do something, don’t do it.
3. Directors and the President may ban anyone who violates the Code of Conduct from the premises or online systems. Bans may be reversed upon agreement by 2 or more members of the Board of Directors.
4. Don't merely respect each other; be excellent to each other.
   • We are all here to make things and learn. Collaboration is important.
   • When you break something, own up to it. If you have any doubt about fixing it, ask for help. Don't make someone feel bad for breaking things, help them understand what went wrong.<ref>You will not be asked to replace/repair equipment due to honest mistakes, we just want to know why something broke so we can prevent it in the future.</ref>
   • Clean, Maintain, Organize, Improve. Always leave the space better than you found it.<ref>This includes taking out the trash, wiping down tables, vacuuming/sweeping floors, returning tools to the proper place, etc.</ref>
   • Don't be afraid to ask questions. Answer them kindly; eventually you'll have to ask for help too.
   • Tools/resources must stay on the premises so that other members may use them.<ref>Removing tools/resources from the space without authorization from an Officer or member of the Board of Directors is theft.</ref>
5. Everyone must sign a liability waiver.
6. Sleeping is not cool, but naps are ok. We are not a hotel.<ref>A nap is a short period of sleep, typically taken during daylight hours as an adjunct to the usual nocturnal sleep period. Naps are most often taken as a response to drowsiness during waking hours. If you are "napping" at the space instead of sleeping at home, you are violating the rule. Please drive responsibly, if you are too tired to drive use Uber/Lyft or call a cab.</ref>
7. All members are expected to maintain a safe and clean environment at all times.
8. Smoking cigarettes/cigars, use of vaporizers (also known as electronic cigarettes) is not allowed inside the building.
9. No pets allowed in the building. Exception, dogs are allowed on a case by case basis.
10. Do not install illegal software. Members will be asked to leave on the first violation.
11. Don't catch fire, set others on fire, or set anything on fire which has not been designated or designed to be on fire.
12. It is the responsibility of each member to help enforce the Code of Conduct. If someone is violating the Code of Conduct politely explain to them why their behavior is not acceptable. Egregious violations should be reported to a Director or the President.

Guests

1. Guests can not inhabit the Pikes Peak Makerspace without another keyed Member present.
2. Members can not have guests for the first 30 days.
3. Guests are encouraged to become Members.
4. Guests are not allowed to use tools and equipment, except as part of a scheduled class/workshop.
5. Members are responsible for their Guests and their actions.

Minors

1. PPM is not a day care.
2. Minors 18 and under must be accompanied closely by Parent or Legal Guardian at all times and are not allowed to have keys to the space.
   1. Accompanied closely means visual range generally, and immediate reach when near dangerous tools.
3. Parents/Legal Guardians are responsible for their children and their actions.
4. Minors under the age of 18 must have their liability form signed by a Parent or Legal Guardian.

Formal Complaints

The formal complaint process exists for members to request a discussion be held by the Board of Directors regarding specific actions of another member. Members are expected to discuss their complaints in a calm and polite manner. Mediation is available to resolve issues without the need of a formal complaint.

1. Formal complaints against another member must be submitted, in writing, to the Board of Directors or to any member of the Board of Directors.<ref>Primary contact is via admin@pikespeakmakerspace.org</ref> The complaint must have two parts outlined at minimum, a "Complaint" part and a "Recommended Solution" part.
2. The Board of Directors will decide to either hold a special meeting regarding this matter, or will consider it at the next meeting in its cycle.
3. The Board of Directors is not required to act in accordance to the grievance or complainant's "Recommended Solution" part and may devise its own remediation.
4. Complaints will be added to the agenda of the meeting, posted on this wiki, without identifying information.
5. Minutes for the meeting will not be scrubbed of identifying information.
6. Any disciplinary action for which one or more of the Board of Directors or officers of the corporation (acting in their role as an officer) are involved require that a written record of the action, reason(s) for the action, and acknowledgement of the accused be sent to the Board of Directors for keeping.

Non-Discrimination Policy

Pikes Peak Makerspace does not promote or discriminate against any person, population group, or organization with regard to categories protected by applicable United States law. These include, but are not limited to race, color, religion, sex, gender expression, physical appearance, language, education background, national origin, age, disability, and veteran status.

