3D Printing — Filament (FDM): Difference between revisions

From Pikes Peak Makerspace Wiki
Jump to navigation Jump to search
← Older editNewer edit →
VisualWikitext
Reserve Equipment
Line 28: Line 28:


===Tips===
===Tips===
:Clear the resin trays carefully and completely to avoid cross-contamination.
:Clear the resin trays of the SLA printers carefully and completely to avoid cross-contamination.
:[https://www.simplify3d.com/support/materials-guide/#all '''Ultimate 3D Printing Materials Guide''']
:[https://www.simplify3d.com/support/materials-guide/#all '''Ultimate 3D Printing Materials Guide''']
:'''[https://www.youtube.com/channel/UCLHAxAdvAKJY0niRJZRYMvg Prusa 3D by Josef Prusa] - YouTube channel'''
:'''[https://www.youtube.com/channel/UCLHAxAdvAKJY0niRJZRYMvg Prusa 3D by Josef Prusa] - YouTube channel'''
Line 45: Line 45:
!'''Status<br>Up/Down'''
!'''Status<br>Up/Down'''
!'''Problem<br>Description'''
!'''Problem<br>Description'''
|-
|
|'''Prusa MK2S'''
'''(Haywire)'''
|[https://www.prusa3d.com/ PRUSA RESEARCH]
|Prusa MK2S
|<p style="text-align:right;">$350</p>
|Included
|PPM
|Down
(12/10/21)
|Thermal Runaway.
Needs new bed and backup thermistors.
|-
|-
|
|
Line 54: Line 67:
|Included
|Included
|PPM
|PPM
|Down
|Up
(12/10/21)
|
|
|-
|-
Line 66: Line 80:
|PPM
|PPM
|Down
|Down
(12/10/21)
|MMU (Multi Material Unit) needs repair.
|MMU (Multi Material Unit) needs repair.
<s>Under Warranty?</s>
<s>Under Warranty?</s>
|-
|
|'''Prusa MK2S'''
'''(Haywire)'''
|[https://www.prusa3d.com/ PRUSA RESEARCH]
|Prusa MK2S
|<p style="text-align:right;">$350</p>
|Included
|PPM
|Down
|Needs new bed and backup thermistors.
|-
|-
|[[File:MR T.jpg|alt=MR T 3D printer|center|frameless|200x200px]]
|[[File:MR T.jpg|alt=MR T 3D printer|center|frameless|200x200px]]
Line 116: Line 120:
|[[File:UV Curing Box.jpg|alt=UV Curing Box|200x200px|center|frameless]]
|[[File:UV Curing Box.jpg|alt=UV Curing Box|200x200px|center|frameless]]
|'''UV curing box'''
|'''UV curing box'''
(6x6x10 inches)
|PPM
|PPM
|
|
Line 122: Line 127:
|PPM
|PPM
|Up
|Up
|Description:
|
6x6x10 inches
|-
|-
|[[File:Dryer oven.jpg|alt=Dryer oven|200x200px|center|frameless]]
|[[File:Dryer oven.jpg|alt=Dryer oven|200x200px|center|frameless]]
|'''lab oven / dryer'''  
|'''lab oven / dryer'''  
'''with timer'''
'''with timer'''
(12x12x12 interior)
|Curtin Matheson
|Curtin Matheson
|
|
Line 134: Line 140:
|PPM
|PPM
|Up
|Up
|Description: ~12x12x12 interior
|
|-
|-
|[[File:Filament dryer box.jpg|alt=filament dryer box|200x200px|center|frameless]]
|[[File:Filament dryer box.jpg|alt=filament dryer box|200x200px|center|frameless]]
Line 238: Line 244:
|
|
|
|
|
|<p style="text-align:right;">?</p>
|
|
|PPM
|PPM
Line 248: Line 254:
|
|
|'''computer'''  
|'''computer'''  
'''(Resin machine)'''
'''(Resin&nbsp;machine),'''  
|Custom
 
|N/A
"M-DESIGN-5-G"
|
|
|<p style="text-align:right;">$300</p>
|<p style="text-align:right;">$300</p>
|N/A
|N/A
Line 256: Line 264:
|Working(?)
|Working(?)


