Difference between revisions of "Wood Shop"
Jump to navigation
Jump to search
Line 99: | Line 99: | ||
|Porter Cable | |Porter Cable | ||
| | | | ||
− | |$500 | + | |$500 |
| | | | ||
|PPM | |PPM | ||
Line 109: | Line 109: | ||
|Delta | |Delta | ||
| | | | ||
− | |$100 | + | |$100 |
| | | | ||
|PPM | |PPM | ||
Line 119: | Line 119: | ||
|Dewalt | |Dewalt | ||
|DW708 | |DW708 | ||
− | |$350 | + | |$350 |
| | | | ||
|'''Les''' | |'''Les''' | ||
Line 129: | Line 129: | ||
|WEN | |WEN | ||
|6502T | |6502T | ||
− | |$140 | + | |$140 |
| | | | ||
|PPM | |PPM | ||
Line 139: | Line 139: | ||
|Central Machinery | |Central Machinery | ||
|97181 | |97181 | ||
− | |$78 | + | |$78 |
| | | | ||
|PPM | |PPM | ||
Line 149: | Line 149: | ||
|Jet | |Jet | ||
| | | | ||
− | |$800 | + | |$800 |
| | | | ||
|'''Bill Epperson''' | |'''Bill Epperson''' | ||
Line 159: | Line 159: | ||
|Dust Deputy & Craftsmen | |Dust Deputy & Craftsmen | ||
| | | | ||
− | |$150 | + | |$150 |
| | | | ||
|PPM | |PPM | ||
Line 169: | Line 169: | ||
|Delta | |Delta | ||
| | | | ||
− | |$550 | + | |$550 |
| | | | ||
|PPM | |PPM | ||
Line 179: | Line 179: | ||
| | | | ||
| | | | ||
− | |$150 | + | |$150 |
| | | | ||
|PPM | |PPM | ||
Line 189: | Line 189: | ||
|Festool | |Festool | ||
| | | | ||
− | |$760 | + | |$760 |
| | | | ||
|'''John Norton''' | |'''John Norton''' | ||
Line 199: | Line 199: | ||
|Festool | |Festool | ||
|T55 | |T55 | ||
− | |$550 | + | |$550 |
| | | | ||
|'''John Norton''' | |'''John Norton''' | ||
Line 209: | Line 209: | ||
|Festool | |Festool | ||
| | | | ||
− | |$350 | + | |$350 |
| | | | ||
|'''John Norton''' | |'''John Norton''' | ||
Line 219: | Line 219: | ||
|Festool | |Festool | ||
| | | | ||
− | |$350 | + | |$350 |
| | | | ||
|'''John Norton''' | |'''John Norton''' | ||
Line 229: | Line 229: | ||
|Festool | |Festool | ||
|CT26 ??? | |CT26 ??? | ||
− | |$600 | + | |$600 |
| | | | ||
|'''John Norton''' | |'''John Norton''' | ||
Line 239: | Line 239: | ||
|Dremel | |Dremel | ||
| | | | ||
− | |$75 | + | |$75 |
| | | | ||
|PPM | |PPM | ||
Line 274: | Line 274: | ||
|Quick Grip | |Quick Grip | ||
|2 | |2 | ||
− | |$36 | + | |$36 |
|'''Bill Epperson''' | |'''Bill Epperson''' | ||
| | | | ||
Line 284: | Line 284: | ||
|Quick Grip | |Quick Grip | ||
|2 | |2 | ||
− | |$10 | + | |$10 |
|PPM | |PPM | ||
| | | | ||
Line 294: | Line 294: | ||
|Quick Grip | |Quick Grip | ||
|2 | |2 | ||
− | |$12 | + | |$12 |
|PPM | |PPM | ||
| | | | ||
Line 304: | Line 304: | ||
| | | | ||
|4 | |4 | ||
− | |$20 | + | |$20 |
|'''Bill Epperson''' | |'''Bill Epperson''' | ||
| | | | ||
Line 314: | Line 314: | ||
| | | | ||
|2 | |2 | ||
− | |$20 | + | |$20 |
|'''Bill Epperson''' | |'''Bill Epperson''' | ||
| | | | ||
Line 324: | Line 324: | ||
| | | | ||
|0 | |0 | ||
− | |$20 | + | |$20 |
|'''Bill Epperson''' | |'''Bill Epperson''' | ||
| | | | ||
Line 334: | Line 334: | ||
| | | | ||
|2 | |2 | ||
− | | $3 | + | | $3 |
|'''Bill Epperson''' | |'''Bill Epperson''' | ||
| | | | ||
Line 364: | Line 364: | ||
| | | | ||