Membership Dues

All dues are paid in advance and are recurring. Check and Credit Card is accepted only.

Plan Name	Rate	Notes
Monthly Membership	$55/mo	Our standard membership.
Student Membership	$30/mo	This rate is for members who are currently in school.
Yearly Membership	$600/year	This rate $50 per month vs. the normal rate of $55.
Family Membership Add-on	$20/mo	This rate applies to family members (living in the same household) of a member paying the $55/mo or $600/year plan.
Dedicated Desk/bench	$175/mo	This is for our super makers who want to have a private desk.

Voting Rights

1. We currently have no rules or policy here.

Storage

1. The Pikes Peak Makerspace is not a storage facility, projects and materials that do not follow these rules, will be considered donations.
2. Projects (and materials for them) can only be stored in designated Project Storage Areas. Personal Storage is also available to paid yearly members. You need to have your name on it.
3. Projects (and materials for them) stored in the Project Storage Areas must follow the rules and policies listed here.
4. A project may be stored elsewhere with the approval of a member of the Board or by a vote of the membership.
5. Firearms, gunpowder, primers, and assembled ammunition cannot be stored at the Makerspace.
6. All tools must be claimed by a committee. Committee's are ultimately responsible for the maintenance, upkeep and training of tools.

Storage in Committee Areas

1. Anything in a committee area is available for use by all members unless documented/labeled as training required.
2. Items that require training may be secured, but a path to obtain use of said tool should be documented.
3. If a person must be contacted to use a tool, 2 or more points of contact must be listed on/around tool.
4. Storage of materials is not be permitted in committee areas unless there is a defined/documented area.
5. For items to be considered on display and not storage, items have to be in a designated area.
6. Anything that is a personal item in a committee area must have gone through the Loaning of Tools & Equipment to the Makerspace
7. If training is required and not set up at least once a month, the personal item on loan is subject to removal within 30 days.

Events

1. Scheduling of events is done on a first-come basis, as determined by the calendar management system.
2. Scheduled events should uphold our Mission Statement
3. Scheduled events take priority over unscheduled events.
4. Scheduling conflicts should be worked out peaceably by the affected parties. Disputes will be arbitrated by members of the board, or by the Board of Directors as a whole.
5. All events must be sponsored by a current member, who must be present during the event.
6. Donations are encouraged but not required to hold events.
7. Guest access to the facility will be limited as required by the event.
8. Terms and Conditions for events can be dictated and modified by the Board of Directors.

Organizational Meetings

1. Board meetings will attempt to follow the MIBS SRC3 format, and will be held on an as-needed basis.
2. Board meetings will be posted on the Pikes Peak Makerspace Events calendar.
3. For purchases over $200, the request must include a description of how this spending furthers the organization's Tax Exempt purpose (see Mission Statement.)
4. Membership meetings will be posted on the Pikes Peak Makerspace Events calendar.
   1. Prior to the start of each member meeting, time will be set aside to clean the space.
5. The Director shall preside over the membership meetings.
6. If the President is unavailable, the members of the Board of Directors who are present will choose, via consensus, a temporary meeting chair.
7. If no member of the Board is present or consensus can not be reached, the committee chairpersons present will vote to determine the temporary meeting chair.

Committees

Committees are voluntary groups, formed by members in order to achieve certain goals.

Rules

1. Committees must be approved by the Board of Directors.
2. Committee chairpersons are appointed by the Board of Directors.
3. At least 5 members are required to form a committee.
4. The Committee chairperson will be responsible for maintaining the list of committee members and providing reports on the status and activities of the committee.
5. There is no limit to the number of committees a member can serve on.
6. If the number of committee members drops below 5, the committee will have a grace period of 30 days in order to recruit enough members to remain active.
7. Each committee will need to maintain a page on the wiki with at least the following information:
   1. The name of the committee chair
   2. A list of all active members
   3. A brief statement listing the goals or tasks assigned to the committee.
   4. The category tag:

      [[Category:Proposed Committees]]

8. By default binding committee decisions can be made by the chairperson or by majority vote of the committee members. Governance model can be changed by majority vote of the committee members.
9. Committee meetings must be posted on the calendar and announced on the forums.
10. Committees can appoint advisory members, who only have communications access to Pikes Peak Makerspace resources, pending Board of Directors approval.