but not online
but not online, Windows 10
|
|
|-
|-
|
|
|'''computer'''  
|'''computer'''  
'''(Slicing machine)'''
'''(Slicing&nbsp;machine),'''
|Custom
 
|N/A
'''"M-DESIGN-3-G"'''
|hp
|Z200
|<p style="text-align:right;">$500</p>
|<p style="text-align:right;">$500</p>
|N/A
|N/A
|PPM
|PPM
|Working(?)
|Up
 
|Windows 7
but not online
|
|-
|-
|
|
Line 293: Line 301:
|-
|-
|[[File:Monoprice.jpg|200x200px|alt=|center|frameless]]
|[[File:Monoprice.jpg|200x200px|alt=|center|frameless]]
|'''Monoprice Mini 3D Printer'''
|'''Monoprice Mini 3D&nbsp;Printer'''
|Monoprice
|Monoprice
|Mini E3D Edition
|Mini E3D Edition
Line 300: Line 308:
|PPM
|PPM
|Down
|Down
|Not plugged in. Should work, needs to be tested.
|Not plugged in. Should work, needs to be tested.
SD card only. PLA ONLY.
|-
|-
|[[File:Formlabs Form 2.jpg|alt=Formlabs Form 2 resin printer|200x200px|center|frameless]]
|[[File:Formlabs Form 2.jpg|alt=Formlabs Form 2 resin printer|200x200px|center|frameless]]
Line 311: Line 320:
|PPM
|PPM
|Down
|Down
|Unable to get successful prints.
|Unable to get successful prints. May need new resin.
May need new resin.
|-
|-
|
|

Revision as of 18:12, 10 December 2021

Level 2 icon

The 3D Printing Area at Pikes Peak Makerspace consists mostly of Level 2 equipment.

Additional training is required to use our Level 2 equipment.

 3D Printing Area  hand tools should be marked with orange tape or paint.

Safety First

Members must know the following information:

In case of emergency, call 911.
Our physical location is:
735 East Pikes Peak Avenue
Colorado Springs, CO 80903
  • Emergency sign
    IN CASE OF
    EMERGENCY
    sign

PPM Fire Escape Plan

Fire Escape Plan maps are posted throughout the Makerspace.
There are 7 fire extinguishers on the fire escape plan map.
Review the PPM Fire Escape Plan for locations.
  • PPM Emergency Evacuation Plan 040721
    PPM Emergency
    Evacuation Plan.pdf
  • PPM Fire Prevention Plan 0407022
    PPM Fire
    Prevention Plan.pdf
  • PPM Fire Escape Plan
    PPM Fire Escape
    Plan

First Aid

There is a FIRST AID Supply Cabinet in our Kitchen Area.
FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.
  • FIRST AID Supply Cabinet
    FIRST AID
    Supply Cabinet
  • FIRST AID kit
    FIRST AID
    Kit

Eye Wash Stations

Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.
  • EMERGENCY EYE & FACE WASH STATION
    Emergency
    Eye & Face Wash
    Station

Personal Protective Equipment (PPE)

Wear protective equipment in all Wood and Metal Shop Areas.
Wear gloves when using Isopropyl Alcohol and other cleaners.
Gloves should not be worn when using powered equipment (saws, jointers, drills, or other equipment). Leather gloves can be worn for handling materials, but not when operating machinery.
  • SAFETY GOGGLES
    Personal Protective Equipment (PPE)

Hazardous Chemicals

All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.
Review the Safety Data Sheet (SDS) information of unknown products before use.
SDS information is available via this spreadsheet.
Do not bring dangerous chemicals to the makerspace.
Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.
Please DO NOT paint indoors.
  • flammables cabinet
    Flammables Cabinet
    in the Vented Room

Other Hazards

Avoid placing uncovered (extension) cords, hoses, cables, or wires across the floors of our shops.

Impairment

The use of PPM equipment requires you to be alert, attentive, and focused.
Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.

3D Printing Classes and Training

Area Captain

Trevor Banks

Classes

Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup

Training

Introduction to 3D Printing class info
Intro to SLA 3D Printing class info

For Help

Message in PPM Slack channel #3d-printing

Tips

Clear the resin trays of the SLA printers carefully and completely to avoid cross-contamination.
Ultimate 3D Printing Materials Guide
Prusa 3D by Josef Prusa - YouTube channel

Equipment Lists

3D Printing Equipment
Picture Item Manufacturer Model
Number 		Estimated
Value 		Manual Owner Status
Up/Down 		Problem
Description
Prusa MK2S

(Haywire)

PRUSA RESEARCH Prusa MK2S

$350

 Included PPM Down

(12/10/21)

Thermal Runaway.