| 2 | | 2 | ||
− | |$6 | + | |$6 |
|'''???''' | |'''???''' | ||
| | | | ||
Line 404: | Line 404: | ||
| | | | ||
|6 | |6 | ||
− | |$4 | + | |$4 |
| | | | ||
| | | | ||
Line 443: | Line 443: | ||
|'''Biscuit Jointer''' | |'''Biscuit Jointer''' | ||
|Craftsman | |Craftsman | ||
− | |$130 | + | |$130 |
|PPM | |PPM | ||
| | | | ||
Line 451: | Line 451: | ||
|'''Jigsaw''' | |'''Jigsaw''' | ||
|Dewalt | |Dewalt | ||
− | |$150 | + | |$150 |
|PPM | |PPM | ||
| | | | ||
Line 467: | Line 467: | ||
|'''Sawsall''' | |'''Sawsall''' | ||
|Dewalt | |Dewalt | ||
− | |$100 | + | |$100 |
|PPM | |PPM | ||
| | | | ||
Line 483: | Line 483: | ||
|'''Orbital Sander''' | |'''Orbital Sander''' | ||
|Ryobi | |Ryobi | ||
− | |$75 | + | |$75 |
|PPM | |PPM | ||
| | | | ||
Line 491: | Line 491: | ||
|'''Belt Sander''' | |'''Belt Sander''' | ||
|Craftsman | |Craftsman | ||
− | |$50 | + | |$50 |
|PPM | |PPM | ||
| | | | ||
Line 507: | Line 507: | ||
|'''Circular Saw''' | |'''Circular Saw''' | ||
|Craftsman | |Craftsman | ||
− | |$50 | + | |$50 |
|PPM | |PPM | ||
| | | | ||
Line 516: | Line 516: | ||
'''Mouse Detail Sander''' | '''Mouse Detail Sander''' | ||
| | | | ||
− | |$25 | + | |$25 |
|PPM | |PPM | ||
| | | |
Revision as of 21:45, 4 December 2021
The Wood Shop Area at Pikes Peak Makerspace consists mostly of Level 2 equipment.
Additional training is required to use our Level 2 equipment.
Wood Shop Area hand tools should be marked with green tape or paint.
Safety First
Members must know the following information:
- In case of emergency, call 911.
- Our physical location is:
- 735 East Pikes Peak Avenue
- Colorado Springs, CO 80903
- use this when ordering pizza or an ambulance
PPM Fire Escape Plan
- Fire Escape Plan maps are posted throughout the Makerspace.
- There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.
First Aid
- There is a FIRST AID Supply Cabinet in our Kitchen Area.
- FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.
Eye Wash Stations
- Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.
Personal Protective Equipment (PPE)
- Wear protective equipment in all Wood and Metal Shop Areas.
- Wear gloves when using Isopropyl Alcohol and other cleaners.
Hazardous Chemicals
- All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.
- Review the Safety Data Sheet (SDS) information of unknown products before use.
- SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.
- Do not bring dangerous chemicals to the makerspace.
- Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.
- Please DO NOT paint indoors.
Impairment
- The use of PPM equipment requires you to be alert, attentive, and focused.
- Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.
Classes and Training
Area Captain(s)
Classes
- Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup
For Help
- Message in PPM Slack channel #wood-shop
Tips
- Leave the space better than you found it.
- Let the tool do the work. Don't force it.
The following pages contain historical information. The pages are provided for reference only.