Active Committees

A list of active committees can be found in the Active Committees category.

Inactive Committees

A list of inactive committees can be found in the Inactive Committees category.

Proposed Committees

A list of proposed committees can be found in the Proposed Committees category.

Commercial Use

The Pikes Peak Makerspace is based on open source ideals and thus encourages its membership to embrace those ideals as well, however members reserve the rights to all of their creations.

Loaning of Tools & Equipment To The Makerspace

Members can generously provide tools or equipment for use in the space, either by donating them outright or by loaning them.

When equipment is loaned, the following conditions apply:

1. All loaned equipment must be marked or labeled with the owner's name
2. The owner must contact the Operations and Facilities Committee so that they can record the following information:
   1. Name of owner
   2. Equipment being loaned
   3. Serial number if available
   4. Terms or conditions of the loan
3. Equipment is loaned subject to the understanding that it is preferable for DMS to own their equipment, rather than borrow it. DMS may seek to buy equipment in order to replace loaned items, which are then returned.
4. Loaned items may be returned at any time, by request of the owner or as determined by the Operations and Facilities Committee.
5. DMS is NOT responsible for maintenance of loaned equipment, but may maintain it as determined by the Operations and Facilities Committee.
6. DMS is NOT responsible for the damage, theft, or loss of equipment. However, efforts will be made to provide reasonably secure storage.

Donations

1. Donations of usable items must be approved by the committee in charge of the location in which the item will be stored/used.
2. A "freebie shelf" is available for items that are free to use/take for all members. The shelf will be periodically cleared by the Ops committee.
3. Donations for the "freebie shelf" will be accepted so long as there is available free space in the designated area, and as long as it does not conflict with rule #5.
4. Donations for the "freebie shelf" that do not fit cannot be left in the space unless approved by the Ops committee
5. The following items will not be accepted for donation:
   1. CRT monitors
   2. Paint
6. Donations to a project are only spent on that project and are spent prior to any DMS allocated money to the same project.
   1. If the project is deemed unsuccessful all remaining funds will be returned to the source.
   2. Allocated money will be returned to the source fund, if more overages remain the money will be returned to the contributor in proportion to their donation.
   3. If the project is deemed successful, accomplishing the stated goal, any unspent allocations will be returned to the committee fund in charge of the project, unspent donations will be returned the contributors according to the proportion of the donation.
7. Donations of motor vehicles must have written approval of 3 board members.

Finances

1. No authorization or allocation can be made in excess of the moneys available in the General Fund.
2. Unless an exception has been given by the Board of Directors, funds which have already been allocated for spending from the General Fund may be spent from the line of credit as long as interest is not accrued and an outstanding balance is not kept.
3. All profits from the sales of items are placed into a related committee's fund (the committee responsible for the item, if applicable) at the Treasurer's discretion.
4. Refunds for membership dues paid within the last 30 days can be authorized ONLY at the discretion of the Treasurer or President.
5. Pikes Peak Makerspace must receive a written invoice or receipt prior to payment for any services or goods. This only applies to vendors who regularly provide a written invoice (or receipt) to their customers. If a best effort is not made to provide the treasurer with a written invoice (or receipt) from the respective vendor:
   1. Pikes Peak Makerspace will not provide payment for the respective goods or services.
   2. If the transaction was already purchased with funds belonging to the Pikes Peak Makerspace, the amount of the respective transaction must be refunded to the Pikes Peak Makerspace.
6. All property purchases equal to or greater than $500 and having an useful life of one year or more are to be capitalized.
7. All individual items purchased for less than $500 and having a useful life of less than one year are to be expensed.
8. Only current procurement officers are allowed to have an active DMS credit card.
   1. After changes in procurement officers, it is the responsibility of the Secretary to ensure the credit card company's records.
9. Only the current President, Secretary, and Treasurer are allowed to be authorized signers on DMS bank accounts.
   1. After a change in President, Secretary, or Treasurer, it is the responsibility of the Secretary to ensure the bank's records are updated.

Notes

These notes are not officially part of the Rules or Bylaws and are only meant to provide additional information or an interpretation of the Rules and/or Bylaws. <references />