Needs new bed and backup thermistors.

Prusa Mk2s

(Medussa)

PRUSA RESEARCH N/A

$1,000

 Included PPM Up

(12/10/21)

Prusa Mk2s

MMU2

PRUSA RESEARCH Included PPM Down

(12/10/21)

MMU (Multi Material Unit) needs repair.

Under Warranty?

MR T 3D printer
 Taz 5

(MR. T)

LULZBOT Taz 5

$1,200

 Included PPM Down
File:Vinyl sign.jpg
 Taz 5

(TIZZY)

LULZBOT Taz 5,

KITTAZ

$1,200

 Included PPM Down Under Repair (12/06/21)
ANYCUBIC 3D Printer
 ANYCUBIC PHOTON MONO 2K

resin printer

Anycubic N/A

$200

 N/A PPM Up
UV Curing Box
 UV curing box

(6x6x10 inches)

PPM PPM Up
Dryer oven
 lab oven / dryer

with timer

(12x12x12 interior)

Curtin Matheson (none) PPM Up
filament dryer box
 filament dryer box PPM N/A PPM Up
Fume Extractor
 Fume Extractor PACE 8888-0825 none PPM ? needs filters, probably
3Doodler create
 3Doodler create STAR TREK PPM
INFRARED THERMOMETER
 INFRARED THERMOMETER CEN-TECH PPM Up
Picture Item Manufacturer Model
Number 		Estimated
Value 		Manual Owner Status
Up/Down 		Problem
Description
3D Printing Computer
Picture Item Manufacturer Model
Number 		Estimated
Value 		Manual Owner Status
Up/Down 		Problem
Description
computer

(laptop)

hp EliteBook 8570w PPM Up
Picture Item Manufacturer Model
Number 		Estimated
Value 		Manual Owner Status
Up/Down 		Problem
Description
3D Printing - Not Working
Picture Item Manufacturer Model
Number 		Estimated
Value 		Manual Owner Status

Up/Down

Problem
Description
various Raspberry Pi boards

?

 PPM Working(?)

but not online

computer

(Resin machine),

"M-DESIGN-5-G"

$300

 N/A PPM Working(?)

but not online, Windows 10

computer

(Slicing machine),

"M-DESIGN-3-G"

hp Z200

$500

 N/A PPM Up Windows 7
hot air material (pellet) dryer Plastic Process Equipment THD-U SERIES

?

 Yes PPM (donated by TITAN ROBOTICS) Down Under construction
3D Printer
(high temp) 		Stratasys N/A

$1,000

 N/A PPM (donated by TITAN ROBOTICS) Down Under construction
File:Monoprice.jpg
 Monoprice Mini 3D Printer Monoprice Mini E3D Edition

$75

 N/A PPM Down Not plugged in. Should work, needs to be tested.

SD card only. PLA ONLY.

Formlabs Form 2 resin printer
 Form 2

resin printer

Form Form 2

$2,500

 Included PPM Down Unable to get successful prints. May need new resin.
RapMan 3

3D Printer

Unknown RapMan 3

$100

 N/A PPM Down Needs board wired and power supply hooked up.
Picture Item Manufacturer Model
Number 		Estimated
Value 		Manual Owner Status
Up/Down 		Problem
Description

Hand Tools

Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Donations Received

Wish List

Policies

PPE

Donate for PPE
Or, leave donations in a black payment box, or use a QR code.

Reserve Equipment

Materials

Donate for "3D Print Filament": bit.ly/ppmstuff
Filament Cost $0.029 per Gram
Or, leave donations in a black payment box, or use a QR code.

Scrap and Trash

Separate scrap PLA and PETG plastics from Trash, so the plastics can be recycled.

Software

Modeling sw

Fusion 360

Slicing sw

PrusaSlicer
Lychee Slicer (free version) for ANYCUBIC resin printer

Server sw

Repetier-Server

Showcase

Photo Gallery

(Displayed in random order.)

PPM YouTube Channel

"featured" videos, (the YouTube "HOME" tab)
"Things we've built", Created playlists, including 3D-printed robotic hand (2015)

Other Fun Stuff

"Wear you some gloves.", https://shop.crafnation.com/product/wearyousomegloves

Make QR Codes

Lithophane Links

Retrieved from "https://wiki.pikespeakmakerspace.org/index.php?title=3D_Printing_—_Filament_(FDM)&oldid=1551"