- Introduction to Woodworking (14:45, 15 November 2015)
- Table saw (08:08, 25 November 2015)
- Woodworking terminology
Equipment Lists
Picture | Item | Manufacturer | Model Number |
Estimated Value |
Manual | Owner | Status | Problem Description |
---|---|---|---|---|---|---|---|---|
Mo | lathe | POWERMATIC | $7,000 | PPM | ||||
bandsaw | POWERMATIC | $900 | PPM | |||||
table saw | POWERMATIC | $1,500 | PPM | |||||
Picture | Item | Manufacturer | Model Number |
Estimated Value |
Manual | Owner | Status | Problem Description |
Picture | Item | Manufacturer | Model Number |
Estimated Value |
Manual | Owner | Status | Problem Description |
---|---|---|---|---|---|---|---|---|
Floor drill press | Porter Cable | $500 | PPM | |||||
10" benchtop bandsaw | Delta | $100 | PPM | |||||
12" Sliding Compound Miter Saw | Dewalt | DW708 | $350 | Les | ||||
6" Disk 4" Belt Sander | WEN | 6502T | $140 | PPM | ||||
6" Disk 4" Belt Sander | Central Machinery | 97181 | $78 | PPM | ||||
Free standing 6" Horizontal Belt Sander | Jet | $800 | Bill Epperson | |||||
Free standing dust collector & vacuum | Dust Deputy & Craftsmen | $150 | PPM | |||||
Dust Collector 1.5HP 6" inlet | Delta | $550 | PPM | |||||
Large scroll saw | $150 | PPM | Needs parts and rebuilt | Missing motor | ||||
Festool 1080 Table | Festool | $760 | John Norton | |||||
Festool Track Saw | Festool | T55 | $550 | John Norton | ||||
Festool Sander (Rectangular) | Festool | $350 | John Norton | |||||
Festool Orbital Sander | Festool | $350 | John Norton | |||||
Festool Dust Collector | Festool | CT26 ??? | $600 | John Norton | ||||
1" x 30" belt & 5" disk sander | Dremel | $75 | PPM | |||||
Picture | Item | Manufacturer | Model Number |
Estimated Value |
Manual | Owner | Status | Problem Description |
Picture | Item | Manufacturer | Quantity | Price Each |
Owner | Status | Problem Description | |
---|---|---|---|---|---|---|---|---|
36" Quick Clamp | Irwin | Quick Grip | 2 | $36 | Bill Epperson | |||
8" Quick Clamp | Irwin | Quick Grip | 2 | $10 | PPM | |||
12" Quick Clamp | Irwin | Quick Grip | 2 | $12 | PPM | |||
30" Bessey Pipe Bar Clamp | Bessey | 4 | $20 | Bill Epperson | ||||
48" Bessey Pipe Bar Clamp | Bessey | 2 | $20 | Bill Epperson | ||||
60" Bessey Pipe Bar Clamp | Bessey | 0 | $20 | Bill Epperson | ||||
6" Quick Release Bar Clamp | Pittsburgh | 2 | $3 | Bill Epperson | ||||
12" Quick Release Bar Clamp | Pittsburgh | 0 | ||||||
18" Quick Release Bar Clamp | Pittsburgh | 0 | ||||||
24" Quick Release Bar Clamp | Pittsburgh | 2 | $6 | ??? | ||||
30" Quick Release Bar Clamp | Pittsburgh | 0 | ||||||
36" Quick Release Bar Clamp | Pittsburgh | 0 | ||||||
6" Ratcheting Bar Clamp | Pittsburgh | 0 | ||||||
12" Ratcheting Bar Clamp | Pittsburgh | 6 | $4 | |||||
24" Ratcheting Bar Clamp | Pittsburgh | 0 | ||||||
Picture | Item | Manufacturer | Quantity | Price Each |
Owner | Status | Problem Description |
Picture | Item | Manufacturer | Estimated Value |
Owner | Status | Problem Description |
---|---|---|---|---|---|---|
Biscuit Jointer | Craftsman | $130 | PPM | |||
Jigsaw | Dewalt | $150 | PPM | |||
Jigsaw | PPM | |||||
Sawsall | Dewalt | $100 | PPM | |||
Orbital Sander | PPM | |||||
Orbital Sander | Ryobi | $75 | PPM | |||
Belt Sander | Craftsman | $50 | PPM | |||
Belt Sander | Ryobi | ??? | ||||
Circular Saw | Craftsman | $50 | PPM | |||
Mouse Detail Sander |
$25 | PPM | ||||
Picture | Item | Manufacturer | Estimated Value |
Owner | Status | Problem Description |
Hand Tools
- Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.
Donations Received
Wish List
Policies
PPE
- Wear eye and ear protection in the Wood Shop Area
Materials
- Donate for "Sheet Goods" via PayPal: bit.ly/ppmstuff
- Or, leave donations in a black payment box, or use a QR code.
- Help Us Keep Stocked Up!
Scrap and Trash
Software
- Fusion 360
- VCarve
Showcase
Photo Gallery
- Wood shop tool sign.jpg
Wood shop tool sign